Marcy ‎AIR-1 Deluxe Fan Bike Owner’s Manual

Marcy ‎AIR-1 Deluxe Fan Bike

NOTE: Please read all instructions carefully before using this product

Model: AIR-1

Retain This Manual for Reference 170329 ASSEMBLY & OWNER’S MANUAL

BEFORE YOU BEGIN

Thank you for selecting the MARCY Deluxe Fan Bike AIR-1 by IMPEX® INC. For your safety and benefit, read this manual carefully before using the bike. As a manufacturer, we are committed to providing you with complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you.

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions:

1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled persons should not use the machine without a qualified person or physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to properly warm up.
11. Never operate the machine if the machine is not functioning properly.
12. Read all warnings posted on the exercise bike.
13. Inspect the exercise bike for worn or loose components before use. Tighten/replace any loose or worn components before use.
14. Care should be taken in mounting or dismounting the exercise bike.
15. This exercise bike is for consumer and home use only.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

WARNING LABEL PLACEMENT

WARNING

• DO NOT MISUSE THIS EQUIPMENT
• The possibility of serious injuries or death or both, (if applicable) may occur if caution is not used.
• Before beginning any exercise program, consult your physician.
• Read the user’s manual. All warnings and instructions must be read and followed and proper instructions be obtained before use.
• Replace this label if damaged, illegible, or removed.
• Keep children and pets away from this equipment.

CAUTION AVOID SHEER AND PINCH POINTS

• Keep fingers and body parts clear and away from all sheer and pinch points. Injury may occur if fingers become entangled in moving parts.

The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer, Main Frame.

If the labels are missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the labels in the location shown.

NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

ASSEMBLY INSTRUCTION

• Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP-1

• Do not tighten Bolts until instructed to do so.
• Attach the Front Stabilizer (#39) to the Main Frame (#35). Secure it with four M8 x 5/8” Allen Bolts (#5) and four ∅ 5/8” Washers (#6).
• Attach the Rear Stabilizer (#55) to the Main Frame. Secure it with four M8 x 5/8” Allen Bolts (#5), and four Ø 5/8” Washers (#6).
• Securely tighten all Bolts.
• Use the four Floor Level Adjustment Knobs (#38) to stabilize the Bike on floor.

STEP 2

• Connect the Upper Computer Wire (#2) from the Front Post to the Computer Wire from the Computer (#1).
• Attach the Computer to the Front Post (#4). Secure it with four Computer Philips Screws (#3).

STEP 3

• Connect the Lower Computer Wire (#37) from Main Frame (#35) to the Upper Computer Wire (#2) from Front Post (#4).
• Attach the Front Post to the Main Frame. Secure it with four M8 x 5/8” Allen Bolts (#5).

STEP 4

• Attach the pivot on the Left Swing Handle (#30L) to the pivot on the Main Frame (#35).
• Thread the Swing Handle Shaft – L (#75) through the Left Swing Handle into Main Frame, and firmly secure them together.

STEP 5

• Attach the Swing Handle Connecting Rod (#48) to the open bracket on the bottom of the Left Swing Handle (#30L).
• Secure them together with one M8 x 1 ¾” Allen Bolt (#49) and one M8 Aircraft Nut (#50).

STEP 6

• Attach the pivot on Right Swing Handle (#30R) to the pivot on Main Frame (#35).
• Thread the Swing Handle Shaft – R (#28) through Right Swing Handle into Main Frame, and firmly secure them together.

STEP-7

• Attach the Swing Handle Connecting Rod (#48) to the open bracket on the bottom of the Right Swing Handle (#30R).
• Secure them together with one M8 x 1 ¾” Allen Bolt (#49) and one M8 Aircraft Nut (#50).

STEP-8

• Thread the Left Pedal (#41L) counterclockwise into Left Crank (#44L).
• Thread the Right Pedal (41R) clockwise into the Right Crank (#44R).

