HUAWEI T0017 Free Clip In Ear Bluetooth Headset User Guide

: June 17, 2024
: Huawei

Table of Contents

T0017 Free Clip In Ear Bluetooth Headset
Downloading and installing the app
Pairing and connecting
Putting on the earbuds
Shortcut controls
Charging the earbuds
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

T0017 Free Clip In Ear Bluetooth Headset
User Guide

T0017 Free Clip In Ear Bluetooth Headset

HUAWEI T0017 Free Clip In Ear Bluetooth Headset

Quick Start Guide

Downloading and installing the app

Scan the QR code to download and install the HUAWEI AI Life app, where you can try out more features and customize the settings for your earbuds.

https://smarthome.hicloud.com/d/?p=ZAAI

Pairing and connecting

Method 1: Proximity pairing

Enable Bluetooth on your phone/tablet.
When you open the charging case for the ﬁrst time, the earbuds will automatically enter Pairing mode. Touch CONNECT in the pop-up window that appears to connect with the earbuds.

Proximity pairing is supported on phones/tablets running EMUI 10.0/Harmonious 2 or later.

Method 2: Bluetooth connection

Open the charging case and hold down on the Function button for 2 seconds until the indicator ﬂashes white. The earbuds will then enter Pairing mode.
Enable Bluetooth on your phone/tablet to be paired with the earbuds, then search for the earbuds and complete the pairing.

Restoring the earbuds to their factory settings
Open the charging case and leave the earbuds inside. Hold down on the Function button for 10 seconds until the indicator ﬂashes red. The earbuds will then be restored to their factory settings before re-entering Pairing mode.

Putting on the earbuds

This product uses an open acoustic design, which means it does not need to be inserted into the ear canal. The left and right earbuds are interchangeable, and will be automatically recognized as soon as they are worn.
The accuracy of automatic recognition varies depending on certain factors, like head movement and body posture. Dip your head slightly after putting on the earbuds to ensure optimally accurate recognition. Actual experience shall prevail. HUAWEI T0017 Free Clip In Ear Bluetooth Headset -
earbuds

Open the elastic connector to clip each earbud on. The ball should go in front, and the bean-shaped part should rest against the back of your ear.
Adjust until you’re comfortable.

Shortcut controls

Tap anywhere in the blue area to control the earbuds.

| |
---|---|---
Double-tap| Answer/End a call| Play/Pause audio
Triple-tap| /| Next track

You can also customize the double-tap and triple-tap gestures in the HUAWEI AI Life app.

Charging the earbuds

Place the earbuds in the charging case to initiate automatic charging.

Charging the case
Method 1: Wired charging
Connect the case to a power source via a USB-C cable to begin charging it.

Method 2: Wireless charging
Place the charging case on a compatible wireless charger with the indicator facing upwards and aligned with the center of the wireless charger.

Safety Information
Before using and operating this device, read the following precautions to ensure an optimal device performance and avoid dangerous use or unauthorized operations.

To protect your hearing, do not listen to audio at a high volume for a long period of time.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. When using the product, keep it at least 15 cm away from such medical devices. Consult the manufacturer of your medical equipment for more information.
Ideal temperatures: 0°C to 35°C for operating; -20°C to +45°C for storage.
Ensure that the power adapter meets the requirements of IEC/EN 62368-1 and has been tested and approved according to national or local standards.
Remember to comply with all relevant laws and regulations, and exercise caution if using the device while driving.
Wearing the device may affect your ability to perceive dangers and alerts in your environment. Please wear the device in safe environments only.
Keep this device and its accessories that may contain small components out of the reach of children. Otherwise, children may damage this device and its accessories by mistake, or swallow the small components, which may cause choking.
Avoid immersing the device and its accessories in deep water, as this can cause short circuits or damage to the earbuds.
Avoid disassembling or modifying your device and its accessories. Unauthorized disassembly and modifications may result in voiding the factory warranty. If your device is faulty, visit an authorized Huawei Customer Service Center for assistance.
The earbuds (excluding the charging case) comply with the IP54 (IEC 60529) requirements. This product is not a pro-level water-proof device, but is splash-, water-, and dust-resistant during normal use. It has been subject to lab tests under controlled conditions, which indicate that it meets the IP54 level under the IEC 60529 standard. Splash, water, and dust resistance are not permanent, and may deteriorate over time with normal use.

