THE ZOOFAMILY K22 Walkie Talkie User Manual
- June 17, 2024
- THE ZOOFAMILY
Table of Contents
THE ZOOFAMILY K22 Walkie Talkie
In the process of compiling this manual, we strive for the accuracy and completeness of the content, but Our company will not assume any responsibility for possible errors and omissions. Our company reserves the right to change product design and specifications. Due to the continuous development of technology, product design, and specifications are subject to be changed without notice.
User safety information
Please read the following safety information for your safe and efficient use:
- Please turn off the walkie-talkie before entering the flammable and explosive environment.
- Do not replace or charge the battery in a flammable and explosive environment.
- Do not use the walkie-talkie with a damaged antenna. The damaged antenna may cause slight burns if it touches the skin.
- The maintenance work of the walkie-talkie can only be carried out by professional and technical personnel, please do not disassemble or assemble it by yourself.
- In order to avoid problems caused by electromagnetic interference or electromagnetic compatibility, please turn off the walkie-talkie in the place where the “Please turn off the walkie-talkie” sign is affixed.
- This walkie-talkie does not have full waterproof performance. please keep it dry.
- Do not expose the walkie-talkie to direct sunlight for a long time or put it near a heating device.
- When the walkie-talkie is transmitting, keep the walkie-talkie in a vertical position and speak close to the microphone. If you wear the walkie-talkie on your body, please make sure that the antenna is at least about 5 cm away from your body when the walkie-talkie is transmitting.
Product Style
Function
Description
Introductory Guide
- Rotate the back clip to the upper right.
- Push down the battery cover.
- Insert 4 AAA batteries close the battery cover, and press down.
- Rotate the back clip to the lower left.
Turn on/off the walkie-talkie
Insert the battery, and press the turn-on button for 3-4 seconds, the walkie-
talkie will beep once and the display is on, indicating normal boot. Press the
turn-off button for 3-4 seconds, the walkie-talkie will beep once and turn off
the screen display. indicating that it has been shut down normally.
Power display
The battery icon on the screen displays the battery level, from full to empty.
A periodic “beep” sound or the entire screen display has dimmed, indicating
that the battery is low and the battery needs to be replaced or recharged.
Set volume
In the power-on state, short-press the button to increase the volume, and
short-press the button to decrease the volume. The volume is divided into 1-8
[evels, which are marked by a vertical line icon on the display.
Set up channel
Turn on the walkie-talkie, short press the menu button once to enter the
channel setting, and the channel number on the screen starts to flash; use the
/ button to select the channel; after setting, press the PTT button to save
the setting.
Set group code/CTCSS
Turn on the walkie-talkie, short press the menu button twice to enter the
group code setting, and the channel numbers on the screen start to flash; use
the / buttons to select the group code; after setting, press the PTT button to
save the setting.
Turn on/off the flashlight
In the power-on state, short press the flashlight button to turn on the
flashlight, and short press the flashlight button again to turn off the
flashlight.
Set call tone/Lock screen
Send ringtone function, send different ringtones to other walkie-talkies,
short press the Call tone button to send ringtones; there are 1~10 call tones
to choose from. Turn on the walkie-talkie, short press the menu key three
times to enter the Call tone mode setting; use the / buttons to select; after
setting, press the PTT button to save the setting. Long press for 3-4 seconds
to turn on the lock screen with a beep to prevent accidental touch, and the
button sound changes. Long press again to release.
Voice signal transmission/reception
Before communication, set the channel and group code of the multiple walkie-
talkies to be communicated to be consistent. Long press the PTT button, speak,
and send a voice signal Release the PTT button to receive the voice signal.
Product Parameter
- Product name: kids walkie-talkie toy
- Product model: ZF-K22
- Frequency:446.00625-446.09375MHz
- RF output power: ≤ 0.5WWorking voltage:4.3V-6V
- Communication distance: 1-3 kilometers(depending on geographical location and ring mirror)
- Encryption: CTCSS/ DCS
- Number of channels(simplex): 16
- Frequency stability: 5ppm
Precautions
- Regularly check whether the casing and other parts are damaged, and if any damage is found, stop using it until the repair is complete;
- If there are any obvious damaged parts, please stop using it and keep it away from children. Do not let children play with integrated, damaged, or deformed toys, so as to avoid accidental swallowing, suffocation, and other dangers.
- Do not store in a place near the fire, high temperature, and humidity;
- When the machine is not used for a long time, please remove the battery and place it properly.
Battery use and safety precautions:
- The walkie-talkie does not have a charging function, and the battery cannot be charged directly into the walkie-talkie;
- It can only be charged by rechargeable batteries in a dedicated battery charger;
- Pay attention to the positive and negative positions when installing the battery.
Maintenance
Do not immerse in water or place in a humid environment; Pay attention to cleaning and dustproof, and wipe the surface stains with a dry cloth.
Battery Warning:
- Do not mix old and new batteries. (if more than one batteries are used).
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Alkaline batteries are recommended. Use only the specified voltage.
- Insert batteries using the correct polarity. Always use, replace, and recharge (if applicable) batteries under adult supervision.
- Do not attempt to charge non-rechargeable batteries.
- Do not short-circuit the battery supply terminals.
- Do not dispose of batteries in fire: batteries may explode or leak.
- Remove batteries before storing.
- Recycle or dispose of batteries according to federal, state, and local laws.
- Keep these instructions for future reference.
Warranty:
Thank you for your support of our products, enjoy the warranty service QR code
scan. Please scan the warranty QR code below and fill all in the requested
details on our website, you will receive a confirmation of this scan. The
warranty period of two years applies from the date of purchase.
Scan me
Attention ; the following items are not covered by the warranty:
- Damaged due to improper use or maintenance by the customer.
- Damage caused by disassembly or modification of the product.
- Using incompatible parts that are not manufactured by our company.
- Normal wear and tear.
- Damage caused by abusive use.