DEKALA ACA-002-PRO-B Sunrise Pro Wake Up Light User Manual

Sunrise Pro Wake Up Light
ACA-002-PRO-B

Product Overview

Get Started

1. Power Connection: Connect the Wake-up Light to the DC cable and adapter provided, then plug it into a power source to power it.
   

2. FM Radio Reception: Loosen the tie that secures the FM antenna and unroll the wire to improve FM radio signal reception.
   

3. Power On/Off: Important: This product does not have a power on/off button. It will turn on automatically once the power adapter is plugged into a socket. To disconnect power, please unplug the power adapter.

Features

| 12/24H Time Display
---|---
| Sunrise Simulation
| 10 Ambient Lights
| Dual Alarm Clocks
| 8 kinds of Sleeping Sound
| USB Electronic Device Charging Port
| Button Battery
| Adjustable LCD Time Display Brightness
| Sunset Simulation
| FM Radio 76.0-108.0 MHz
| 7 kinds of Ringing Sound
| Snooze Function
| DC Outlets Powered

Clock & Display Setting

Basic principle for setting up all functions is as follows:

1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the function key again to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.

The required buttons are: Setting button and buttons:

1. Setting Button: Long press to enter settings and press to confirm parameters
2. Buttons: Used to select parameter values.

Setting steps:

Setting time display brightness:

1. Operation instruction: Press setting to switch display contrast.
2. There are four levels of time display brightness: Off, Night, Day, and Auto.
   Auto: The screen brightness is set to the Night level between 10:00 PM and 6:00 AM, and at the Day level during all other times.
   *Please note that the time display brightness in night mode can only be clearly seen in a completely dark environment.

Time setting process diagram:

Note:
The wake-up light cannot enter time-setting mode when the time is not displayed.

Sunrise Alarm Clock Setting

Basic principle for setting up all functions is as follows:

1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the function key again to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.

The required buttons are: Alarm button and buttons:

1. Alarm Button: Long press to enter settings and press to confirm parameters.
2. Buttons: Rotate to select parameter values.

Setting steps:

sunrise duration

Switching the alarm on/off:

1. Press alarm 1 or alarm 2 if you want to switch the alarm on or off.
2. The corresponding icon appears on the display when you switch on the alarm.
   It disappears when you switch off the alarm.

Sunrise alarm clock process diagram:

Note:
*4: When setting repeat day:

Icon| | |
---|---|---|---
Repeat| Everyday| Monday-Friday| Saturday – Sunday

*6: When setting alarm sound:

Icon| | |
---|---|---|---
Sound| No alarm sound| Alarm sounds| FM radio

*7: When setting sunrise duration:

Icon| | |
---|---|---|---
Duration| No wake-up light| Light and sound go
off at the same time| Gradual light increases
5-120 mins prior to alarm

Snooze

When the alarm sound is played at the set time, you can tap on the top button of the Wake-up Light to snooze for a while. The alarm sound and light stop. After 9 minutes, the alarm sound and light are automatically played again. Do not hit the Wake-up Light  with too much force, as this may cause damage.
Snooze process diagram:

Note:

1. The alarm 1 or alarm 2 icon flashes on the display when the alarm is snoozed. Snooze up to 5 times.
2. If there is no action within 15 minutes of the alarm going off, it will automatically stop.

Ambient Lamp

This product offers 10 vibrant and rich ambient lighting effects suitable for various environments, such as sunrise, rainbow, and breathe.

The required buttons are: Light button and buttons:

1. Light: Tap to turn on or off the ambient light, long press to cycle through lighting effects.
2. Buttons: Used to select light brightness.

Ambient lamp process diagram:

Tips:
In C03 mode, rotate the top button to adjust the breathing speed.
In C10 mode, rotate the top button to adjust the color of the light.

Sleep-aid Setting

Basic principle for setting up all functions is as follows:

1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the function key again to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.

The required buttons are: Sleep-aid button and buttons:

1. Sleep-aid: Long press to enter settings and press to confirm parameters.
2. Buttons: Used to select parameter values.

Setting steps:

Long press to
start setting| Set sleep-aid
duration| Choose
sleep sound| Set volume of
sleep sound| Set light of
sleep-aid

Switching the sleep-aid on/off:

1. Press sleep-aid button if you want to switch the sleep-aid on.
2. Press sleep-aid or Snooze button if you want to switch the sleep-aid off. The corresponding icon appears on the display when you switch on the sleep-aid. It disappears when you switch off the sleep-aid

Sleep-aid process diagram:

Note:
*2: When setting sleep-aid duration:

Icon| |
---|---|---
Duration| Play 5-120 minutes| Play until you stop it

*3: When choose sleep sound:

Icon| | |
---|---|---|---
Sound| No sleep sound| Sleep sound| FM radio

*5: When setting light of sleep-aid:

Icon| |
---|---|---
Duration| No sleep-aid light| Different lighting effect

FM Radio

The FM Radio feature allows you to tune in to your favorite stations and enjoy high-quality sound. With a simple push of a button, you can search for the station you want, adjust the volume, and immerse yourself in your preferred music or talk show.
The required buttons are: FM Radio button, button and buttons:

1. Button: Hold the radio button down for 2 seconds, the clock will scan all the available stations.
2. Button: To tune to a specific frequency, rotate the top button ****left or right to adjust the frequency in increments of 0.1 MHz.
3. Buttons: To switch between saved stations, press and hold the ****button for 2 seconds, and the radio will automatically switch to the stations saved through automatic search, either up or down.
4. Buttons: Short press to adjust volume.

FM Radio process diagram:

Night Light

The sunlight simulation lamp is a multi-functional device that offers a variety of features to help enhance your daily routine. The lamp is designed to simulate natural sunlight, which can help regulate your circadian rhythm and promote a sense of well-being.
Night light process diagram:

Music

Music process diagram:

Specifications

Safety Instructions

To ensure your safety and prevent the risk of fire, electric shock, or injury, please read and carefully follow these instructions before using this product.

1. Household Use Only: This product is intended for household use only, including use in hotels. It is not suitable for commercial use.
2. Stable and Non-Slip Surface: Place the product on a stable, level, and non-slip surface to prevent it from falling or tipping over during use.
3. Avoid Wet Surroundings: Do not use this product in wet surroundings such as the bathroom, near a shower, or a swimming pool to avoid water damage and electric shock.
4. Water Damage Prevention: Avoid letting water run into or spill onto the product as it can damage the internal components.
5. Keep Adapter Dry: Ensure that the power adapter does not get wet while in use to avoid electric shock or damage to the product.
6. Use Original Accessories: Only use the original adapter and USB cable provided with this product to prevent damage or malfunctions.
7. Not a Substitute for Sleep: Do not use this product as a substitute for adequate sleep. It is designed to help you wake up more easily but should not be used to reduce your sleeping time.

Maintenance And Care

1. Cleaning: Clean the product with a soft and dry cloth.
2. Avoid Abrasive Cleaning Agents: Do not use abrasive cleaning agents, pads, or cleaning solvents such as alcohol or acetone, as they can damage the product’s surface.
3. Safe Storage: If the product will not be used for an extended period, unplug the power adapter from the socket and store the product in a safe and dry location where it will not be crushed, banged, or subject to damage.

Fcc Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>