Sami WS-2385 Wearable Watch User Manual
- June 17, 2024
- Sami
Table of Contents
Sami WS-2385 Wearable Watch
Introduction
Thank you for purchasing the Sami wearable WS-2385. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.
Touch and Key Operation Instructions
Touch Operating instructions| slide down| Control Interface| Right slip| Quick
Sidebar
---|---|---|---|---
Up slide| SMS notification| Left slip| Shortcuts
Long press on the screen| Dial switching| |
Watch Charging
Connect the device to a computer or laptop with the USB Magnetic cable for
charging. Put in contact the magnetic charging cable with the charging points
positioned in the back of your device. Kindly use only the USB cable included
with the wearable. If you use a power adapter for charging, the output of the
power adapter should be 5V, 1A. Charging time: 1:30 – 2 hours. Please charge
the device fully before using it. Take care with the magnet side of the cable,
if you connect to the AC and you have contact with a metal surface, you may
damage the charging cable.
HOW TO POWER ON / POWER OFF?
- To turn ON the smart band, long press the Power On/Off button for few seconds to make it Power On.
- To turn OFF the smart band, long press the Power On/Off button for few seconds until the Power OFF icon displays, then select “Yes” to make it Power Off; or on the home screen of your smart band , tap and slide from top to bottom to enter in the shortcut menu; tap in the settings icon and scroll down to find the power off icon, tap on it and then select “Yes” to make it Power Off
HOW TO CONTROL?
- On the display screen(touchscreen), short tap the touchscreen to select; tap and slide left/ right/ up/ down to change between the different menu pages.
- Short press the Power On/Off button to return. Long press the Power On/Off Button to make it Power On/Off.
PRODUCT FEATURES
- BLUETOOTH (V BLE 5.0)AMOLED TOUCH SCREEN. Full Touch IPS Screen 1.27″
- BUILT IN VIBRATING MOTOR
- BUILD IN HEART RATE SENSOR
- BUILD IN GRAVITY SENSOR
- GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN (Quick View)
- WATER PROOF 3 ATM
Connect the watch
For Android
- How to obtain the BT Connection APK (DA FIT) Search for the DA FIT APP in the Play Store; download it and install it in your Android smartphone, or go to our website www.sami.es and download the application.
- Installation of the DA FIT APK. When installing the DA FIT application on your Android, you must allow all the Application Permissions, allow this DA FIT app auto run. The first time you run this DA FIT, it will ask you to Enable Notifications, please tap OK and tap the DA FIT and confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission management, allow all application permissions.
- How to make the wearable pair with your Android smart phone
- First, turn on the Bluetooth of your Phone. *Second, run the DA FIT app on your Phone, on the home page of DA FIT, select “ADD A DEVICE”, the APP will search for new Bluetooth device(s), when the available Bluetooth device displays, please select WS-2385(the BT name of this device) to make it pair. The pairing will be finished in a few seconds. When you pair for the first time, the app DA FIT will ask you to fill some personal information such as gender/age/height/weight. When you finish select OK/Confirm/Allow for any pop-up request.
- Now you can start using your desired functions of the smart band.
Important: To enable all notifications of different software’s such as WhatsApp, Facebook, Skype, Twitter, you may need to turn on the notifications on the APP manually. On the DA FIT homepage, select the Settings icon (middle icon situated at the bottom of the interface) →then select notifications, → and turn on all the APP notifications you want to active.
For iPhone
- How to obtain the BT Connection APP? (DA FIT) On iPhone, please go to APP Store and search DA FIT and install the app.
- How to make the wearable pair with your iPhone First, turn on the Bluetooth of iPhone Run the DA FIT app on the iPhone, on the home page of DA FIT, tap “ADD A DEVICE” the APP will search for new Bluetooth device(s), when the available Bluetooth device displays, please tap WS-2385(the BT name of this device) to make it pair. The pairing will be finished in few seconds. When you pair for the first time, the app DA FIT will ask you to fill some personal information such as gender/age/height/weight. When you finish select OK/Confirm/Allow for any pop-up request.
Function Introduction
-
Dial Mode
Press and hold for three seconds on the dial interface in the center of the screen to switch between different dials
-
UI Style
8 different UI styles for easy switching -
Control
Pull down at the and operate basic -
Center
top of the screen to quickly view system settings
-
Information Push
After Bluetooth connection to the mobile app, you will receive the push notifications. -
Activity
Swipe the screen to the left to enter the exercise status interface, where you can view the current steps, distance, and calorie status. Based on the current walking steps, you can synchronize to the app to view motion data
-
Heart Rate:
Place the watch close to the wrist, with the best wearing position above the wrist bone and arm. Click patiently to wait for 30-60 seconds to measure the real-time heart rate value. The normal value is 50-100 beats per minute, and you can also view the heart rate record by sliding up
Heart Rate
-
Blood oxygen:
Place the watch close to the wrist, with the best wearing position above the wrist bone and arm. Click patiently to wait for 30-60 seconds to measure the real-time heart oxygen value. The normal range is usually between 95% and 100%, and you can also view the blood oxygen record by sliding up
Blood Oxygen
-
Blood pressure:
Place the watch close to the wrist, with the best wearing position above the wrist bone and arm. Click patiently to wait for 30-60 seconds to measure real- time blood pressure values. Adult diastolic blood pressure: 60-80 (mmHg), adult systolic blood pressure: 100-120 (mmHg), and slide up to view blood pressure records
Blood Pressure
-
Sleep
Swipe the screen to the left to enter the sleep status interface, activate the sleep monitoring function, and detect sleep quality during sleep. You can view data such as sleep duration, deep sleep, and light sleep
-
Weather
Once connected the app you will have all the information displayed in this interface.
-
Motion
Press the bottom right function key to quickly enter sports mode
** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE APPROXIMATE**
CLEANING:
In order to avoid any damage on the plating or printing of your wearable please do not use any chemical product for cleaning such as alcohol 96º. We recommend you to use a slightly wet cloth.
TECHNICAL SPECIFICATIONS:
Display screen: 1.27″ IPS screen
Screen resolution: 360 x 360 pixels.
Internal Memory: 128mb ROM
System: Nucleus
CPU: JL 7013A6
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 300 mAh
Stand by time: 7-12 DAYS
Working time: 4-8 DAYS
G-Sensor: DA267-LGA12
Health Sensor: HRS3605
Bluetooth: BLE v5.0
Water-resist Rating: 3ATM this device resists 30 meters waterproof
(3ATM). Not valid for hot water shower due to vapor.
Weight: 41 g
Declaration of Conformity
Hereby we,
Name of manufacturer: SANTOSHI SL
Address: CALLE FELIPE ASENJO N.56
Zip code & City: 28947 – FUENLABRADA ( MADRID )
Country: SPAIN
Declare that this DoC is issued under our sole responsibility and that this product:
Product description: Smart Band
Type designation(s): WS-2385
Trademark: SAMI WEARABLE
Is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVELVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
With reference to the following standards applied:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 01/12/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>