STEP-9

• Remove the three Ø 5/8” Seat Flat Washers (#32) and M8 Seat Aircraft Nut (#33) from the Seat Pad (#31).
• Attach the Seat Pad to the Seat Post (#34). Secure it with the three Ø 5/8” Seat Flat Washers (#32) and M8 Seat Aircraft Nut (#33) from the Seat Pad (#31).

STEP-10

• Insert the Seat Post (#34) into the opening one Main Frame (#35).
• Thread the Lock Knob (#63) through the hole on Seat Post to securely hold it at desired height.

EXPLODED DIAGRAM

PARTS LIST

PART NO.| ****

DESCRIPTION

| ****

SPEC.

| ****

QUANTITY

---|---|---|---
1| Computer| TZ-2119| 1
2| Upper Computer Wire|  | 1
3| Computer Philips Screw|  | 4
4| Front Post|  | 1
5| Allen Bolt| M8 x 5/8”| 12
6| Washer| Ø 5/8”| 8
7| Hex Flange Nut| M10 Zinc Plated| 4
8| Locking Bolt| M6 x 2 3/8”| 3
9| U-shaped Plate|  | 3
10| Lock Washer| Ø ½”| 4
11| Hex Nut| M6| 4
12| Philips Screw| M6 x ½”| 5
13| Hex Thin Nut| M10| 6
14| Fly Wheel Shaft|  | 1
15| Axle Locking Ring| Ø ¾”| 2
16| Aircraft Nut| M5| 3
17| Bearing| 6000Z| 4
18| Left Cover Net|  | 1
19| Plastic Wheel|  | 1
20| Right Cover Net|  | 1
21| Philips Screw| M5 x 3/8”| 3
22| C Ring| Ø 5/8”| 2
23| Transportation Roller Wheel|  | 2
24| Roller Wheel Shaft|  | 1
25| Foam Grip| 9” Foam Grip| 2
26| End Cap| Ø 1 ¼”| 2
27| Handle Bar Grip| 4 ¾”| 2
28| Swing Handle Shaft – R|  | 1
29| Bearing| 6903ZZ| 4
30L| Left Swing Handle|  | 1
30R| Right Swing Handle|  | 1
31| Seat Pad|  | 1
32| Seat Flat Washer| Ø 5/8”| 3
33| Seat Aircraft Nut| M8| 3
34| Seat Post|  | 1
35| Main Frame|  | 1
36| Computer Wire Connector|  | 2
37| Lower Computer Wire|  | 1
38| Floor Level Adjustment Knob|  | 2
---|---|---|---
39| Front Stabilizer|  | 1
40| Stabilizer End Cap|  | 4
41L| Left Pedal|  | 1
41R| Right Pedal|  | 1
42| Nut Cap|  | 4
43| Hex Flange Nut| M10| 4
44L| Left Crank|  | 1
44R| Right Crank|  | 1
45| Nylon Washer| Ø 1 1/8” x ¼”| 2
46| Stabilizer Leverage Knob|  | 4
47| Leverage Knob Plastic Pad|  | 4
48| Swing Handle Connecting Rod|  | 2
49| Allen Bolt| M8 x 1 ¾”| 2
50| Aircraft Nut| M8| 2
51| Plastic Bushing| Ø 5/8” x ½”| 4
52| Sleeve| Ø 7/8” x 7/8”| 2
53| Sleeve| 2 3/8” x 1 1/8”| 1
54| Crank Connector|  | 2
55| Rear Stabilizer|  | 1
56| Locking Bolt| M6| 1
57| Philips Tapping Screw| ST4.2 x ¾”| 3
58| Chain Wheel Axle|  | 1
59| Chain|  | 1
60| Pan Head Tapping Screw| ST4.2 x 2 3/8”| 1
61| Pan Head Tapping Screw| ST4.2 x ¾”| 16
62| Left Shroud|  | 1
63| Lock Knob|  | 1
64| Sensor Holder|  | 1
65| Axle Lock Ring| Ø ¾”| 2
66| Arc Washer| Ø ¾”| 1
67| Bearing| 6004ZZ| 4
68| Chain Plate Axle|  | 1
69| Crank Wheel|  | 1
70| Shroud Sleeve|  | 1
71| Right Shroud|  | 1
72| U-shaped Stopper|  | 1
73| Belt|  | 1
74| Locking Clip|  | 2
75| Swing Handle Shaft – L|  | 1

