DEKALA ACA-002 Smart Sunrise Pro Wake Up Light Instruction Manual

DEKALA ACA-002 Smart Sunrise Pro Wake Up Light

Product Overview

Get Started

1. Power Connection: Connect the Wake-up Light to the DC cable and adapter provided, then plug it into a power source to power it.
   

2. FM Radio Reception: Loosen the tie that secures the FM antenna and unroll the wire to improve FM radio signal reception.
   

3. Power On/Off: Important: This product does not have a power on/o button. It will turn on automatically once the power adapter is plugged into a socket. To disconnect power, please unplug the power adapter.

Features

12/24H Time Display| Adjustable LCD Time Display Brightness
---|---
Sunrise Simulation| Sunset Simulation
10 Ambient Lights| FM Radio 76.0-108.0 MHz
Dual Alarm Clocks| 7 kinds of Ringing Sound
8 kinds of Sleeping Sound| Snooze Function
USB Electronic Device Charging Port| DC Outlets Powered
Button Battery|

App Control

Download and Install Dekala APP
Search for Dekala from App Store/Google Play, or scan the QR code, then download and install it on your mobile device. Sign up or log in to the APP.

Note:

Only Supports 2.4GHz WiFi for the initial connection. If your network only has 5GHz, scan the QR code to follow the instructions to split your WiFi into dual bands of 2.4GHz and 5GHz.
Split WiFi into dual band 2.4GHz & 5GHz

Connect Sunrise Light to APP:

1. Turn on Bluetooth and location access on your mobile device so the app can detect the wake up light.
2. Make sure your mobile device is connected to 2.4GHz WiFi. Make sure the wake up light, mobile device and router are close enough.
3. Plug in the wake up light and wait for to start flashing.
4. Tap Add Device to connect the wake up light.
5. Choose WiFi (2.4GHz WiFi only) and enter password. Tap Done after device added successfully.
   

Note:

1. Reconnect: If the WiFi indicator remains constantly lit or is not visible, press and hold the top button for at least 5 seconds to reset it. Initially, the WiFi icon will disappear, then press and hold the button for at least 5 seconds again to make the WiFi icon start flashing.
2. Connected: The WiFi Indicator on the LED display will turn solid.
3. Once connected via 2.4GHz WiFi, you can use the Dekala app to control the device with cellular data or any other network without the need for the initial WiFi connection.

APP Home Page:

Note:

When finished “Edit Scenes” and “Alarm Settings”, click “Save” to save the settings.

Clock & Display Setting

Basic principle for setting up all functions is as follows:

1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the top button to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.

The required buttons are: Setting button and top button: 

1. Setting Button: Long press to enter settings.
2. **** Top Button: Rotate to select parameter values and press to confirm parameters.

Setting Steps:

the date of the week

Setting Time Display Brightness:

1. Operation instruction: Press setting button to switch display contrast.
2. There are four levels of time display brightness: Off, Night, Day, and Auto.
   Auto : The screen brightness is at Night level between 10:00 PM and 6:00 AM, and at the Day level during all other times.

*Please note that the time display brightness in night mode can only be clearly seen in a completely dark environment.

Time setting process diagram:

1. Long press to start setting.

2. Set time format.
   

3. Set the hour.
   

4. Set the minute.
   

5. Set the date of the week.
   

Note:

The wake-up light cannot enter time-setting mode when the time is not displayed.

Setting Sunrise Alarm Clock

Basic principle for setting up all functions is as follows:

1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the top button to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.

The required buttons are: Alarm button and top button:

1. Alarm Button: Long press to enter settings.
2. **** Top Button: Rotate to select parameter values and press to confirm parameters.

Setting Steps:

Step 1| Step 2| Step 3| Step 4| Step 5| Step 6| Step 7
---|---|---|---|---|---|---
Long press to start setting| Set the hour| Set the minute| Set repeat days| Set alarm sound| Set alarm volume| Set sunrise duration

Switching the alarm on/off:

1. Press alarm 1 or alarm 2 if you want to switch the alarm on or off.
2. The corresponding icon appears on the display when you switch on the alarm.
   It disappears when you switch off the alarm.
   

