ATEFR Floor Lamp with APP and Remote Control User Guide
- June 17, 2024
- ATEFR
Table of Contents
ATEFR Floor Lamp with APP and Remote Control
APP Connection and Usage
- Scan the QR code on the right with your mobile phone to download our APP: Lampsmart pro
- Turn on the Bluetooth function on your mobile phone, then enter the APP, click to enter the lamp name naming page.
- Name the lamp in the naming column, select the usage scene, and click the “confirm” button to complete the setting.
- After the lighting is named, click on the main interface of the APP to enter the lamp interface.
- Disconnect the lamp from the power supply and connect it again. Turn on the lamp, click the bluetooth pairing button within 3 seconds, the light bulb will flash once, means the pairing is successful, and you can use the APP to control the lamp now. If fails, and the light does not flash within 10 seconds, please repeat this operation: Power off, re-plug the power, turn on the light, and click the bluetooh pairing button within 3 seconds after turning on the light.
Important Note
- The working range of the remote control is 20 meters.
- 2* AAA batteries are required for the remote control(Not included).
- If you don’t use it for a long time, please take out the batteries.
Warning & Cautions
- Place the lamp on a flat and horizontal surface.
- To avoid breakdown and short circuit, please do not place the lamp in a hot or humid environment.
- Do not look directly into the light beam.
- Do not attempt to open, repair or replace any part of the lamp. This includes all components, power supply and electric cable.
- Do not cover the lamp with flammable material.
- Do not spray any liquid on the lamp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>