Happy Polly 52.8oz-1.5L Ghost Drinking Fountain Instructions
- June 17, 2024
- Happy Polly
Table of Contents
**Happy Polly 52.8oz-1.5L Ghost Drinking Fountain Instructions
**
INSTALLATION INSTRUCTION
READ BEFORE YOU START
Please identify and sort all components shown below.For any issues during installation, please ask for assistance at service@happyandpolly.com or check our YouTube Channel https://[www.youtube.com/channel/UCbPD98rZ- jOYrTCQA_0eNLg.](https://www.youtube.com/channel/UCbPD98rZ- jOYrTCQA_0eNLg.www.youtube.com/channel/UCbPD98rZ-jOYrTCQA_0eNLg.)
SAFETY GUIDELINES TO PREVENT INJURIES
- When using electrical appliances, basic safety precautions must always be followed to avoid the risk of fire, electric shock, and/or injury to persons.
- To avoid the risk of injury, close supervision is necessary when any appliance is used by or near children.
- To protect against electric shock, do not place the electrical power cord or plug in water or other liquids.
- Indoor household use only. Do not use outdoors or run dry.
- Unplug the fountain, then disconnect the in-line plug.
- To avoid the risk of electric shock, do not place or store an appliance where it can fall or be pulled into a bathtub or sink.
- Always unplug an appliance when it is not in use, before putting on or taking off parts, and before cleaning.
- Do not use an appliance for anything other than its intended use.
- Do not allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard plastic protector) at any hardware store.
- Do not attempt repairs on the pump.
- To avoid the possibility of the plug or electrical outlet getting wet, the electrical outlet should always be above the level of the fountain.
- If an extension cord is necessary, an extension cord with a proper rating should be used.
IMPORTANT
- Please identify and sort all components shown below.
- Only rinse the filter with water. Never wash the filter with soapy water as the soap residue will seep into the filter permanently.
- Use replacement filters authorized by Happy & Polly only. Using unauthorized filters may void the warranty
A: Detachable Pump × 1
B: Carbon Filter × 1
C: Filter Box × 1
D: Fountain With Detachable Lid × 1
ASSEMBLY INSTRUCTIONS
Control water flow with +/- button. “+” for max flow, “-” for min flow.
-
- Detach the pump.
-
Insert the carbon filter.
-
Recover the pump.
-
Assemble the pump and filter box. The long side of the filter is connected to the sucker.
-
Make the USB cable through the fountain. Plug the cable into the regulator.
-
Make sure the fountain is sealed by the rubber plug tightly.
-
Put them in the middle of the fountain
-
Adjust the cable.
CARE INSTRUCTION:
When using for the first time, please rinse the filter box for 2 minutes to flush out impurities caused by collision. Clean the Water Fountain every 7 days. To achieve the ideal filtering effect, it is recommended to replace the filter box once a month.
Happy & Polly www.happyandpoly.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>