QLINN Bird Feeder with Camera Wirless Outdoor User Guide
- June 17, 2024
- QLINN
Table of Contents
User Guide
Smart Bird Feeder with Camera
Product Included
Bird Feeder With Camera Structure
- Bird Feeder Housetop
- Glass Cover
- Bird Feeder Camera
- Place Bird Food
- Bracket
- Food Inlet
- Bird House
- Water Hole
- Bird Stand
Camera Details
- Ty Mode/Power/White Light
- HD Lens
- Light Sensor
- PIR
- IR Light
- Microphone
- Power Switch
- SD Card Slot
- Reset Switch
Follow Me Step by Step Install
Step 1. Take Out the Wooden Frame with the Camera 
Step 2. Adjust Camera Angel to Horizontal Line of Direction
Power On: Long press the power switch
for 3 seconds to power on.
(R) Reset :Long press the reset button for 3 seconds to recover factory mode.
Step 3. Prepare to Pair the Camera Network 
Connect the
camera network, advise placing the camera within 2 meters of the router,
Support : 2.4GHZ wifi only
Step 4. APP Download and Registration
-
Pls scan the QR code or search for “FOWL”in App Store or Google Play.https://www.cookycam.cn/download/FowlAppDown.htmhttps://drive.google.com/file/d/1Hd12ibIuIZqDmClEuDdiH_AhuDJayfk9/view?usp=share_link
-
Open theFOWL”APP and click*Quick Register’set user name and password.
-
Method one: via “Scan QR code Connection” add camera and
Scan QR code Connection
-
Connect the 2.4ghz wifi ( not support 5G).
-
Scan the QR code by the APP until the camera makes a beep.
-
Method one: via “Scan QR code Connection” add camera and.
10S: Setttings-Notifications- FOWL -Allow Notification/ ON
Android: Setttings-Notifications- FOWL -Show Notification/ ON
-
succeed and get the alerts
Method Two:AP Connection
-
Click”Add Device”, select “AP connection’.
-
Turn on the camera and restore it to the factory settings.
-
Click “Go to connect” to enter the Wi-Fi settings of your phone.
-
Find the signal beginning with @ OK –*-and connect it.
-
Return to the App to add the device successfully.
Click Play to view and operate the camera.
Configure WiFi
-
Enter camera parameters
-
Select WiFi settings
-
Select your home WiFi and enter the WiFi pasword correctly.
Device Share
Click “Settings” on the right corner, then select “Device Share’—-
‘QR Code Sharing”.
Other users can open the app and click the “+ in the upper right corner of the
nhome page to scan the QR code to add the device.
Install bird feeder
- Install the screws on the tree or wall corresponding to the holes in the support.
- Install the bracket connector into the bottom of the bird house
- Hanging the bracket to the 3 screws
- Using the nylon rope to tighten the bird feeder
Questions and Answers
Q: Support phone system for the APP?
A: Android ≥ 4.4 version, iOS ≥ 8
Q: Can use a solar panel to charge it?
A Yes, The bird feeder camera port is MICRO and Power is 3.7V5000mAh, So you can use the Solar panel to charge it. Not any compatibility issues. Suggest 3W/SW solar panels.
Q: Does the camera support the 5ghz Wi-Fi signal ?
A: NO, 2.4 GHz Wi-Fi only.
Q: If buy it for my family, can | share the app screen with my other family, so all can see it?
A Of course. You can share the app with 3 family members. When you connect the camera, you can go to the setting, and click the Device Share, The screen will appear the QR Code Sharing, you can add the family members this way.
Q: How long will be free for the cloud storage?
A: 3 DAYS FREE.
Q: How to open the alerts?
los: Setttings-Notifications- FOWL -Allow Notification/ ON Android: Setttings- Notifications- FOWL -Show Notification/ ON
Q: We using the AP mode to connect it, but cannot motion detection.
A: If you using the AP mode, you also must to do aging the router network link in the setting and follow the using guide.
Customer Service Email :
yy13138174398@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>