DJ POWER DFZ-800 Haze Machine Instruction Manual

June 17, 2024
DJ POWER

DJ-POWER-LOGO

DJ POWER DFZ-800 Haze Machine

DJ-POWER-DFZ-800-Haze-Machine-PRODUCT

Specifications

Safety instructions

  • This Device is suitable for indoor use only.
  • All modifications will void the warranty.
  • Repairs have to be carried out by skilled personnel only.
  • Only use fusees s of the same type and original parts as spare parts.
  • Protect the UUnnit from rain and humidity to avoid fire and electrical shocks.
  • Make sure to unplug the power supply before opening the housing.

Instructions for a safe and efficient operation

Be careful with he and extremme temperature

  • Only use the device in a place where no extreme temperatures will occur.
  • Do not keep it in a temperature below 32 F /0°C, or exceeding 104°F /40°C.
  • Avoid exposing it to direct rays of the sun or near a heating appliance.

Keep away from humidity, water, and dust

  • Do not place the set in a location with high humidity or lots of dust.
  • Containers with liquid should not be placed on the set.

Avoid placing it on an unstable location
Select a level and stable location to avoid vibration.

Do not use chemicals or volatile liquids for cleaning

  • Use a clean dry cloth to wipe off the dust. Metal Parts can be cleaned with a wet soft cloth for stubborn dirt.
  • If out of work, contact the sales agency soon

If out of work, contact sales agency soon

  • If any troubles occur, remove the power plug immediately, and contact an engineer for repair, do not open the cabinet by yourself, as it might result in a danger of electric shock.

Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not using the device for an extended period, be sure to disconnect the plug from the receptacle.

IMPORTANT:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified personnel. All electrical and mechanical connections have to be carried out according to the European safety standards

More information on safe use

  • Disconnect the unit from the electricity supply before refilling the liquid.
  • The device must be connected with a 3-pin power cable. It must be connected with the earth.
  • Keep the unit in an upright position at any time.
  • This unit is for adult use only. Keep away from children. Never leave the unit running unattended.
  • The output smoke is very hot. Please keep at least 50cm away from the nozzle during operation.
  • Never aim the output nozzle directly at people.
  • Never aim the output nozzle at open flames.
  • Please cool down the smoke machine before cleaning or maintaining it.
  • Put the unit in a well-ventilated area. Never seal the unit’s vents. Allow a free air space of at least 20cm around the sides and top of the unit to guarantee adequate ventilation.
  • Never add any flammable liquids (such as oil, gas, or perfume) to the smoke liquid.
  • Only use high-quality, water-based liquid recommended by your distributor. Other fog liquids may cause clogging or spouting.
  • Always make sure there is sufficient liquid in the tank. Operating this unit without liquid might cause damage to the pump as well as overheating of the heater.
  • Never drink the fog liquids. If it is ingested, connect with a doctor immediately. If the fog liquids come in contact with skin or eyes, rinse thoroughly with water.
    Note: please pay attention to all the warning labels and instructions printed on the exterior of the unit

Introduction

Thank you for choosing the DJ Power Fazer DFZ-800. We kindly suggest you read this manual carefully before using the unit. Abiding by all the instructions will ensure you long-term stable and satisfactory effects. Please follow these operation, safety, and maintenance instructions to ensure the machine’s normal work and prolong its usage life.

Product Description

  • The DFZ-800 is a fazer that can be used standing on the floor or hung up. It is a very quiet fazer.
  • The Fazer can both be manually controlled by remote control and via DMX and is equipped with a low fluid sensor.

Unpacking
Open the shipping packing and check whether all the necessary accessories to operate the unit have arrived complete and intact. If you can see any faulty parts do not connect the Machine to the power supply and contact your distributor soon.

The shipping packing should contain the following items:

  • Fazer DFZ-800
  • Power cord
  • Remote
  • User Manual

Control

Installation

  • Take out the unit from the shipping package; make sure all the foams and plastic padding are removed, especially in the nozzle areas.
  • Place the unit on a flat surface and remove the tank cap.
  • Fill the tank with high-quality, water-based fog liquid recommended by the distributor. Any other types of liquids may cause spraying water or serious clogging problems. After infusing the liquid, seal the tank with a cap. Be careful that the liquid doesn’t exceed the maximum level. Do NOT OVERFILL.
  • Close the Tank and assure yourself, that no liquids come inside the Machine. If you feel uncomfortable it is also possible to take the tank out of the machine before filling it up. Liquids inside the machine can cause short circuits and could cause danger to your safety.

Starting up the machine

  • Connect the Power Cord (delivered with the machine) to a Power Supply according to the technical Data of the device. Please make sure the device is sufficiently grounded.
  • Turn on the machine with the Power switch on the back.
  • The switch will light up red when the machine is on Power.

Explanation of menu and display
You will find 4 buttons on the machine:

  • MENU : Press the button to scroll through the menu.
  • UP/TIMER: Press the button to increase the value or to activate the timer function.
  • DOWN/VOLUME: Press the button to decrease the value or to activate the volume function.
  • ENTER/STOP: Press this button to get to menu 1. If the device works you will stop the machine

Important: If the language should be set to Chinese, you get from the pictures in the next chapters how to get to the menu item “Language” and can set the language to English there.

