HONOMO ST120C Mini Photography Live Fill Light Instruction Manual
- June 17, 2024
- HONOMO
Table of Contents
HONOMO ST120C Mini Photography Live Fill Light Instruction Manual
Please read this manual carefully before use and keep it for future reference>>
Precautions
- This product does not have a waterproof function. Do not let the product contact liquid or moisture, otherwise it may lead to the risk of electric shock. In severe cases, it may lead to death;
- The built-in battery of this product is prohibited from investing in this product into fire or in liquid, and the product is prohibited from getting close to any source of fire or heating the product to prevent the built-in battery from due to excessive temperature and spontaneous combustion explosion, which may lead to fire hazards or loss of life and property
- Do not disassemble or modify this product without permission. If the product fails, please contact the dealer for repair. Damage caused by unauthorized disassembly or modification of this product is not covered by the warranty, and our company will not bear any responsibility arising from unauthorized disassembly or modification of this product;
- This product may generate heat during use. Do not use it near flammable and explosive materials;
- When the fill light is lit, do not look directly at the light source to avoid damaging the eyes;
- The product interface design cannot withstand the weight of the camera. Do not try to grasp the product and pick up the camera when using it, which may cause the camera to fall damage.
- Please store the product where children cannot contact;
Product features
120 bright light beads design, brightness 0~100% stepless adjustment, multiple lighting modes freely switched (up to 20 creative lighting effects), 120° wide angle lighting,>95 high color rendering.
Packing list
Fill light 1 Type-C charging cable 1 Use instructions 1 The following is a list of optional accessories, customers can buy separately according to their own needs Cold Boot Base 1 Quick Insert Portable Clip 1 Cold Boot Portable Clip 1 1/4 “Portable Clip * 1
Product parameters
Product model: ST120C
Operating Voltage: 3.7V
Power: 12W
Color rendering: >95
Beam angle: 120°
Main material: ABS
Color temperature: 2500K-9000K
Charging interface: Type-C
LED Qty: 120PCS high brightness
LED Battery type: built-in 3000mAh lithium battery
Product Size: W106 x D19 x H66mm
Product Weight: 117g
Component function name
- Type-C charging port
- electricity indicator light
- 1/4 “-20 snail hole (one of the long and short edges)
- Secure the buckle of the Clip (one of the long and short edges)
- color temperature adjustment knob
- Brightness adjustment knob
- Power switch
Instructions for use
-
Use it with camera facilities The selected cold boot base (optional) 1/4 “screws into 1/4” threaded holes of the light lamp (Figure 1),
Insert the other end of the camera’s top cold boots interface (Figure 2),
Rotate the fixing screw to lock the fill light on the camera, turn on the power and adjust it to the appropriate color value and brightness to match the environment. PRRD -
Supporting or live use with 3C products
A: Install the 1/4 “screw on the 1/4” portable clip (optional) and screw it into the 1/4 “screw hole of the fill light (Figure 3)
Open the portable clip and clip it onto objects such as the edge of the phone or computer display screen Above (Figure 4);
B: Insert the quick insert portable clip (optional) into the socket on the back of the fill light (Figure 5)
and open the clip. Clip the clip onto objects such as the edge of the phone or computer display screen (Figure 6);
C: On the basis of installing the cold shoe base (optional) (Figure 1) , attach the cold shoe portable clip (optional) to the cold shoe. The interface is firmly connected to the cold shoe base and locked (Figure 7).
Open the portable clip and clamp it onto the. On objects such as the edge of a mobile phone or computer display screen (Figure 8);
Note: After opening the clips of the three portable clips, they can be clamped onto any object with a width not exceeding 35mm. -
Operation description
A. Charging: Connect the Type-C charging cable provided with the machine,
plug the Type-C head into the charging port of the fill lamp, and plug the USB
head into the DC5V/1A adapter at the other end, then connect the adapter to
the daily lighting circuit,
B. Switch on/off: Turn the side power switch of the fill lamp to ON,
turn on the power, and the startup is completed: Conversely, turn the power
switch to OFF, the power is turned off, and the fill light is turned off;
C. Brightness adjustment: Turn the brightness adjustment knob to the “+”
direction to increase the brightness, and turn it to the “-” direction to
decrease the brightness;
D. Color temperature adjustment: Rotate the color temperature adjustment
knob towards the power switch direction, and the color temperature changes
from white to orange, and vice versa.
Note: When turning on the power switch and the fill light does not light
up, please check whether the fill light has run out of power. If it runs out
of power, please turn on the power in a timely manner to replenish the power.
Warranty and after-sales service
The products enjoys after-sales warranty service. If there is any quality problem within 15 days after purchasing, you can contact the dealer Free replacement. If the product has quality problems within one year after purchase, it can be repaired for free.
*Note: Product return and maintenance are not applicable to the following situations
- Due to misuse, accident, modification, improper physical or operating; environment, natural disasters, improper maintenance or storage, Failure or damage caused;
- Failure or damage caused by products, services or behaviors of the third party; 3. Discoloration, wear and consumption during the use of the product.
Customer Information| Name| | Email|
---|---|---|---|---
Address|
Phone number| Code| |
Product Information Of| Name| | Barcode/Model number/Batch number|
Model| |
Distributor information| Name|
Address|
Phone number| | Code|
Selling date| | Invoice number|
Remarks| |