DRAGONN DN-CH-03RR Black Rocking Kneeling Chair with Wheels Instruction Manual
- June 17, 2024
- DRAGONN
Table of Contents
Black Rocking Kneeling Chair with Wheels
Instruction Manual
DN-CH-03RR Black Rocking Kneeling Chair with Wheels
SKU: DN-CH-03RR
Scan the QR code with your mobile device or follow the link for helpful
videos and specifications related to this product.
https://vivo-us.com/collections/chairs/products/dn-ch-03rr
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@idragonn.com
---|---
| www.idragonn.com
Chat live with an agent!
| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Use this product on a stable,
level surface. Do not use this product for any purpose that is not explicitly
specified in this manual. Do not exceed weight capacity. Do not stand on this
product. Do not place fingers under rockers. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Insert Locking Casters (F) and Casters (E) into Feet (B).
STEP 2
Assemble Feet (B) to Chair Frame (A) using M8x50mm Screws (S-B) and M8 Washers
(S-C).
Tighten using 5mm Allen Wrench (T-A).
STEP 3
Secure Seat Pad (C) to Chair Frame (A) using M6x20mm Screws (S-A). Tighten
using 5mm Allen Wrench (T-A). Adjust the seat position using M6 Wrench (T-B).
Install Anti-Collision Pads (G) to Chair Frame (A).
STEP 4
Assemble Knee Pad (D) to Chair Frame (A) using M6x20mm Screws (S-A) and 5mm
Allen Wrench (T-A).
STEP 5
Loosen the knob on the side of Chair Frame (A) and remove it to enable the
rocking feature. Reattach the knob to lock chair and disable rocking feature.
USE & CARE GUIDE
Locking Chair in Place
To lock chair in place, simply press the levers on Locking Casters
(F).
Tension Adjustment
Adjustment knobs are provided in the middle of the chair to individually
adjust the resistance for forward and backward movement. The knob in the
front, labeled “Back”, adjusts the backward resistance, and the knob in the
back, labeled “Front”, adjusts the forward resistance.
Seat Tension Adjustment
Adjust the knob in the front to the left to increase resistance and right to
decrease resistance. Lean on the Knee Pad to make adjusting the knob easier.
Knee Tension Adjustment
Adjust the knob in the back to the left to decrease resistance and right to
increase resistance. Lean on the Seat Pad to make adjusting the knob easier.
Cleaning
Cushions:
Use warm water with a small amount of laundry detergent and a soft cloth to
wipe clean.
Dry using a cotton or microfiber cloth.
Frame:
Gently wipe down with a lightly dampened cloth or paper towel.
Lubrication
If your chair becomes noisy or doesn’t rock smoothly, add a small amount of
oil or white lithium spray grease to the locations indicated in the images
below. 
After fully rocking back and forth a few times to work the oil or grease into the joints, wipe away any excess with a damp cloth or paper towel.
Love your new Dragonn setup and want to share?
Tag us in your photo! @dragonnbrands
LAST UPDATED: 04/11/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CS T, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
help@idragonn.com
www.idragonn.com
Chat live with an agent!
309-278-5303
FOR MORE DRAGONN PRODUCTS,
CHECK OUT OUR WEBSITE AT:
www.idragonn.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>