Mueller U-700 K-cup Coffee Maker Instruction Manual

Mueller U-700 K-cup Coffee Maker Instruction Manual

Please read this Instruction Manual and the safety instructions before operating the appliance!
At least one copy of this manual should be kept in a location available at all times to maintenance and management staff

Congratulation on your purchase!

Single Server Brewer, manufactured with the greatest care. If you look it after properly it will reward you with many years of good service.
Before using your new machine, please read this operating manual carefully, paying particular attention to the safeguards.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed, including the following:

1. Read all instructions before using.

2. Do not touch hot surfaces. Use handles and knobs when available. Scalding may occur if the coffee brewer is moved or opened or K-Cup® Pack is disturbed during brewing cycles.
   This appliance must be properly installed and located in accordance with these instructions before it is used.

3. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons.

4. Do not place on or near a hot gas or electric burner, or in a heated oven.

5. Do not use outdoors.

6. To protect against fire, electric shock and injury, do not immerse cords, plugs or the appliance in water or any other liquid.

7. Use only water in this appliance! Do not put any other liquids or foods in the Water Reservoir.

8. To disconnect, unplug power cord when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is damaged in any manner. Contact your Customer Service to arrange for replacement or repair.

10. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.

11. Close supervision is necessary when any appliance is used by or near children.

12. Do not open the brewer while brewing is in progress.

13. Do not use appliance for other than intended use.

14. To disconnect, turn any control to “off,” then remove plug from wall outlet.

15. Risk of Fire or Electric Shock. Do not open. No user serviceable parts inside.
    Repair should be done by authorized service personnel only.

16. Do not open the brewer head or take away the cup until the size serving button stop flashing.

CAUTION: There are two sharp needles that puncture the K-Cup® pack, one above the K-Cup® pack Holder and the other in the bottom of the K-Cup® pack Holder. To avoid risk of injury, do not put your fingers in the K-Cup® pack Assembly Housing.

CAUTION: There is extremely hot water/steam in the K-Cup® pack Holder during the brew process. To avoid risk of injury, do not lift the Handle or open the K-Cup® pack Assembly Housing during the brewing process.

‘WARNING: To reduce the risk of fire or electric shock, do not remove any service covers. There are no user serviceable parts inside the coffeemaker. Only authorized personnel should repair the coffeemaker.

Please read ALL of the instructions in this manual carefully before you begin to use this appliance. Proper care and maintenance will ensure a long life and a trouble-free operation for this appliance. Please save these instructions and refer to them for cleaning and care tips.

Servicing should be performed by an authorized service facility. SAVE THESE INSTRUCTIONS SPECIAL CORD SET INSTRUCTIONS

1. A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over, a longer cord.
2. An extension cord may be purchased and used if care is exercised in its use.
3. If an extension cord is used, the marked electrical rating of the extension cord must be at as great as the electrical rating of the appliance. If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord. The resulting extended cord must be arranged so that it will not drape over a countertop or tabletop where it can be pulled on by children or tripped over accidentally.

THIS PRODUCT IS FOR HOUSEHOLD USE AND HOSPITALITY USE ONLY
The plug of this appliance is subject to usage for household or hospitality:
For household use, the appliance is equipped with 2-wire polarized type plug & SPT-2 power supplier cord. or 3-wire grounding plug with SVT power supplier cord;
While for household and hospitality use , the appliance is equipped with 3-wire grounding plug with HPN power supplier cord.

For 2-wire polarized type plug:
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not modify the plug in any way.

NOTES ON THIS OPERATING MANUAL

This operating manual cannot cover all possible circumstances. For further information or in case of problems not adequately covered in this operating manual, please contact the service and sales centre.
Please keep this operating manual safe and pass it on to the next user.

UNPACKING

• Remove your coffee brewer from its packaging
• After unpacking, please check that the following parts are included:

1. coffee brewer
2. Manual
3. Warrantee card

Note:

• Check that your home power supply voltage is the same as marked on the machine rating plate
• Destroy all the plastic bags to prevent danger to children!

Tip:
keep the packaging boxes for transporting the machine (e.g. for removals, servicing, etc.)

Note:
You may find a little water remaining in the machine.
In order to ensure that this machine works perfectly, it was tested with water before leaving the factory.

STARTING UP

Before using for the first time
Caution: improper handling of electrical equipment is dangerous and can be lethal. Please pay attention to the safety safeguards in this manual, in particular the following:

• Danger of scalding: beware of hot water & steam
• Do not operate the machine with an empty water tank or water is less than MINIMUM level.
• Hot water will be dropped during pre-heating. Do not put the hands under the water drip
• Do not open the handle when the machine is brewing.
• Always pull out the power plug before cleaning the machine
• Only use the machine ina dry room

Thoroughly rinse out the water tank with fresh water before using for the first time. Clean the k-cup coffee brewer using a damp cloth only.
WARNING
RISK OF FIRE OR ELECTRIC SHOCK DO NOT OPEN

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY

The exclamation point within an equilateral tringle is intended to alert the suer to presence of important operating and maintenance(servicing)instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock to persons

OVERVIEW OF MACHINE PARTS AND CONTROLS

HOW TO BREW

1. Place Brewer upright on a flat surface, remove all product packaging and plug into outlet.

2. Remove reservoir and reservoir lid,
   then fill with water to the MAX FILL line.

3. Replace reservoir lid and place reservoir on top Brewer.
   

4. The appliance has water level senser, if water level is lower than Min line, the brewer will not be allowed to make a new brew until refill water above the Min line, with indication of flashing light in the water level indicator.

