Elikliv EDM4 LCD Digital Microscope User Manual

Elikliv EDM4 LCD Digital Microscope

Elikliv LCD Digital Microscope

Model :DM-04

User Manual

• In order to correctly use the LCD digital microscope. please read the instructions carefully.
• It’s very easily used and you will have a good time with this microscope.
• If you have any questions or concerns about the digital microscope, please contact us at the following e-mail: support@elikliv.com

All our Elikliv brand products can offer a one-year warranty and long tech support.

Notice:

1. Use 18650 size rechargeable batteries, the first time to install the battery and replace the battery. please use the charger to charge the activation device.
2. The digital microscope has a lens cover to protect it from dust. Please remember to remove the lens cover when using the microscope.
3. Due to version issues, it may be slightly changed due to upgrades, which does not affect your use.

Parts and functions

• 4.31-inch LCD Digital Screen
• Digital Microscope with Reset Hole
• LED Light Wheel
• OK Button
• Left Button
• Right Button
• Power Button with Indicator Light
• Menu
• Focus Wheel
• TF Card Slot
• USB Interface
• Battery Cover
• 8 LED Lights

• OK Button: In the photo mode. press this key to take photos and save files automatically. In video mode.short press this key to take a video and then press the key to stop and save files. When you enter a menu. you can confirm the selection by short-pressing this button.
• Left/Right Button: You can press this button to move your selection.
• Menu Button: It’s a menu and toggle button.Short press this button to enter and exit the menu.In the boot mode, long press this button for 2-3 seconds to switch modes, namely “video mode”,” photo mode”, and “file mode” in turn.
• Power Button: Turn off/on the power.
• Focus Wheel: While taking pictures or videos, rotate this roller to adjust the focus and focus on the subject. You could adjust the focus to reach 500X/1 000X magnification. Please notice that the shorter the object distance, the larger the magnification.
• LED Light Wheel: Through this wheel, you can adjust the brightness of 8 LED lights.
• Reset Hole: If this microscope gets stuck in, you could insert a thin object into the hole, and press the button to turn off the device.
• TF Card Slot: The most important thing is that you must insert a TF card in the slot before you use it, and you can store files.Maximum support 32G.
• USB Interface: CD Entering the PC camera mode or hard disk memory mode via a USB cable connecting your Windows computers. (Mac computers don’t support) ® When the power of the device is low, the charger is connected to charge the device. It is not recommended to use the device during the charging process {which will reduce the service life of the device’s battery).
• Indicator Light: The indicator light includes the charging indicator(red) and the working indicator (blue). The charging indicator is located above the working indicator and is displayed through the indicator light hole(number 7). After the device is connected to the USB, the charge indicator lights up. After long press the power button for 2-3 seconds to start normally, the working indicator (blue) is always on.

Operation Methods

• Turn on the device by long pressing the power button.
• Long press the Menu Button to switch video/photo/file mode.

Mode Interface

• A. Video Mode
  The microscope opening is in video mode. Short press the OK button to start and end the record.

• B. Photo Mode
  Long press the MENU Button to switch into the Photo Mode. Press the OK Button to take a photo.

• C. File Mode
  Long press the MENU Button to switch into the File Mode. Press the Left/Right button to look through the file you recorded.

Menu Interface

• Short pressing the MENU Button to enter and exit the menu interface. You could short-press the MENU Button to switch the special menu setting to the common menu setting.
• OK Button to confirm, Left/Right Button to move the selection.

Common Menu Setting

• Format: Format the memory.
• Language: Select different languages for display.
• Line-assist: display and hide the “cross” line in the photo and video interface.
• Auto Off: Select the appropriate time to automatically shut down the device when no one is operating.
• Sys. Reset: Restore the factory settings.
• Light freq: Mains frequency setting, 50Hz/60Hz optional.
• Date Input: Set date/time parameters.
• USB: Choose the PC Cam/Disk/Charging Mode.
• Version: View the current software version.

Special Menu Setting

A.Video Menu Setting

In the video mode, short press the MENU Button to enter the video menu setting.

• Size: The choice of video resolution is 720P and VGA formats.
• Time Stam: When this option is enabled, the camera and video have time stamps.
• Exposure Compensation: Exposure adjustment.

B.Photo Menu Setting

In the photo mode.short press the MENU Button to enter the photo menu setting.