Warning:

This device contains a coin, button, or small-sized cell battery. Do not swallow the battery, as it constitutes a chemical burn hazard.
If the coin, button, or small size cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Keep the battery away from fire, excessive heat, extremely low air pressure and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by Huawei or an authorized service provider.
The nameplate of this device is attached to the inside of the charging case lid.

Precautions

Keep the metal contact points on the earbuds and charging case clean. Otherwise, the earbuds may not function properly.
If you experience any skin irritation while wearing the earbuds, remove them and clean them thoroughly. If the issue persists, seek advice from a medical professional.
This device’s firmware will automatically update whenever it connects to a previously paired Honor device (released before the end of 2020) or a previously paired Huawei device, and Wi-Fi or mobile data is enabled. You can disable automatic firmware updates in Settings.
Some heat may be generated when the charging case is wirelessly charged. This is normal and does not indicate any issue with your device. If your device overheats, contact an authorized Huawei Customer Service Center in a timely manner.
Do not overbend or stretch the elastic connector of the earbuds, as doing so can shorten the earbuds’ service life, cause damage, and affect the wearing experience.

Disposal and recycling information
This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service, or visit the website https://consumer.huawei.com/en/.
UK regulatory conformance
Hereby, Huawei Device Co., Ltd. declares that this device T0017/T0017C is in compliance with the relevant statutory instruments in the UK. The full text of the declaration of conformity is available at the following internet address: https://consumer.huawei.com/certification.
EU Regulatory Conformance
Hereby, Huawei Device Co., Ltd. declares that this device T0017/T0017C is in compliance with the following Directive RED 2014/53/EU, RoHS 2011/65/EU, EU REACH regulation, and Batteries (where included) directive.
The full text of the EU declaration of conformity and most recent information about accessories & software are available at the following internet address: https://consumer.huawei.com/certification.
Frequency Bands and Power
T0017: Bluetooth: 2.4 GHz 10 dBm.
T0017C: Bluetooth: 2.4 GHz 8 dBm.
RF Exposure Information
For the countries that adopt the SAR limit of 2.0 W/kg over 10 grams of tissue. The device complies with RF specifications when used near your ear, limbs or at a distance of 0.5 cm from your body.
T0017: The highest reported SAR value: Head SAR: 0.11 W/kg.
T0017C is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed to comply with the limits established by the market that the device will be placed on.
ISED Statement
IC: 25182-T0017
IC: 25182-T0017C
This device complies with CAN ICES-3 (B)/NMB-3(B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Industry Canada compliance
The device complies with RF specifications when used near your ear or at a distance of 0.5 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio waves established by the Industry Canada.
The SAR limit adopted by Canada is 1.6 W/kg averaged over 1 gram of tissue for use against the head or body and 4.0 W/kg averaged over 10 grams of tissue for use on the extremity. The highest SAR value reported to the IC for this device type complies with this limit.
T0017: The highest SAR value reported to the IC for this device type when using at the ear is 0.29 W/kg.
T0017C: The highest SAR value reported to the IC for this device type when using near the body is 0.08 W/kg. When the device is used on the extremities, device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed to comply with the limits established by the market that the device will be placed on.
Legal Notice
Copyright © Huawei Device Co., Ltd. 2023. All rights reserved.
All contents in the documents in the packaging box, including but not limited to information about and portrayals of the appearance, color, size, and supported features of the product (the latest features will come with software updates), are for reference only. The actual product may vary.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of this mark by Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.
Privacy Protection
To better understand how we protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy, or read the privacy policy and service terms using the corresponding app.
Software License Agreement
Please read the software license agreement carefully before using this device. By using the device, you indicate that you agree to be bound by the license agreement. To read the agreement, please visit the following website: https://consumer.huawei.com/en/legal/eula/.
Open Source Software Notice
For the open source software statement of your device, please visit https://consumer.huawei.com/en/opensource/ and search for the device name.
Australia/New Zealand