DLS PERFORMANCE PA6 6.5 2 Way Coaxial Speaker User Manual
- June 17, 2024
- DLS PERFORMANCE
Table of Contents
DLS PERFORMANCE PA6 6.5 2 Way Coaxial Speaker
Welcome to DLS!
Thank you for buying a □LS Performance PA6. For us, it’s all about the sound
experience. We care deeply about sound and construction quality. For your
experience to be as optimal as possible, you must read this manual, preferably
before you start your installation. Keep the manual in a safe and accessible
place for future reference. Your speakers must be installed correctly to work
as intended. Make sure you have all the necessary tools nearby before starting
and that you are completely confident in how to process. If you feel the
slightest uncertainty; feel free to take the help of an experienced installer
or a car audio dealer.
Warranty
This coaxial speaker is covered by warranty, depending on the conditions in the country where it is sold. If the speaker is returned for service, please include the original dated receipt with the product.
General
Some sound systems may vary in size of the door speaker. Make sure that your
vehicle has the same size as this speaker before you start the assembly
DECLARATION OF CONFORMITY
DLS Performance speakers for vehicles are manufactured per the EU directive
EEC 95/54 (72/245/ EEC) and are marked with the approval number. They are also
marked by the WEEE-directive 2012/19/EC. The products are also produced by the
EU RoHS directive 2015/863/EU.
DLS speakers are engineered by DLS Sweden, a part of: Winn Scandinavia AB
Elementvagen 15 – SE-702 27 Orebro – Sweden Tel: +46 19 20 67 65 – E-mail:
info@dls.se www.dls.se
Designed & Sound tuned in Sweden.
Included parts
Included products:
- 2pcs Coaxial speakers
Included in box:
- 2pcs Speaker cables 100cm Bpcs V-type clips
- Bpcs Screws
- 2pcs Grills
- 1pcs Manual
Pre-installation
Disconnect Battery Before you start the process of replacing speakers, disconnect and secure the negative terminal from your battery/power source. This will prevent the risk of damaging yourself or the products. Place the disconnected terminal in a secure and isolated location away from any possible connection belonging to the battery/power source system.
Installation
Mount the speakers in the door or in the rear shelf of your car. They may fit
in the factory pre-made mounting holes, if not you might have to modify the
fitting. If you want to improve the sound reinforcement you can use a baffle
of MDF-board or similar. An installation was high up on the door side is to be
preferred. For door placements, there are normally speaker rings that have to
be used to make the speaker fit to the door panel.
NOTE! It is important to fasten the speakers properly to avoid bad sound
or rattling.
Door insulation
DLS recommends using insulation/sound deadening in the car doors. It lowers
the noise from the road/tires and prevents rattles and other noises from
plastic details in the doors.
If you need help deciding what type of door insulation you should use, ask
your DLS distributor for info and guidance.
Running-in time
- Allow the speakers to play for at least 15-20 hours to perform at its possibly best. This run-in can be made with tone sweep or with just music.
- Start at a moderate volume and increase the volume step by step during the running-in period. After the 15-20 hour run in session, the performance and characteristics will be in the correct condition.
DLS support
For technical assistance, ask your car audio dealer where the product was sold or the distributor in your country. You can always contact the DLS Helpdesk in Sweden at e-mail: info@dls.se. Information can also be found on our WEB site www.dls.se. We follow a policy of continuous advancement in development. For this reason, all or part of the specifications and designs may be changed without prior notice.
Wiring diagram
Specifications
Dimensions Product markings
- The crossed-out wheelie bin symbol means that the product, literature, and packaging included must be taken to a separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
- This product has been granted the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
- DLS products comply with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
- DLS is a global partner of the European Mobile Media Association, an organization that focuses on promoting the custom made mobile media installations to consumers.
We follow a policy of continuous advancement in development. For this reason all or part of specifications & designs may be changed without prior notice. We reserve for possible typos, factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>