Home Kitchen P10 Automatic Foaming Soap Dispenser User Manual

Home Kitchen P10 Automatic Foaming Soap Dispenser

Product Information

Specifications

• Product Name: Automatic Soap Dispenser
• Power Supply: Battery operated
• Indicator: LED indicator for battery and operation status
• Sensor: Infrared sensor for touchless operation

Frequently Asked Questions

• Q: How do I change the liquid soap in the dispenser?
  • A: To change the liquid soap, open the dispenser compartment, remove the empty soap container, and refill it with your desired liquid soap. Ensure the dispenser is turned off during this process.
• Q: How often should I charge the device?
  • A: It is recommended to charge the device when the battery is low or exhausted. Regularly check the battery indicator to monitor the battery level.

Product Introduction

Machine structure

Product Parameter

• Model Number: P10
• Rated power: 1.5W
• Power supply: Lithium Battery
• Turn on: touch+ sensor
• Sensing speed: 0.255
• Sensing distance: 0-70mm
• Dispensing time: 0.3/0.8/1.5/2.0s (4 gears)
• Bottle capacity: 420ML
• N.W.: 261g(not include soap)
• G.W.: 377g(not include soap)
• Working temperature: 5°C~35°C
• Water proof: IPX5
• Working humidity: 0% ~85%

Accessories

Function

• Turn on: press touch area, LED1 will be lighted for 2s
• Turn off: Long press touch area for 2s, LED1& LED4 will flash for 3s
• Gear switch: press power button, then the gear can be witched accordingly

Gear illustration:

1. 1st gear- LED1 lighted (dispensing 0.35)
2. 2nd gear-LED1, LED2 both lighted (dispensing 0.85)
3. 3rd gear- LED1, LED2, LED3 all lighted (dispensing 1.55)
4. 4th gear- LED1, LED2, LED3, LED4 all lighted (dispensing 2.0s )

• Lower battery: The led light will be flashing 5s then turn off automatically
• Sensing: Put your hand below the dispensing mouth, keep your hand in a distance range of 0-70mm, then the machine will dispense the soap you need.
• Cleaning mode: Turn on the machine and triple click the power button to start the cleaning mode. The machine will automatically turn off the cleaning mode after 10 seconds, or you can click the power button to turn it off.

Note

• The soap dispenser will enter a standby mode if it do not work for a long time, no need to turn it off yourself.

Set up

1. Turn 90 degrees counterclockwise to unscrew the bottle
2. Fill with suitable liquid soap into the bottle
3. Align the bottle mouth card position with the body card position, rotate the bottle 90 degrees clockwise,  and set the bottle Sub-installation host

Stop Sprayed out Troubleshooting

1. Cut off a small part with scissors from the dredge bottle mouth.
2. Fill the dredge bottle with clean water.
3. Unscrew the soap dispenser and pull of the filter head and the end of the hose.
4. Insert the dredge bottle into the hose and fill the hose with water until it comes out from the nozzle.

Safety Information

Notes

1. This unit and accessories are not toys, do not put them in the place where the kids can touch.
2. Do not pull the power cord with wet hands to prevent the power cord from sticking to liquid
3. Please make sure the adapter and power cord are dry
4. This product contains a built-in rechargeable battery, please do not throw it into the fire, or charge, use or leave it in a high temperature place
5. Do not use when the power cord or adapter is damaged, or when the power cord socket is loose The symbol on the right indicates that the body cannot be cleaned under the water dragon and ice dragon

Note

1. Please make sure the power cord is dry and do not rinse the machine with water
2. Before connecting the product to charge, please make sure that the voltage marked on the product matches the local power supply voltage
3. Please use and store the product at a temperature between 5°C and 35°C
4. When you find any abnormality or failure of this product, please stop using it immediately, and deal with it according to the type of failure
5. Do not disassemble the body to replace the battery
6. Do not immerse this product in water or any liquid
7. Do not knock or drop the product. If the product is damaged due to a collision or fall, please stop using it
8. Persons (including children) who are physically unsound, mentally impaired, and lack relevant experience and knowledge (including children) should use under the supervision and guidance of their guardian

Repair and maintenance

1. If you need to clean, it is recommended to use a wet towel to gently wipe the surface of the phone when it is turned off
2. After the product is charged, the soft rubber plug of the charging port needs to be plugged to prevent water from entering
3. If this product is left unused for a long time, please take out the hand sanitizer to avoid deterioration of the liquid

Notes:

1. Do not immerse the product in water or rinse directly with water to avoid short circuit
2. When installing or replacing the hand sanitizer, do not tilt the bottle body. If a small amount of liquid flows out, it is normal. It can be used normally after wiping it off.
3. Do not use non-dedicated hand sanitizer for replacement, so as not to cause machine failure
4. Store this product in a cool place, away from direct sunlight or close to heat sources
5. In the event of water spraying, upside-down, or tilting, it is necessary to confirm whether the machine has entered liquid in time, if necessary, wipe it and dry it before continuing to use

Troubleshooting

Troubleshooting table

Documents / Resources

| Home Kitchen P10 Automatic Foaming Soap Dispenser [pdf] User Manual
P10 Automatic Foaming Soap Dispenser, P10, Automatic Foaming Soap Dispenser, Foaming Soap Dispenser, Soap Dispenser, Dispenser
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>