Sunrise alarm clock process diagram

1. Long press to start setting.

2. Set the hour.
   

3. Set the minute.

4. Set repeat days.

5. Set alarm sound.

6. Set alarm volume.

7. Set sunrise duration.

Note:

When setting repeat day:

Icon| | |
---|---|---|---
Repeat| Everyday| Monday-Friday| Saturday – Sunday

When setting alarm sound:

Icon| | |
---|---|---|---
Sound| No alarm sound| Alarm sounds| FM radio

When setting sunrise duration:

Icon| | |
---|---|---|---
Duration| No wake-up light| Light and sound go
off at the same time| Gradual light increases
5-120 mins prior to alarm

Set FM Radio as Alarm Sound

1. When setting alarm sound, select xxx.x MHz and the xxx.x MHz icon flashes, then press the top button **** to set FM radio.

2. Rotate the top button to select the channel for the radio alarm.

3. Press the top button to confirm your selection.

4. Proceed with the other steps to complete alarm clock setting.

5. Press to set radio.
   

6. Set FM radio.
   

Snooze

When the alarm sound is played at the set time, you can tap on the top button of the Wake-up Light to snooze for a while. The alarm sound and light stop. After 9 minutes, the alarm sound and light automatically play again. Do not hit the Wake-up Light with too much force, as this may cause damage.

Snooze process diagram

Note:

1. The alarm 1 or alarm 2 icon flashes on the display when the alarm is snoozed. Snooze up to 5 times.
2. If there is no action within 15 minutes of the alarm going off, it will automatically stop.

Ambient Lamp

This product offers 10 vibrant and rich ambient lighting effects suitable for various environments, such as sunrise, Aurora, rainbow, and breathe.

The required buttons are: Light button and buttons:

1. Light: Tap to turn on or off the ambient light, long press to cycle through lighting effects.
2. **** Buttons: Used to select light brightness.

Ambient lamp process diagram:

Tips:

In C03 mode, rotate the top button to adjust the breathing speed.
In C09 mode, rotate the top button to adjust the color of the light.

Setting The Sleep-aid

Basic principle for setting up all functions is as follows:

1. Long press the function key to enter the setting for that specific function.
2. Rotate the top button to select the desired option.
3. Press the top button to confirm and move on to the next parameter setting.
4. Repeat steps 2-3 to select and confirm all desired parameters.

The required buttons are: Sleep-aid button and top button:

1. **** Sleep-aid: Long press to enter settings and press to confirm parameters.
2. **** Top Button: Rotate to select parameter values and press to confirm parameters.

Setting Steps:

Switching the sleep-aid on/off:

1. Press sleep-aid button if you want to switch the sleep-aid on.
2. Press sleep-aid or Snooze button if you want to switch the sleep-aid off. The corresponding icon appears on the display when you switch on the sleep-aid. It disappears when you switch off the sleep-aid.
   

Sleep-aid process diagram:

1. Long press to start setting.

2. Set sleep-aid duration.

3. Choose sleep sound.

4. Set volume of sleep sound.

5. Set light of sleep-aid.

Note:

When setting sleep-aid duration:

Icon| |
---|---|---
Duration| Play 5-120 minutes| Play until you stop it

When choose sleep sound:

Icon| | |
---|---|---|---
Sound| No sleep sound| Sleep sound| FM radio

When setting light of sleep-aid:

Icon| |
---|---|---
Duration| No sleep-aid light| Different lighting effect

Set FM Radio As Sleep Sound

1. When setting sleep sound, select xxx.x MHz and the xxx.x MHz icon flashes, then press the top **** button to set FM radio.

2. Rotate the top button to select the channel.

3. Press the top button to confirm your selection.

4. Proceed with the other steps to complete sleep aid setting.

5. Press to set radio.
   

6. Set FM radio.
   

FM Radio

The FM Radio feature allows you to tune in to your favorite stations and enjoy high-quality sound. With a simple push of a button, you can search for the station you want, adjust the volume, and immerse yourself in your preferred music or talk show.

The required buttons are: FM Radio button, button and buttons:

1. Button: Press the radio button to turn on or off the FM radio. Hold the radio **** button down for 2 seconds, the clock will scan all the available stations.
2. Button: To tune to a specific frequency, rotate the top button left or right to adjust the frequency in increments of 0.1 MHz.
3. Buttons: To switch between saved stations, press and hold the button for 2 seconds, and the radio will automatically switch to the stations saved through automatic search, either up or down.
4. **** Buttons: Short press to adjust volume.

