Cacazi ‎A10 Wireless Doorbell Kit User Manual

Cacazi ‎A10 Wireless Doorbell Kit

Ac digital wireless doorbell product instruction manual

Product introduction

1. The appearance is exquisite and fashionable, and the product accords with green environmental protection, low carbon, and ultra-low power consumption.
2. The digital doorbell transmitter can be used to avoid interference by using the same frequency code technology.
3. The remote control distance of the open area is up to 300 meters, which is used in the environment of various households, office buildings, hotels, factories, and hotels.
4. The transmitter has the function of waterproof and dustproof, which conforms to IP44 international, and has a battery life of one year (120 calculations per day).

Highlights

• 60 Chimes and Tunes: The doorbell offers a variety of 60 different chimes and tunes to choose from.
• Adjustable Volume: The volume of the doorbell can be adjusted to 5 different levels, according to preference.
• Volume Range: The doorbell supports a volume range from 0 to 110 decibels, which allows it to be very soft or quite loud, depending on the setting.
• LED Light Indicator: It has an LED light that indicates when the doorbell is in use, which is helpful for those who are hearing impaired or in noisy environments.

Product models include

• One drag one model: A10, A10-S
• One drag two models: A10-AB, A10-SAB

Accessories

Note

1. Avoid direct shower of products in water or long direct sunlight.
2. Do not use the transmitter in the metal (such as iron gate/iron frame) to avoid the wireless remote control.
3. Actual remote control distance is determined by using environmental factors.
4. After some time, if the transmitter can’t ring the doorbell, please consider replacing the transmitter battery.
5. When the doorbell receiver doesn’t ring, please confirm whether the receiver is normal.

Reciever Parameter

Installation Method

Receiver Installation:

• Plug the receiver directly into the power socket to take power. (AC 220V)

Emitter Installation

Solution A: Mounting the Button with Double-Sided Tape

• Prepare the Surface: Ensure the surface where you plan to mount the button is clean, dry, and flat. This could be near your front door or any other location where visitors are likely to press the doorbell.
• Attach Double-Sided Tape: Remove the protective film from one side of the double-sided tape and attach it to the back of the doorbell button.
• Position the Button: Remove the remaining protective film from the other side of the double-sided tape. Press the doorbell button firmly against the prepared surface for about 30 seconds to ensure it is securely attached.

Solution B: Mounting the Button with Screws and Anchors

• Mark the Drill Points: Hold the back plate of the doorbell button against the wall where you want to install it. Use a pencil to mark the drill points through the holes provided in the back plate.
• Drill Holes: Drill holes at the marked points, ensuring they are the correct size for the wall anchors.
• Insert Wall Anchors: If you’re mounting the button on drywall or masonry, insert the wall anchors into the drilled holes. For wooden surfaces, you may be able to screw directly into the material without anchors.
• Attach the Back Plate: Line up the back plate over the anchors and screw it into place. Do not over-tighten the screws, as this could damage the back plate or the wall.
• Attach the Button: Once the back plate is secure, attach the doorbell button to the back plate. It should snap into place or slide on, depending on the design.

Note: After installation, you should test the doorbell button to ensure it’s functioning correctly by pressing it and confirming that the indoor receiver chimes. If the doorbell does not function, check the battery in the button and ensure the indoor receiver is powered and within range.

• Method A – Adhesive:
  • Glue the side glue to the bottom of the launcher.
  • Paste the bottom shell on the wall.
• Method B – Screw Fixation:
  • Screw in the back cover of the emitter.
  • Drill and install screws on the wall to fix the bottom case.

Battery Installation:

• Install the battery according to the instructions provided. Note: Other types of launchers may have different installation methods.

Volume Adjustment

• Locate the Volume Control: On the doorbell receiver, find the volume control button. It is typically indicated by an icon with sound waves or a speaker.
• Adjusting the Volume: Press the volume control button to cycle through the volume levels. There are 6 levels of adjustable volume, from silent at 0 dB to very loud at 110 dB.
• Setting a Silent Mode: If you need the doorbell to be silent (for example, when a baby is sleeping), you can set the volume to 0 dB to ensure no sound will be made. This may be indicated on the doorbell receiver with a specific button or by cycling through to the lowest volume setting.
• Visual Indicator: When the doorbell is set to a silent mode (0 dB), the LED light indicator will still flash to alert you when someone is at the door, ensuring you’re notified without disturbing the silence.
• Test the Volume Settings: After adjusting the volume, press the doorbell button to test the sound level. Make sure it’s loud enough to be heard in the desired areas of your home or verify that it remains silent when set to 0 dB.