CARE, MAINTENANCE AND STORAGE ****

1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately.
2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.
3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame.
4. The Bike shall be placed at least 24 inches away from the wall or/and any other object such as furniture to provide safe access to and passage around the machine.
5. To avoid possible injury, the help of two or more people is needed when moving the machine around.
6. Disposal Instructions – The equipment can be safely disassembled and disposed of without unreasonable hazards. Call your local recycling agency regarding details of recycling.
7. The maximum user weight is 300 lbs.
8. Assembled Dimension: 45” x 25” x 47.5″

OPERATING NOTES

SEAT ADJUSTMENT

• The seat height ranges from 29” to 41”.
• Loosen and pull out the Lock Knob. Slide the Seat Post to the selected scale marked on the Seat Post, then release the Lock Knob and securely fasten the Knob to lock the Seat Post.
• The seat height adjustment is in approximately 1 ½” increments.

TRANSPORT

• The Bike has a pair of transport Roller Wheels on the Front Stabilizer. To move, carefully tilt and roll.

COMPUTER

• MODE Press the “MODE” button, will automatically scan Time, Speed, RPM, Distance, and Calories, every 6 seconds.
• Time Display the elapsed time. The max value is up to 99:59.
• Speed Display the current speed in miles per hour.
• RPM Display repetition/min, Speed, and RPM display will switch to each other every 6 seconds.
• Distance Display the distance traveled in Miles. The max value is 99.99 miles.
• Calories Display the calorie consumption in cal. Increment by 10 cal. The max value is 999 calories.
• SET
  • To set up the hour, minute, year, month, and date.
  • To set up the target value of Time, Distance, and Calories.
• RESET
  • Press the button to reset the function value from the previous setting.
  • Press the button and hold for 2 seconds to reset all values to zero.
  • When the computer is in idle mode, the screen will display Calendar, Clock, and Temperature.
• CALENDAR Display date, month, and year.
• CLOCK Display current clock time.
• TEMPERATURE
  • Displays current room temperature from 50°F to 140°F.
  • To set up time and date; remove the batteries for a few seconds, and then place the batteries back.
  • The computer will beep and display “8888” and display the Time/Date field.
  • Press the “SET” key to enter the Time or Date field. Press the “MODE” key to enter time/Date data.

REPLACE BATTERY:

• Remove the battery cover on the back of the computer.
• Replace two 1.5V (AA) batteries.
• Make sure the batteries are installed correctly and the polarities are correct.
• If the display is not clear or only partial segments appear, remove the batteries and wait for 15 seconds before re-install them.
• The battery life is approx. 3 months under normal usage.
• When the batteries are removed, all the functional values will reset to zero.

Note: Please note all values on this computer are approximate and they are for comparison purposes only. Do not use these values for any medical or rehabilitation purpose.

IMPEX® INC.

LIMITED WARRANTY

IMPEX Inc. (“IMPEX®”) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX’s obligation under this Warranty is limited to replacing or repairing, at IMPEX’s option.

All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling the IMPEX Customer Service Department at 1-800-999-8899. All freight for products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage, or repairs not provided by an IMPEX-authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX.

IMPEX is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product or other damages concerning any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in their scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.

• This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
• Register on-line www.marcypro.com

IMPEX® INC.

• 2801 S. Towne Ave. Pomona, CA 91766

ORDERING REPLACEMENT PARTS

• Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899 during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific Standard Time.
• support@impex-fitness.com
• When ordering replacement parts, always give the following information.
  • Model
  • Description of Parts
  • Part Number
  • Date of Purchase

IMPEX® INC.

• 2801 S. Towne Ave, Pomona, CA 91766
• Tel: 800-999-8899
• Fax: 626-961-9966
• www.marcypro.com
• support@impex-fitness.com

Toll-Free Customer Service Number

• 1-800-999-8899
• Mon. – Fri. 9 a.m. – 5 p.m. PST
• www.marcypro.com
• support@impex-fitness.com

Frequently Asked Questions

What is the maximum user weight for the Marcy AIR-1 Deluxe Fan Bike?

