Tenpoform W83-US Wireless Charger User Manual

Tenpoform W83-US Wireless Charger

Unique Appearance Design-W83

Operation Instruction

1. W83 can simultaneously charge the iPhone, Apple Watch, and wireless earbuds case that support wireless charging.
2. Please connect W83 to the 5V/3A and 9V/3A adapter by Type-C fast charging cable. Then, please connect the adapter to the power source. ( Package including adapter and Type-C cable.)
3. Please put your iPhone in the Magnetic wireless charging area to charge.
4. Please put your Apple watch in the watch charging area to charge.
5. Please put your wireless earbuds case in the case of the earbuds charging area to charge. (Note: If charging in the right way, the charging sensor light of the wireless earbuds charging case will keep a warm yellow light.)

LED Crystal Night Lamp

Mode Status

• Power On: Warm yellow light to white light to warm yellow light again
• Standby: Warm yellow lights If you change the light colour, It will be your set colour in standby status.)
• iPhone Charging: Keep the previous light mode
• Smart Watch Charging: Keep the previous light mode
• Charge Full: Keep the previous light mode
• Foreign Body Detection: warm yellow light flash

Charging Sensor Light of Wireless Earbuds Charging Case

How to Control LED Crystal Night Lamp

Long Press to Adjust Light Brightness
The initial light is the brightest yellow light when powered on.
Long press touch area, the yellow light will gradually dark. Long press again, the dark yellow light will gradually brighten yellow light.
Note:

1. If you short press it to white light already, you also can adjust the brightness of white light by long press.
2. The brightness has a memory function, so it will show the previous brightness while switching the light, if not powered off.

Detachable Apple Watch Charger

Way 1
Connect with W83 to charge your Apple Watch
Way 2
Connect with the type-c power source to charge your Apple Watch

Product Parameters

• Product name: 3 in 1 Wireless Charger with crystal night lamp
• Product size: 104mm 79.5mm118mm
• Conversion efficiency: Slow charging270% fast charging275%
• Operation frequency: 110-205KHz
• Material: ABS+PC+Acrylic
• Input: DCSV/3A 9V/BA
• Output(iPhone): 5W/7.5W/ 10W /15W(Max)
• Output (Earbuds charging case): 5W(Max)
• Output(apple watch): 5W(Max)
• Valid distance for wireless: charging iPhone) ≤5mm

Warm Tips

1. Before charging, please make sure your iPhone, earbuds case and Apple watch support wireless charging.
2. If you use a 5V/2A output adapter, the wireless charger supports a 5W load; if you use a QC3.0 standard adapter, the wireless charger supports a 15W load. We recommend you use PD fast charging or QC3.0 standard adapter.
3. If you want to charge an iPhone, earbuds case and Apple watch simultaneously, for safety and efficiency, please use a 9V/2A or higher output adapter and fast charging cable.
4. For example, you should use a 9V/3A adapter and fast charging cable, if the charging part of your iPhone needs to reach 15w.

Otherwise, W83 may not charge three devices simultaneously, if using a 5V/2A or lower adapter.

Warning!

1. DO NOT place W83 near fire sources or corrosive environments!
2. DO NOT place metal debris or magnetic cards on the charging board, as it may cause the charger to heat up!
3. The foreign body should be removed soon while alerting! (The bottom warm yellow light will flash while alerting!)

Packing List

• Wireless charger x1
• QC3.0 Adapter x1
• USB C Cable x1
• User Manual x1

If you have any questions about the item or extend to a lifetime warranty, please contact us by email:[email protected].

Thanks for choosing the Tenpoform item!
If you have any questions about the item or extend to a lifetime warranty, please contact us at [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>