• Quality: The choice of photo resolution is 3M,2M, 1.3M, and VGA formats.

C.File Menu Setting

In the file mode, short press the MENU Button to enter the file menu setting.

• Delete: You could choose to delete the selected content or select all to delete.
• Lock/Unlock: lock or unlock the files.

USB Function

Device mode has PC camera mode and hard disk storage mode available for the user to choose from.

• Disk Drive Mode
  • First. set the USB function to “Disk” mode in the microscope menu and press OK to end.
  • When connected to a computer, the device cannot perform operations, you can enter the device memory at the computer. Only the switch button LED fill light knob is valid. other buttons cannot be used.
• PC Camera Mode
  • If you want to watch it from the computer directly. you could choose PC Camera Mode.
  • CD First, set the USB function to “PC camera” mode in the microscope menu and press OK to end. Then connect the microscope to the computer via a USB cable. Then the microscope automatically enters PC Camera mode when you connect the computer.
  • And only open the “amcap” software on your Windows computer. If your computer doesn’t have “Amcap” software, you could copy the software “Amcap” file from CD, or download it from Google. Then turn on “Amcap” software on the Windows Computers, as shown ,  then choose the second option and check the device name GENERAL UVC , finally selects the Preview in the third option to display the image. In PC mode, only the button of the machine and the potentiometer of the light supplement lamp are valid. Other keys cannot be used.

Technical Parameter

Customer Support

Elikliv is dedicated to offering the best service.

To reach Elikliv customer support.

• Please email: support@elikliv.com

Frequently Asked Questions

How do I correctly use the Elikliv EDM4 LCD Digital Microscope?

To correctly use the Elikliv EDM4 microscope, please ensure you read the instruction manual carefully. It's designed for easy use, and you'll have a good time exploring with it.

What is the warranty period for Elikliv brand products, including the EDM4 model?

All Elikliv brand products, including the EDM4 model, come with a one-year warranty and long-term technical support.

What should I keep in mind regarding the use of rechargeable batteries for the Elikliv EDM4 microscope?

When using rechargeable batteries (18650 size), ensure to install them correctly. Use the charger to activate and recharge the batteries as needed.

Is there any protective cover for the lens of the Elikliv EDM4 microscope?

Yes, the Elikliv EDM4 microscope comes with a lens cover to protect it from dust. Remember to remove the lens cover before using the microscope.

Are there any potential changes to the Elikliv EDM4 microscope due to upgrades?

Due to version upgrades, there may be slight changes to the Elikliv EDM4 microscope, but these changes do not affect its functionality.

Could you describe the various parts and their functions of the Elikliv EDM4 microscope?

Certainly! The various parts and their functions of the Elikliv EDM4 microscope are described in detail in the user manual provided with the product.

How do I operate the OK Button on the Elikliv EDM4 microscope?

In photo mode, press the OK button to take photos and save files automatically. In video mode, short press this button to start and end video recording.

What is the purpose of the Left/Right Button on the Elikliv EDM4 microscope?

The Left/Right Button allows you to move your selection within the menu interface of the Elikliv EDM4 microscope.

Can you explain the functionality of the Menu Button on the Elikliv EDM4 microscope?

The Menu Button serves as a menu and toggle button. Short press to enter and exit the menu. In boot mode, long press to switch between video, photo, and file modes.

How do I adjust the focus of the Elikliv EDM4 microscope?

To adjust the focus of the Elikliv EDM4 microscope, use the Focus Wheel. Rotate the wheel while taking pictures or videos to achieve the desired focus. The shorter the object distance, the larger the magnification.

What is the purpose of the LED Light Wheel on the Elikliv EDM4 microscope?

The LED Light Wheel allows you to adjust the brightness of the eight LED lights on the microscope. This feature helps optimize lighting conditions for clear and detailed observations.

How do I reset the Elikliv EDM4 microscope if it gets stuck?

If the Elikliv EDM4 microscope gets stuck, you can use the Reset Hole. Insert a thin object into the hole and press the button to reset the device.

Video- Microscope Usage Instructions

Download The PDF link:Elikliv EDM4 LCD Digital Microscope User Manual

Reference:Elikliv EDM4 LCD Digital Microscope User Manual- usermanual.wiki

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>