UberGlow B0CPVR36LH Teddy Lamp Instruction Manual
- June 17, 2024
- UberGlow
Table of Contents
UberGlow B0CPVR36LH Teddy Lamp Instruction Manual
- Contents of the package shown below.
- Carefully remove the 4 items from the packaging.
- Fit the Stand to the back face of the Teddy Lamp by pushing the tabs of the Stand in to the slotted holes of the Teddy Lamp until fully pressed against the face, see below. If required for extra stability, use the screw provided to fix the stand to the bear. Philips screw driver required. (not supplied). DO NOT create any other holes for the screw as you may damage internal components.
- Plug the USB C Cable end to the port on the back face of the Teddy Lamp as shown below. Plug the other end of the Cable in to any USB power source, such as USB Power Bank, Computer, Laptop or Phone Charger Block (not supplied).
- The RF Remote Control will work right out of the box. All you have to do is pull and remove the clear tab to engage the battery of the remote control. Shown below are the button functions of the remote control.
- When Painting the Uber Glow™ Teddy Lamp you can use anything from water colours, oils, marker pens and colouring pencils (not supplied). Let the fun begin!
*Note: This applies to the plain white paintable version only.
IMPORTANT!!
- DO NOT submerge the UberGlow™ Teddy Lamp in any liquids.
- Not suitable for children under 3.
- Adult supervision recommended.
- Keep this device away from naked flames.
- DO NOT repair the unit by yourself, contact an authorised specialist to help you.
- All electronics used in UberGlow™ Teddy Lamp are Safety Extra Low Voltage (SELV).
Product Specification
Model: UberGlow™ Teddy Lamp
Manufacturer: UberGlow UK Ltd
Material: MDF (mr) / Acrylic primer
Shape: Teddy Bear
Product size approx: W240mm x H310mm x D25mm (excluding stand).
Voltage: DC 5V
Typical Power Consumption: 5W
For any questions or suggestions please email us at teddy@uberglow.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>