The maximum user weight for the Marcy AIR-1 Deluxe Fan Bike is 300 lbs.

How do I adjust the seat height on the Marcy AIR-1 Deluxe Fan Bike?

To adjust the seat height, loosen and pull out the Lock Knob, slide the Seat Post to the selected scale marked on the Seat Post, then release the Lock Knob and securely fasten the Knob to lock the Seat Post. The seat height adjustment is in approximately 1 ½” increments.

How do I move the Marcy AIR-1 Deluxe Fan Bike for transport?

The Marcy AIR-1 Deluxe Fan Bike has a pair of transport Roller Wheels on the Front Stabilizer. To move, carefully tilt and roll.

What does the computer on the Marcy AIR-1 Deluxe Fan Bike display and how do I use it?

The computer displays various metrics including Time, Speed, RPM, Distance, and Calories. You can press the MODE button to cycle through these metrics. Additionally, you can set up the hour, minute, year, month, and date using the SET button. The computer also displays Calendar, Clock, and Temperature when in idle mode.

How do I replace the battery for the computer on the Marcy AIR-1 Deluxe Fan Bike?

To replace the battery, remove the battery cover on the back of the computer, replace two 1.5V (AA) batteries ensuring correct polarity, and reattach the battery cover. If the display is not clear or only partial segments appear, remove the batteries and wait for 15 seconds before reinstalling them. The battery life is approximately 3 months under normal usage.

What is the warranty for the Marcy AIR-1 Deluxe Fan Bike offered by IMPEX Inc.?

IMPEX Inc. offers a limited warranty on the Marcy AIR-1 Deluxe Fan Bike, which covers defects in workmanship and material under normal use and service conditions for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. For more details on the warranty, customers can contact IMPEX Inc. through their Customer Service Department.

How do I clean and maintain the Marcy AIR-1 Deluxe Fan Bike?

You can clean the bike using a damp cloth and mild non-abrasive detergent. Avoid using solvents. Inspect and tighten all parts each time you use the machine, and replace any worn parts immediately. Store the bike indoors to prevent rust on the frame. Make sure to keep it at least 24 inches away from walls or other objects for safe access.

Can I use the Marcy AIR-1 Deluxe Fan Bike outdoors?

No, the Marcy AIR-1 Deluxe Fan Bike is intended for indoor use only. It should not be used outdoors to avoid exposure to moisture and other environmental factors that could damage the bike.

How do I assemble the Marcy AIR-1 Deluxe Fan Bike?

Assembly instructions are provided in the manual. It is recommended that two or more people assemble the machine to avoid possible injury. Tools required for assembling the machine include one Crossing Wrench and Allen Wrench, which are provided by the manufacturer. The manual contains step-by-step instructions and diagrams to guide you through the assembly process.

What should I do if I encounter missing or damaged parts during assembly of the Marcy AIR-1 Deluxe Fan Bike?

If you encounter missing or damaged parts during assembly, you can contact IMPEX Inc.'s TOLL-FREE customer service number for immediate assistance. Their Customer Service Agents will provide direct assistance to ensure complete satisfaction.

Is there any specific maintenance required for the fan mechanism of the Marcy AIR-1 Deluxe Fan Bike?

No specific maintenance is mentioned for the fan mechanism in the provided manual. However, users should ensure that the fan blades are clean and free from debris for optimal performance.

Can I use the Marcy AIR-1 Deluxe Fan Bike if I have pre-existing health problems?

Before beginning any exercise program, especially individuals over the age of 35 or persons with pre-existing health problems, it is important to consult with a physician. This precaution is mentioned in the safety precautions section of the manual.

Video- Product Overview

Download The PDF link:Marcy ‎AIR-1 Deluxe Fan Bike Owner’s Manual

Reference:Marcy ‎AIR-1 Deluxe Fan Bike Owner’s Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>