FM Radio process diagram:

1. Long press to search.

2. Automatically save stations.

3. Long press switch stations.
   

Night Light

The sunlight simulation lamp is a multi-functional device that offers a variety of features to help enhance your daily routine. The lamp is designed to simulate natural sunlight, which can help regulate your circadian rhythm and promote a sense of well-being.

Night light process diagram:

Music

Music process diagram:

Specifications

Model

|

ACA-002-PRO-S

---|---

Size

|

6.8 × 6.7 × 3.0 inches

Weight

|

11.3 ounces

Material

|

ABS、PC

FM radio frequency

|

76.0-108.0 MHz

Control mode

|

Button control/ APP control

Adapter

|

5V-2A/100-240V

Certification

|

Troubleshooting

1. Please turn on bluetooth and location access on your cell phone. Then put wake up light and cellphone as close as possible.
2. Please check the wake up light is powered on.

Fail to connect WiFi ( the is hidden.).|

1. Please check your phone connect to a 2.4GHz WiFi network during 、 setup, not 5GHz WiFi;
2. Make sure your phone and device under the same WiFi;
3. Make sure the WiFi name and password is correct;
4. If you input the wrong WiFi or wrong passwords, please long press the top button to reset WiFi and choose the right WiFi and passwords.

How to configure separate WiFi SSIDs for 2.4GHz and 5GHz bands?|

1. Ensure that the router supports both the 2.4GHz and 5GHz bands.
2. Go to the Wireless page of the router. (The entry address is usually provided on the label attached to the back of the router).
3. Go to the 2.4GHz setting page, and set the WiFi name (SSID) to XXX—2.4G, where xxx indicates the WiFi name. Save setting.
4. Go to the 5GHz setting page, and set the WiFi name (SSID) to XXX—5G, where xxx indicates the WiFi name. Save setting.

Bluetooth connection failed.|

1. Please confirm whether the mobile phone Bluetooth is enabled;
2. Please confirm whether the device has been connected to another Bluetooth device.

App loses control over the device.|

1. Please make sure that the device is powered on;
2. Check the strength of the WiFi signal (open a random web page as testing) and whether the device and your smartphone are connected under the same WiFi (2.4GHz only) ;
3. Re-open Dekala app and try again.

Changes in setting on app don’t sync with the device.|

1. Check the WiFi connection between the device and your smartphone and the strength of WiFi signal (open a random web page as testing) ;
2. Re-open Dekala app and try again.

Smartphone loses control over the device when under separated locations (different WiFi).| Check the strength of WiFi signal (open a random web page as testing) , and make sure the device and your smartphone are connected under the same WiFi (2.4GHz only) .

1. Re-open Dekala app and try again;
2. Try re-starting the router.

Other issues.| If issues still occur under the instructions above, please go to Dekala APP home page: click “Me”, “FAQ & Feedback” “Feedback” to submit your issue and feel free to contact us by E-mail at info@dekalastore.com, our troubleshooting team will get back to you ASAP.

Safety Instructions

To ensure your safety and prevent the risk of fire, electric shock, or injury, please read and carefully follow these instructions before using this product.

1. Household Use Only: This product is intended for household use only, including use in hotels. It is not suitable for commercial use.
2. Stable and Non-Slip Surface: Place the product on a stable, level, and non-slip surface to prevent it from falling or tipping over during use.
3. Avoid Wet Surroundings: Do not use this product in wet surroundings such as the bathroom, near a shower, or a swimming pool to avoid water damage and electric shock.
4. Water Damage Prevention: Avoid letting water run into or spill onto the product as it can damage the internal components.
5. Keep Adapter Dry: Ensure that the power adapter does not get wet while in use to avoid electric shock or damage to the product.
6. Use Original Accessories: Only use the original adapter and USB cable provided with this product to prevent damage or malfunctions.
7. Not a Substitute for Sleep: Do not use this product as a substitute for adequate sleep. It is designed to help you wake up more easily but should not be used to reduce your sleeping time.

Maintenance And Care

1. Cleaning: Clean the product with a soft and dry cloth.
2. Avoid Abrasive Cleaning Agents: Do not use abrasive cleaning agents, pads, or cleaning solvents such as alcohol or acetone, as they can damage the product’s surface.
3. Safe Storage: If the product will not be used for an extended period, unplug the power adapter from the socket and store the product in a safe and dry location where it will not be crushed, banged, or subject to damage.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Customer Support

If you need any assistance please feel free to contact us
Support@dekalastore.com

Download App

Instruction Videos

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>