CASAMBI CW03-A-B Touch Panel Instruction Manual
- June 17, 2024
- CASAMBI
Table of Contents
CASAMBI CW03-A-B Touch Panel
Quick installation guide
- Open the wall panel with a screw driver.
- Battery version: Pull out battery insulation tape.
- AC version: Connect AC power and install bottom part to socket with screw, then clip panel part to bottom part.
- Battery version: Install the back cover to wall with screw or adhesive, then clip panel part to the back cover.
Introduction
CW03 is a Casambi enabled touch sensing wall panel remote controller. It can be used as full function remote controller in Casambi system. There are two power supply options with AC power or cell battery. The AC version can fit traditional wall installation with AC power and the battery version can be installed at any preferred place.
CW03-A installation
-
Open the touch panel
The wall panel needs to be opened before installation. Please use a slot type screw driver to twist in the bottom side slot and open the panel. Please refer to picture 1. -
Connect the AC power
Push the top of connector on the bottom part back and insert the Land N AC power cables. The maximum cable gauge is 1.5mm’ or AWG16.
CAUTION! Cut off the AC power before installation to avoid electric shock! -
Install the panel
Install the bottom part to wall socket with screws. After the bottom part is installed, clip the front panel part to the bottom part to finish the installation. Please refer to picture 3.
CW03-B installation
-
Open the touch panel
The wall panel needs to be opened before installation. Please use a slot type screw driver to twist in the bottom side slot and open the panel. Please refer to picture 1. -
Prepare the battery
For new wall panel, please pull out the insulation tape under the battery. To change
the battery please slide the battery out from the battery socket and insert a new one. The battery type is CR2032. Please refer to picture 2. -
Install the panel
Install the back cover to preferred place by screw or double side adhesive tape. then clip the front panel part to the back cover and finish the installation. Please refer to picture 4.
Function
Operation
Activate pairing
The wall panel needs to be paired to Casambi project to work. For pairing,
user needs to activate pairing function by pressing key ·3· and key ·4·
simultaneously and briefly. (The “I”+ ·o· key operation has same function)
After this operation, the wall panel can be discovered on Casambi app and can
be added to Casambi projects.
Regular operation
All functions of the panel need to be defined on the Casambi app before
using, please finish the Casambi setting before using.
Please refer to the key description diagram on the left page. User can turn
ON/OFF light, set brightness or color temperature, and make group or scene
setting on the panel. The brightness and color temperature adjustment supports
both single touch and hold pressing.
Easy pat Turn-ON
Besides touching the turn on key to turn on lights, User can turn on lights
by patting the panel with palm.
This operation makes the turn ON operation more convenient especially at dark
environment.
Specification
- AC version working voltage AC 100-240V
- Battery version working voltage DC 3V, CR2032 battery
- Wireless protocol Casambi protocol
- Frequency band 2.4GHz ISM band
- Wireless power < 8dBm
- Working temperature – 10-40 °C