DEEPCOOL PL550D Direct Power Supply Instruction Manual
- June 17, 2024
- DEEPCOOL
Table of Contents
DEEPCOOL PL550D Direct Power Supply
Product Information
- Specifications:
- Model No.: PL550D, PL650D, PL750D, PL800D
- AC Input: 100-240Vac
- DC Output: +3.3V, +5V, +12V, -12V, +5VSB
- Max Output Current: Varies by model
- Max Combined Wattage: Varies by model
- Total Output: Varies by model
Product Usage Instructions
- Installation:
- Ensure that the power supply is compatible with your system’s requirements.
- Locate the mounting area in your PC case for the power supply.
- Place the power supply unit in the designated spot and secure it using the mounting screws provided.
- Connection of Cables:
- Connect the necessary power cables to your motherboard, CPU, GPU, and other components.
- Use the provided CPU (4+4) pins and PCI-E (6+2) pins as required.
- Make sure to connect the SATA and peripheral power cables to your storage drives and other peripherals.
- Powering On:
- Once all connections are secure, connect the power cord to the power supply unit.
- Plug the power cord into a power outlet and switch on the power supply using the power switch.
- Your system should now receive power from the power supply unit.
FAQs
- Q: What are the different models available in the PL-D Series?
- A: The PL-D Series includes models such as PL550D, PL650D, PL750D, and PL800D.
- Q: What is the warranty period for these power supply units?
- A: The warranty period for the PL-D Series power supply units is 5 years.
- Q: How can I determine the appropriate model for my system based on the specifications?
- A: Refer to the specifications sheet provided in the user manual to match the model with your system’s requirements based on AC input, DC output, and wattage.
List of parts
- PL550D / PL550D WH / PL650D / PL650D WH
- A x1 B x1 D x1 E x1 F x1 G x2 I x1 J x4 K x1
- PL750D / PL750D WH / PL800D / PL800D WH
- A XI B X1 C x2 E X1 F x1 H x2 I x1 J x4 K x1
- A. Power supply unit
- B. Main Power Connector (20+4)Pin×1
- C. CPU(4+4)Pin x 1
- D. CPU(4+4)Pin x 2
- E. PCI-E(6+2)Pin x 1
- F. PCI-E(6+2)Pin x 2
- G. SATA x 3 + 4Pin Peripheral x 1
- H. SATA x 4 + 4Pin Peripheral x 1
- I. 12V-2×6(16Pin) x 1
- J. Mounting screws
- K. AC power cord
Specification sheet
Installation
- Ensure that the AC power cord of the power supply is not connected.
- Follow the case’s manual on installation of a power supply, and install the unit with the provided mounting screws.
- The 24Pin motherboard cable has a detachable 4Pin connector, which allows support for both 24Pin and 20Pin power sockets on the motherboard.
- Connect the CPU(4+4)Pin cable to the motherboard.
- Connect the peripheral cable to the power supply socket of the hard disk and CD-ROM/DVD-ROM.
- Connect the SATA cable to the power socket of the SATA SSD or hard disk.
- Connect the PCI-E(6+2)Pin cable to the power socket of the PCI-E graphics card (if necessary).
- If your Graphic Card uses 12V-2×6, please prioritize using the 12V-2×6 (12+4pin) cable configured in our Power Supply to connect to your Graphical Card.
- Connect the AC power cord to the power supply and turn on the power by turning the switch to the ”I” position.
- For more information, please check our website at: www.deepcool.com.
CONTACT
- DeepCool USA Inc.
- 11650 Mission Park Drive Suite 108., Rancho Cucamonga, CA 91730
- Beijing Deepcool Industries Co., Ltd.
- Building 10, No. 9 Dijin Road, Haidian District, Beijing 100095, China
- © 2023 Beijing DeepCool Industries Co., Ltd. All rights reserved.
- “ ”and other commercial identities are legitimate registered trademarks and commercial
- identities of the trademark owner and its affiliates in China and other countries or regions.
- Pictures on this package are for reference only, please refer to the actual product.
- www.deepcool.com.
- NATIVE ATX3.0 DIRECT POWER SUPPLY
- PL550D
- PL650D
- PL750D
- PL800D
- PL550D WH
- PL650D WH
- PL750D WH
- PL800D WH
References
Read User Manual Online (PDF format)
Loading......