EDGE of EMBER Ring Size and Necklace Lengths Guide User Guide
- June 17, 2024
- EDGE of EMBER
Table of Contents
EDGE of EMBER Ring Size and Necklace Lengths Guide
Product Information
- The Ring Size Guide is a tool designed to help you find your ring size accurately.
- It includes a detailed guide and a cut-out ring sizer that can be printed on A4 paper at 100% scale for precise measurements.
- It is important to check the accuracy of the printed guide by measuring the below line, which should be 25mm in length.
Product Usage Instructions
Method 1: Measure an Existing Ring
- Place your ring on the circle chart provided in the guide.
- Match the inside edge of the ring to the closest size on the chart.
- The letter and number combination inside the circle represents the size of that ring.
Note: Different fingers may have different sizes, so make sure to check different ring sizes for each finger. If your ring falls between two sizes, always choose the larger size.
Using the Ring Sizer
- Cut out the ring sizer provided in the guide.
- Create a slit where the orange line is indicated.
- Wrap the sizer around your finger and insert the pointed end through the slit.
- Tape the sizer where it feels comfortable and test sliding it on and off your finger.
Again, if the measurement falls between two sizes, it is recommended to choose the larger size for a better fit.
Reading Your Size
The size chart provided in the guide lists the corresponding sizes for UK and US standards. Locate the number that aligns with your measurement to determine your ring size.
Specifications
- Printout size: A4
- Scale: 100%
- Accuracy check: Measure the below line, it should be 25mm
FAQ
Q: Can I use the ring size guide for all types of rings?
- A: Yes, the ring size guide can be used for all types of rings.
Q: What if my ring size falls between two sizes?
- A: In such cases, it is recommended to choose the larger size for a more comfortable fit.
Q: Can I use the ring sizer multiple times?
- A: Yes, the ring sizer can be reused multiple times.
Ring size guide
- Find out your ring size once and for all with our detailed guide and cut-out ring sizer below.
- Print this guide out at 100% on A4 to ensure accuracy. Check the printout is accurate by measuring the below line, it should be 25mm.
Method 1: Measure an existing ring
- Place your ring on the circle chart below and match the inside edge of the ring to the closest size on the chart.
- The letter, and number combination inside the circle is the size of that ring.
- Make sure to check different ring sizes for different fingers, as each finger may have a different size.
- If your ring falls in between two sizes, always go for the larger size.
Method 2: Measure your finger
- Cut out our ring sizer below and create a slit where the orange line is. Wrap the sizer around your finger and slip the pointed end through the slit.
- We recommend taping it where it feels comfortable and testing sliding it on and off your finger.
- If it sits in between two sizes, again we would suggest going for the larger size.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>