Fujica FU.JICA Z 2 Reflex Zoom Movie Camera Instruction Manual
- June 17, 2024
 - Fujica
 
Table of Contents
Fujica FU.JICA Z 2 Reflex Zoom Movie Camera

Product Information
- The FU.JICA Instant Load Z-2 Reflex Zoom Movie Camera is a versatile 8mm camera that allows for various effects such as fade-ins, fade-outs, lap dissolves, and zooming. It is the only instant load 8mm movie camera with a built-in backwind for professional effects. The camera features automatic or manual exposure control, a diopter lens for precise focusing, and a pin-point zoom control.
 - The camera is equipped with a Fujinon Zoom lens with a focal length range of 8.5mm to 34mm and a maximum aperture of f/1.8. It has a variable shutter control with speeds of 1/40th, 1/80th, 1/160th of a second at 18 frames per second (fps), and up to 1/216th of a second at 24 fps. The camera operates on four AA penlite cells for film drive and one 2.6 volt mercury cell for the exposure system.
 
Specifications
- Lens: f/1.8 Fujinon Zoom 8.5 to 34mm
 - Focusing Range: 3.3 feet to Infinity
 - Exposure Control: Fully automatic CdS electric eye with manual override
 - Film Speeds: 18 and 24 fps
 - Battery Complement: Four AA penlite cells for film drive, one 2.6 volt mercury cell for exposure system
 - Footage Counter: Start to 50 feet, resets to 0 when film chamber is opened
 - Shutter: Push-button type with safety lock
 - Remote Control: Built-in provision and 13-foot cord (extra accessory)
 - Variable Shutter: 1/40th, 1/80th, 1/160th of a second at 18 fps, up to 1/216th of a second at 24 fps
 - Rewind: Rewind lever for intentional double exposures and lap dissolves
 
Product Usage Instructions
Loading the Film Cartridge
- Open the film chamber by sliding the lever located on the camera body.
 - Insert the film cartridge into the chamber, making sure it is securely seated.
 - Close the film chamber by sliding the lever back into its original position.
 - Verify that the film cartridge identification window shows the correct film type.
 
Powering the Camera
- Insert four AA penlite cells into the battery chamber located on the camera body.
 - Insert one 2.6 volt mercury cell into the designated slot in the camera.
 - Press the battery tester button to check the battery levels. The meter will indicate the battery status.
 
Adjusting Exposure Settings
- Set the film speed by rotating the ASA dial to the desired value (16 to 400).
 - Select either automatic or manual exposure control using the appropriate switch or dial.
 - If using manual exposure control, adjust the aperture from f/1.8 to f/16 based on lighting conditions.
 
Focusing and Framing
- Use the through-the-lens split-image rangefinder or focusing ring to achieve precise focus.
 - Click stops at hyperfocal distances of 5 and 15 feet are available for quick focusing.
 - Frame your shot by looking through the viewfinder and adjusting the camera position as needed.
 
Recording Videos
- Press the run button to start recording at the selected film speed (18 or 24 fps).
 - Press the run button again to stop recording.
 - For single-frame recording, switch to the single frame mode and press the run button for each frame.
 
Applying Effects
- To create fade-in or fade-out effects, use the variable shutter control to adjust the desired speed.
 - For lap dissolves, use the rewind lever to intentionally expose multiple frames on the same section of the film.
 
FAQ
- 
Q: Can I use the camera without batteries?
A: No, the camera requires batteries for both film drive and exposure control. Make sure to have the appropriate batteries inserted before using the camera. - 
Q: How do I rewind the film?
A: Use the rewind lever located on the camera to rewind the film. This is useful for intentional double exposures or lap dissolves. - 
Q: Can I use a remote control with this camera?
A: Yes, the camera has a built-in provision for a remote control. You can purchase an extra accessory remote control and connect it to the camera using the provided 13-foot cord. - 
Q: What film speeds are available?
A: The camera supports film speeds of 18 and 24 frames per second (fps). You can select the desired film speed using the appropriate dial on the camera. - 
Q: How do I check the battery levels?
A: Press the battery tester button located on the camera to check the battery levels. The meter will indicate the status of the batteries. 
Fujica-FU.JICA-Z-2-Reflex-Zoom-Movie-Camera-product
- Instant Load Cartridge
 - Built-in Pressure Plate
 - Fully Automatic or Manual
 - Variable Shutter
 - 1/ 40th, 1I80th, 11l 60th Sec. at 18 fps and up to 1I216th Sec. at 24 fps
 

The only instant load 8mm movie camera that has a built-in backwind for professional effects.

SPECIFICATIONS
- Lens: fi l.8 Fujinon Zoom 8.5 to 34mm. All elements internal and protected. Operates through internal gearing with zoom bar conveniently located on top of camera body.
 - Focusing: Through-the-Iens, split-image rangefinder or focusing ring equipped with click stops at hyperfocal distances of 5 and 15 feet.
 - Range: 3.3 feet to Infinity.
 - Exposure Control: Fully automatic CdS electric eye with film sensitivity automatically set by cartridge. ASA range: 16 to 400. Manual override with stops from fl l.8 to fl 16.
 - Film Speeds: 18 and 24 fps, governor controlled. Single frame.
 - Battery Complemen t: Film drive: four AA penlite cells.
 - Exposure system: one 2.6-volt mercury cell.
 - Footage Counter : “S” (start) to 50 feet. Resets to “0 ” when fi lm chamber is opened.
 - Shutter : Push-button type with provision for cable release; safety lock.
 - Remote Control : Built-in provision and 13 foot cord. (Extra accessory )
 - Variable Shutter : Closes completely for fade-in and fade-out effects. 1 140th, 1/ 80th, I I 160th Sec. at 18 fps and up to 1!2 16th Sec. at 24 fps.
 - Rewind : Rewind lever for intentional double exposures, lap dissolves.
 - Accessories : Closeup lens, remote control cable, rubber eyecup, lens shade, safety wrist strap, compartment C<else, soit p_Oll.ch case.
 

FUJICA division of Ehrenreich Photo-Optical Industries, Inc ., Garden City, N.
Y. 11533
Western Division : Gary Lehmann, Inc ., San Francisco , Calif. 94105
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>