Phrozen Technology DC 12V Sonic Resin 3D Printer Manufacturer User Manual
- June 17, 2024
- Phrozen Technology
Table of Contents
Phrozen Technology DC 12V Sonic Resin 3D Printer Manufacturer
Product Specifications
- Power Requirement: DC 12V; 3A
Product Usage Instructions
Step-by-Step Instructions
- Power Light: After the power is plugged in, the Power Light will light up automatically.
- Power Button: To turn off the power button, please long press for 2 seconds.
- Machine Status Indicator Light:
- Green Light: The machine is working properly.
- Blue Light: Ultrasonic knife is in use.
- Shaft: Rotate the shaft to adjust the angle of the Ultrasonic Knife.
- Machine Status: When the tool is in use, the blue indicator light will light up.
- Ultrasonic Switch: When in use, this button must be held down. If pressed for more than 2 min, the tool will stop working automatically.
- Ultrasonic Blade: Please use it carefully to avoid cutting and/or hurting yourself.
Key Notes Before You Start
- Please DO NOT touch the product with wet hands.
- Please wear cut-resistant gloves when handling the product.
- DO NOT expose the machine to liquids of any kind.
- If the device is exposed to water, discontinue use immediately.
- Please do not use this product to cut oil paper and/or any other flammable objects.
- DO NOT point the Ultrasonic Knife at others. Keep away from children.
- Please DO NOT use this product to cut metal or glass.
- DO NOT touch the blade immediately before or after use as high temperatures can cause burns.
- Danger – High Voltage! Non-professional personnel should avoid disassembling the product on their own to prevent injury from accidental touch.
- Cleaning Instructions: Please use sanitizing alcohol to clean the exterior of the device. Do not use any oily or corrosive liquids to clean the device.
FAQ
-
Q: What should I do if the Ultrasonic Cutter stops working suddenly?
A: If the cutter stops working suddenly, check if the Ultrasonic Switch has been held down for more than 2 minutes. Release and press again to resume operation. If the issue persists, contact customer support. -
Q: Can I use the Ultrasonic Cutter to cut metal or glass?
A: No, please do not use the Ultrasonic Cutter to cut metal or glass as it is not designed for such materials. Doing so may damage the tool and pose a safety risk.
Product Specifications
Power Requirement DC 12V; 3A.
Step-by-Step Instructions
Operating Manual
Key Notes Before You Start
- Please DO NOT touch the product with wet hands.
- Please wear cut-resistant gloves when handling the product.
- DO NOT expose the machine to liquids of any kind.
- If The device is exposed to water, discontinue use immediately.
- Please do not use this product to cut oil paper and/or any other flammable objects.
- DO NOT point the Ultrasonic Knife at others.
- Keep away from children.
- Please DO NOT use this product to cut metal or glass.
- DO NOT touch the blade immediately before or after use as high temperatures can cause burns.
- Danger – High Voltage! Non-professional personnel should avoid disassembling the product on their own to prevent injury from accidental touch.
Maintenance: Please use sanitizing alcohol to clean the exterior of the device. Do not use any oily or corrosive liquids to clean the device.