Everich V2 Balance Bike Instruction Manual
- June 17, 2024
- Everich
Table of Contents
Everich V2 Balance Bike
Product Specifications
- Product Name: 30cm Balance Bike
- Keycode: 43297832
- Type: No Pedal Training Bicycle
- Maximum Child Weight: 25 kg
Product Usage Instructions
Assembly Instructions:
- Step 1: Insert the front fork (without front and rear distinction).
- Step 2: Replace the clamp onto the top of the fork tube ensuring minimum insertion depth.
- Step 3: Insert the handlebar into the fork tube, tighten the screw with a hex key, and put down the T bar cap. Ensure alignment of handlebar and wheels.
- Step 4: Insert the seat and tighten the screw of the clamp under the seat.
- Additional Adjustment: Use a wrench to adjust the screws of the brake if necessary.
Note: Check the clamp bolts for tightness before riding. Ensure that the seat tube and handlebar steerer tube are inserted until the minimum insertion line indicated on the tube is covered.
Frequently Asked Questions (FAQ)
-
Q: What is the maximum weight capacity for this balance bike?
A: The maximum weight limit for this balance bike is 25 kg. It is not recommended for children exceeding this weight. -
Q: Can this balance bike be used on wet surfaces or unpaved roads?
A: It is advised not to use this balance bike on wet surfaces, uneven terrain, or unpaved roads for safety reasons. Please ensure usage on smooth and dry surfaces under adult supervision. -
Q: Is assembly difficult for this balance bike?
A: Assembly requires adult supervision due to small assembly components with functional sharp points and edges. Follow the provided instructions carefully for proper assembly.
30cm Balance Bike
Keycode: 43297832
Instruction Manual
No Pedal Training Bicycle
- built with strong carbon steel
- rear caliper brake
- adjustable saddle and handlebar
- widened and wear-resistant pneumatic tire
- maximum loading weight: 25kg
- lightweight bicycle: 4.1kg
WARNING: ITEM TO BE ASSEMBLED BY ADULT ONLY. CHOKING HAZARD. CONTAINS SMALL ASSEMBLY COMPONENTS WITH FUNCTIONAL SHARP POINTS AND EDGES.
WARNING! PROTECTIVE EQUIPMENT SHOULD BE WORN. NOT FOR CHILDREN WITH A BODY MASS OF MORE THAN 25 KG, DO NOT USE ON WET SURFACES, UNEVEN OR UNPAVED ROAD. DO NOT USE ON PUBLIC ROADS OR IN TRAFFIC. USE ONLY UNDER ADULT SUPERVISION.
Assembly
30cm Balance Bik
Please Assemble As Instructions
- Step 1 : Insert the front fork (without front and rear distinction)
- Step 2: Replace the clamp onto to p of fork tube
- Step 3: Insert handlebar into fork tube, and tighten the screw with hex key as Pic 1, then put down the T bar cap as Pic 2, please note align handlebar and wheels
- Step 4: Insert seat, then tighten the screw of clamp under the seat
- If necessary, use the wrench to adjust the screws of brake
Spare part
WARNING
- please check clamp bolts for tightness before riding.
- The seat tube and the handlebar steerer tube must be inserted until the minimum insertion line indicated on tube is covered.