Product Dimensions

For the receiver (left image):

• Width: 2.5 inches (6.5 cm)
• Height: 3.7 inches (9.5 cm)
• Depth: 0.9 inch (2.4 cm)

For the transmitter or doorbell button (right image):

• Width: 2.0 inches (5.1 cm)
• Height: 2.9 inches (7.5 cm)
• Depth: 0.7 inch (2.0 cm)

Certificate of conformity

• The product is approved and approved.
• Date of inspection:
  • Inspector: check 01

Warranty Information

Thank you for purchasing the Cacazi products, in the spirit of your responsibility, and to ensure that we can provide quality after-sales service, the product warranty is as follows:

If the product fails, you need to hold a warranty and purchase documents at the local designated service center, and you can enjoy free warranty service.

Rework logistics costs borne by the customer.

The following conditions will lead to failure of the warranty or not part of the scope of after-sales service commitments, which can only be paid after- sales service.

• More than the warranty period.
• Non-authorized by the company» ‘s legitimate distribution channels sold products.
• The user is not used or not by the instructions to use the product caused by the use of failure.
• Unauthorized removal of the product, resulting in damage to the shell or internal circuit (human factors).
• Due to accidental or force majeure disasters (such as fires, floods, earthquakes, lightning accidents, etc.) caused by the failure.

Please refer to the relevant laws and regulations if there are any outstanding issues or disputes. Our company has the change and final interpretation of this regulation.

Warranty Card

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Frequently Asked Questions

How many chimes and tunes does the Cacazi A10 Wireless Doorbell Kit offer?

The Cacazi A10 Wireless Doorbell Kit offers a variety of 60 different chimes and tunes to choose from.

What is the range of the remote control distance for the Cacazi A10 Wireless Doorbell?

The remote control distance in open areas is up to 300 meters, providing reliable operation even in large spaces.

How long does the battery in the transmitter of the Cacazi A10 Wireless Doorbell Kit last?

The transmitter of the Cacazi A10 Wireless Doorbell Kit has a battery life of one year with regular usage, which equates to approximately 120 activations per day.

Is the Cacazi A10 Wireless Doorbell suitable for outdoor installation?

Yes, the transmitter of the Cacazi A10 Wireless Doorbell Kit is IP44 waterproof and dustproof, making it suitable for outdoor installation.

What should I do if the receiver of the Cacazi A10 Wireless Doorbell does not ring when the transmitter is pressed?

First, check the battery in the transmitter to ensure it is functioning properly. Also, ensure that the receiver is within range and powered.

How can I adjust the volume of the Cacazi A10 Wireless Doorbell?

Use the volume control button on the receiver of the Cacazi A10 Wireless Doorbell to adjust the volume to one of the six available levels, ranging from silent to very loud.

Does the Cacazi A10 Wireless Doorbell Kit come with a warranty?

Yes, the Cacazi A10 Wireless Doorbell Kit comes with a warranty. Refer to the warranty card for specific details and conditions.

Can the Cacazi A10 Wireless Doorbell be installed using adhesive tape or screws?

Yes, the doorbell button of the Cacazi A10 Wireless Doorbell can be installed using either double-sided adhesive tape or screws, depending on your preference and the surface material.

What is the purpose of the LED light indicator on the Cacazi A10 Wireless Doorbell?

The LED light indicator provides visual alerts when the doorbell is in use, which is particularly helpful for those who are hearing impaired or in noisy environments.

Is the Cacazi A10 Wireless Doorbell certified for compliance with relevant standards?

Yes, the Cacazi A10 Wireless Doorbell is approved and certified for compliance with relevant standards, ensuring quality and safety.

Can I pair multiple transmitters with a single receiver in the Cacazi A10 Wireless Doorbell Kit?

Yes, you can pair up to two transmitters with a single receiver in the Cacazi A10 Wireless Doorbell Kit.

What is the procedure for pairing additional transmitters with the receiver in the Cacazi A10 Wireless Doorbell Kit?

To pair additional transmitters, simply follow the pairing instructions provided in the user manual of the Cacazi A10 Wireless Doorbell Kit.

Video- Product Overview

Download The PDF link:Cacazi ‎A10 Wireless Doorbell Kit User Manual

Reference:Cacazi ‎A10 Wireless Doorbell Kit User Manual- fccid.io

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>