Ready to snow

DJ-POWER-DFZ-800-Haze-Machine-FIG-1

Interval

DJ-POWER-DFZ-800-Haze-Machine-FIG-2

  • Press MENU until the display shows “Interval Set”
  • Use the UP / DOWN keys to set an Interval between 5 – 200 seconds

This setup is required if you want to use the Timer function.

Duration

DJ-POWER-DFZ-800-Haze-Machine-FIG-3

  • Press MENU until the display shows “Duration Set”
  • Use the UP / DOWN keys to set the Duration between 5 – 200 seconds.

This setup is required if you want to use the Timer function

Amount of fog

DJ-POWER-DFZ-800-Haze-Machine-FIG-4

  • Press MENU until the Display shows “Volume out”.
  • Use the UP / DOWN keys to set the Output between 1 – 100 %.

This setup is required if you want to use the Volume function.

Volume Out

DJ-POWER-DFZ-800-Haze-Machine-FIG-5

  • Press MENU until the Display shows “Volume out”.
  • Use the UP / DOWN keys to set the Output between 1 – 100 %.

This setup is required if you want to use the Volume function.

Fan speed

DJ-POWER-DFZ-800-Haze-Machine-FIG-6

  • Press MENU until the Display shows “Volume out”.
  • Use the UP / DOWN keys to set the fan speed between 1 – 100 %.

This setup is required if you want to use the Volume function.

Fluid Sensor

DJ-POWER-DFZ-800-Haze-Machine-FIG-7

  • Press MENU until the Display shows “Fluid Sensor”.
  • Use the UP / DOWN keys to choose between ON and OFF. With OFF you activate the fluid sensor; with OFF you deactivate the fluid sensor

DMX Setup

DJ-POWER-DFZ-800-Haze-Machine-FIG-8

  • Press MENU until the Display shows “DMX512 Address”.
  • Use the UP / DOWN keys to set the value between 1 and 512.

Consider that one machine uses 2 DMX channels!

  • Channel 1: DMX value 0 – 5 means that the fan is deactivated. If you raise the level between 6 and 255 you will increase the speed of the fan.
  • Channel 2 DMX value 0 – 5, means that the snow output is deactivated. If you raise the value between 6 and 255 you will increase the snow output

Remote

DJ-POWER-DFZ-800-Haze-Machine-FIG-9

  • Press MENU until the Display shows “Wireless Set”.
  • Use the UP / DOWN keys to choose between ON and OFF. With OFF you activate the remote; with OFF you deactivate the remote

Timer

DJ-POWER-DFZ-800-Haze-Machine-FIG-10

  • Press MENU until the Display shows “Direct Timer”.
  • Use the UP / DOWN keys to choose between YES and NO. With YES you activate the fluid sensor; with NO you deactivate the fluid sensor

Language

DJ-POWER-DFZ-800-Haze-Machine-FIG-11

  • Press MENU until the Display shows “Language”.
  • Use the UP / DOWN keys to choose between English and Chinese

Use of the remote

  • Activate the remote in the menu. Press and hold any key on the remote. The display flashes twice which means that the connection was successful. . The Remote has two buttons. Button A turns on the function, button B will turn off the function. The transmission is able to reach 50 meters.
  • You can assign 5 remotes to every fog machine.
  • If you use the remote the output volume corresponds to your settings for Volume Out.

Fluid Sensor

The Fluid Sensor controls when there is enough fluid left in the tank. You can disable this function:

  • Press Function until the Display shows “Fluid Sensor On”
  • Use the UP / DOWN keys to switch the Sensor on / off
  • Please notice that running low on Fog will cause Damage to the machine.
  • If the Sensor is activated and the fog level is low it will deactivate the pump in between 20 seconds
  • For resetting the fluid sensor there are two possibilities:
  1. Press and hold ENTER. If the fluid is refilled, the sensor after 10s is reset.
  2. In DMX mode you have to set channel 2 to at first value 0 and then to a value >5. If the fluid is refilled, the sensor after 10s is reset.

Important: If you have not used the machine for more than 15 days, please fill out some clean water instead of snow fluid in the tank and run the engine for a few minutes.

Explanation of the hardw

DJ-POWER-DFZ-800-Haze-Machine-FIG-13

  1. Bracket
  2. Safety hole
  3. Nozzle
  4. Quick connector
  5. Fluid tank
  6. Fluid tank baffle
  7. Air vent
  8. Antenna
  9. LC-Display
  10. DMX 3pol
  11. DMX 5pol
  12. Power socket
  13. Power switch

Technical data

Power supply

Voltage| AC 220 – 240 V; 50/60 Hz
Power consumption max.| 1150 W
Fuse| 8A / 250
Connections
Power in| IEC
XLR in/out| 3pol / 5pol
Controlling|
DMX512| Yes
Number of channels| 2
Technical data
Ejection volume| 226 m³ / min
Tank volume| 3,5 l
Fluid consumption| 125min/l
Hardware
Dimensions (L/B/H)| 313 x 310 x 255 mm
Weight| 10,62 kg

FAQ

  • Q: What should I do if the machine comes in contact with skin or eyes?
    • A: Rinse thoroughly with water. Please pay attention to all the warning labels and instructions printed on the exterior of the unit.

B & K Braun GmbH

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals