AOTASO 12×16 Inch Marble Stone Drying Mat User Guide

Table of Contents

Specifications

Preparing the Mat

Before using the Accelerated Drying Mat, please follow these steps:

Wipe off the powder on the surface with a wet towel.
Dry the mat in a well-ventilated place for 2-3 days to remove any odor and excess moisture.
If you plan to use silicone foot pads, wipe off the powder of the stone mat before applying them.

Placing and Using the Mat

Follow these guidelines to ensure proper usage of the Accelerated Drying Mat:

Place the mat on a flat floor surface.
Avoid applying excessive pressure on the mat or using it on soft or highly cushioned areas, as this may cause cracking.
Avoid soaking the mat in water or pouring a large amount of water on it, as this may lead to deterioration and warpage.
Avoid drying the mat in direct sunlight or using a heater, as this is not recommended.
Avoid using the mat in areas with a floor heating system, as it may cause warping or cracking.
Do not use detergent-containing surfactants, as they may cause clogging on the surface of the mat.
If the mat absorbs colored water, it may leave a stain.

Maintenance

To keep your Accelerated Drying Mat in good condition, follow these maintenance instructions:

Regularly wipe the surface of the mat with a wet towel to remove any dirt or debris.
If the surface becomes dirty, use the attached sandpaper to brush it and then lightly wipe it off with a wet towel.
Avoid sun drying or using floor heating with the mat.
Do not soak the mat in water for an extended period.
To prevent mold growth, periodically dry the mat in a well-ventilated place. In summer, dry it every 7-10 days, and in winter, dry it every 3-4 days.
After use, lean the mat in a stable place to ensure proper drying and storage.
If the holes on the mat surface become clogged and water absorption decreases, lightly polish it with sandpaper to restore water absorption.
Avoid over-drying the mat, as it may cause warping due to its super water absorption and fast drying performance.

Frequently Asked Questions (FAQ)

Q: Can I use the Accelerated Drying Mat on uneven surfaces?

A: It is recommended to use the mat on a flat floor surface to ensure stability and prevent cracking.

Q: How often should I dry the mat to prevent mold?

A: In summer, dry the mat every 7-10 days, and in winter, dry it every 3-4 days to prevent mold growth.

Q: Can I use detergent to clean the mat?

A: It is not recommended to use detergent-containing surfactants, as it may cause clogging on the surface of the mat.

Q: What should I do if the mat absorbs colored water?

A: If the mat absorbs colored water, it may leave a stain. Take precautions to avoid contact with colored liquids.

Q: How do I restore water absorption if the holes on the mat become clogged?

A: If water absorption decreases due to clogged holes, lightly polish the mat with sandpaper to restore its water absorption capacity.

Both 2 sides can be used

Wipe off the powder on the surface with a wet towel before using this product.
Due to the odor of diatomaceous earth and the large amount of moisture that often accompanies long-distance transportation, dry it in a well-ventilated place for 2-3 days before use.
If you want to use silicone foot pads, please use them after wiping off the powder of the stone mat.
To prevent the occurrence of mold, please dry it in a well-ventilated place from time to time. As a guideline, 7-10 days in summer and 3-4 days in winter. We recommend leaning it in a stable place after use.
If the surface becomes dirty, use the attached sandpaper to brush and then lightly wipe it off with a wet towel. Please do not use it for sun drying or floor heating, and please do not soak it in water for a long time.
As the number of times of use increases, the holes on the mat surface may become clogged and water absorption may decrease In this case, water absorption will be restored if you lightly polish it with sandpaper.
Due to super water absorption and super fast drying performance when a large amount of water is absorbed and then rapidly evaporated (especially in a dry environment such as heating or cooling), the mat may warp due to over-drying.

READ BEFORE USE

A small amount of powder naturally appears on the surface which is NOT a quality problem.
Soaking in water or pouring a large amount of water on the product may cause deterioration and warpage.
Drying in the sun or drying with a heater is NOT recommended. Using it in the place where the floor heating system is included may cause warping or cracking.
Please use it on a flat floor. If you apply too much pressure on the mat or use it in a soft or highly cushioned place, it may crack.
Detergent-containing surfactant may cause clogging on the surface.
If it absorbs colored water, it may remain as a stain.