TRIO 622910532 LED Recessed Ceiling Light Instruction Manual

: June 17, 2024
: Trio

Table of Contents

TRIO 622910532 LED Recessed Ceiling Light
Product Information
Product Usage Instructions
SAFETY NOTES
MAINTENANCE
USING FOR THE FIRST TIME
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRIO 622910532 LED Recessed Ceiling Light

TRIO-622910532-LED-Recessed-Ceiling-Light-product

Product Information

Specifications

Product Name : Lumiere
Safety Class : III
Dimmable: No
Power Source : Mains Electricity
Connection Terminals : L = Phase, N = Neutral lead, E = Earthing conductor

Product Usage Instructions

Safety Notes
- Only clean the Lumiere when it is switched off and cooled. Use a soft moistened cloth with mild detergent for cleaning. Avoid moisture around connections or live parts.
Maintenance
- Maintenance is limited to the surface. Allow the luminaire to dry completely before cleaning. Ensure all glassware is in perfect condition before operation.
Using it for the First Time
- Ensure floor lamps and table lamps are secure. Mount wall luminaires out of reach of children. Do not operate if visibly damaged. Electrical connections by specialist staff only.
Installation
- Follow installation instructions per national rules. Do not mount on moist or conductive substrates. Ensure the mains lead is de-energized before installation work.

FAQ

Can the lumiere be dimmed?
- No, this Lumiere is not dimmable.
What should I do if the luminaire is visibly damaged?
- Do not operate the luminaire if it is visibly damaged. Contact a specialist technician for inspection and repair.
Can the bulb be replaced when the luminaire is switched on?
- No, do not exchange the bulb when the device is switched on as the luminaire will be hot in the area around the bulb.

SAFETY NOTES

The product may not be disposed of with household waste. Always take the product to a collection point for the recycling of electrical and electronic equipment at the end of its service life. Please enquire about this point at your responsible municipal administration. The same also applies to any batteries or rechargeable batteries that may be included in the scope of delivery. Any removable batteries or rechargeable batteries must be removed before being taken to a collection point. Dealers are obliged to take back the old appliance free of charge. Old appliances often contain sensitive personal data. For your own sake, please note that each end user is responsible for deleting the data on the old appliances to be disposed of.

MAINTENANCE

Only clean the Lumiere when it is switched off and cooled. The maintenance of luminaires is limited to the surface. In this case, no moisture should enter the area around the connections or live parts. For cleaning, use a soft moistened cloth with a mild detergent. Allow the luminaire to dry completely before cleaning.

USING FOR THE FIRST TIME

In general, through mechanical or thermal loads, lumieres can cause injury. In order to minimise the risk of injury, ensure that floor lamps and table lamps are secure and mount wall luminaires out of the reach of children.Do not operate the luminaire if the luminaire itself (or its power cable) has visible damage. Electrical connections should only be carried out by specialist staff. The installation instructions should be followed in accordance with the national rules concerning the fitting of appliances.
In order to avoid hazards, a damaged external flexible cable should only be exchanged by a specialist technician.

The requirements of the installation site concerning the IP safety class of the Lumiere must be followed.

In general, do not mount luminaires on a moist or conductive substrate.

Warning! Before starting the installation work, ensure that the main lead is not carrying current (de-energized).

Designation of the connection terminals
L = Phase, N = Neutral lead = Earthing conductor.

When installing, ensure that the leads are not damaged
If silicone piping is enclosed with the Lumiere, the piping must be put over the mains lead in order to protect against heat.
All safety and design glassware fitted on the Lumiere must be applied in perfect condition. Otherwise, the Lumiere sould not be operated.

Warning! The luminaire will be hot in the area around the bulb. Do not exchange the bulb when the device is switched on.

The stated maximum wattage of each individual lighting unit should not be exceeded. When replacing the bulb, please observe the stated maximum values on the lighting units or in the instruction manual.
Before using the Lumiere for the first time, make sure the bulb sits securely in the holder.
The quartz glass of the halogen bulb should not be touched with bare hands (this does not apply to cold light reflector bulbs with a front glass). If this happens though inadvertently, the quartz glass should be wiped with alcohol before switching the bulb on.

TRIO-622910532-LED-Recessed-Ceiling-Light-fig2