amazon 2024 New Upgraded Excavator Toys Instruction Manual

amazon 2024 New Upgraded Excavator Toys

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT.

PACKING LIST

FREQUENCY ALIGNMENT

After inserting the batteries into the excavator and the remote control, push the switches of the excavator and the remote control to the  ON position. If the light at that position flashes, it indicates that the frequency pairing mode has been entered. Once successful frequency pairing is established between the excavator and the remote control, the indicator light will stop flashing,  and you can operate the remote control. If the indicator   light keeps flashing continuously, it indicates that the frequency binding was not successful. In this case, you can turn the excavator and remote control switches to the OFF position and then back to the ON position.

BATTERY INSTALLATION AND REMOVAL

Installation: The excavator needs to install 1 set of 3.7V rechargeable batteries (included). The remote requires 2 x 1.5V “AA” batteries (not included). First, use a screwdriver to open the battery cover, install the battery correctly according to the battery polarity marked in the battery compartment, and then tighten the battery compartment cover with a screwdriver.
Take out: Use a screwdriver to open the battery cover and take out the battery. When the power indicator light on the excavator flashes rapidly, it indicates that the battery power is too low, please replace the battery in time to avoid affecting the experience of using the excavator.

BATTERY PACK REPLACEMENT

Battery Pack: Located at the bottom of the excavator. Use a screwdriver to open the battery cover, remove the battery cover, and then install the 3.7V battery.

Note: In order to prolong the service life  of the battery, if the excavator is not used for a long time, please take out the battery to avoid battery damage.

REMOTE CONTROL FUNCTION

After pressing the power button, the indicator light of the remote control starts to flash, indicating that the remote control is in normal working condition. The buttons at the front of the remote control are used to control the forward digging and reverse pushing of the excavator bucket. The rocker on the left side of the remote control controls the forward and backward movements of the excavator, while the rocker on the right side is used to control the left and right turns of the engineering vehicle. At the same time, the buttons near the two sides of the switch are designed to control the left and right rotation of the workbench, and the workbench can rotate up to 680°.

680° ROTATION

Experience the fun of digging in all directions.

FUNCTION AND OPERATION INSTRUCTIONS

Channels/Simulation

CONSTRUCTION VEHICLES SERIES

Dear Customer,
Thank you for choosing to purchase our construction vehicle series toys. Please check if you have received the complete product. We understand that you have high expectations  for product quality, so we implement strict quality control measures during the production process and strive to ensure that every product is in the best condition. This way, you can receive satisfactory products.

If you have any questions or concerns during use, you can contact us through Amazon, and we will reply to your message within 24 hours. We will do our best to ensure that you have a pleasant shopping experience.
If you have any suggestions or comments, please let us know, as your suggestions are very important to us.

Thank you again for your support and trust in our product. We look forward to providing you with excellent service.

Sincerely,
HIIINII Aftar coloc Corvica Toom

HOW TO CONTACT THE SELLER?

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>