5. Lift the handle of the brewer and insert a chosen K-Cup® pack into the k-cup pack housing, do not peel off the foil cover of the k-cup pack.
   
   CAUTION: Avoid the sharp piercing pin inside the brew head (even it will be hidden when the handle is opened)

6. Close by pressing down on top of the brew head handle
   NOTE: K-Cup® pack will be punctured when closing the brew head

7. Place a coffee cup in the dispense area on the drip tray.

NOTE: Drip Tray and Drip Tray Plate can be removed to accommodate larger travel mugs.

8. Select Brew Size by pressing the serving size button (* with a beep indicating the brew is starting).

9. The brewer starts to brew while the pressed button will be flashing during the brewing process, the brewing stops automatically when the button stops flashing after brewing time is reached ( with 2 beeps).
   The process can be stopped manually by pressing the same button ( with 2 beeps).
   Caution: before opening the lid, leave the brewer to escape steam/residual water completely for 20 seconds.

10. Your delicious coffee is ready.

11. Prior to open the brewer head, always let residual drips/steam f to escape completely.

12. Remove the used K-cup from the brewer as per the figure, keep your hands far from the hot water outlet.
    Caution: Do not open the handle when the machine is brewing, if the brewer is opened unintentionally the pump will stop the brewing with all illumination lights flashing (* with beep emitting), indicating it is danger of scalding and hot water spitting from the brewer head, close the handle immediately to its position.
    Pump always stops earlier while this does not mean the brewing process is completely, the button continues to blink for 20 seconds to let steam/residual water to escape, do not lift the handle during this steam/residual water escaping stage.

Tips:
When use the machine in first time or the machine is cold, It is suggested to make a cup of water to rinse the cup and in the mean time to help warm up the machine.
*: optional feature.
**: Optional feature.

How to change default coffee volume ( 60z- 80z-12 0z):

a. leave the machine unplugged.
b. press the small cup button and keep it pressed, in the F mean time, insert the plug into socket.
c. the middle cup button is lit steadily, which stands for the factory default setting.
d. You can press the small cup size to set the default volume at: 60z- 80z-120z for the 3 botton.
e. or Press the big cup button to set the default volume at: 80z-100z- 120z
f. After your choose, press the on/off button to memory the change, all buttons go off.
g. Turn on the brewer by pressing on/off button and the new coffee volume is programmed.

How to reset the machine. a. leave the machine unplugged.
b. press the big cup button and keep it pressed, in the mean time, insert the plug into socket.
c. The blue light of the water level gauge will flash twice, standing for the reset is completed.
d. the volume setting is 60z- 80z-12 oz for the 3 buttons.

HELPFUL HINTS

• Initial Cleansing Brew — Before you use your Brewer for the first time, perform an initial cleansing brew by running clean water through the brew cycle without using a K-Cup® pack.
• One Cup at a Time — Your new Brewer makes one fresh beverage at a time.
• The Right Water Makes a Difference — For the best tasting gourmet coffee, tea or hot cocoa, we recommend using bottled or filtered water. We do not recommend using distilled or reverse osmosis water. Water quality varies from place to place. If you notice an undesirable taste in your cup of coffee such as chlorine or other mineral taste, we recommend you consider using bottled water or water from a filtration system.
• Customize Your Flavor & Brew — With the choice of over 200 varieties of K-Cup® pack, your Brewer gives you endless options to customize the flavor and strength that’s perfect for you. For a strong, intense cup, select an Extra Bold K-Cup® pack (with up to 30% more ground coffee than regular varieties). Fill the reservoir with filtered or bottled water up to the FILL LEVEL indicator and brew normally.
• Brewing Into a Tall Mug — To brew into a tall mug, simply remove the Drip Tray Assembly and place the tall mug on the Drip Tray Base.
• The Drip Tray — Any liquid overflow (from your cup or the Cold Water Reservoir) will be caught in the Drip Tray. Be sure to empty the Drip Tray. The Drip Tray has a snug fit to ensure it stays put in transit.
• Clean Your Brewer Regularly — To keep your Brewer looking and performing its best, be sure to clean the external and internal components on a regular basis. See page 10 for more information.
• De-Scaling — Mineral content in water varies from place to place. Depending on the mineral content of the water in your area, calcium deposits or scale may build up in your Brewer. Scale is non-toxic, but left unattended, it can hinder Brewer performance.
  De-scaling your Brewer helps maintain the heating element and other internal parts of the Brewer that come in contact with water.
  Storing — When storing your Brewer, carefully empty the Drip tray and water reservoir. Store your Brewer upright in a safe, dry, frost-free environment.

CLEANING AND MAINTAINING YOUR SINGLE SERVER BREWER

Cleaning External Parts

IMPORTANT: Make sure the Brewer is unplugged before cleaning Regular cleaning of the
Brewer’s external components is recommended. Allow to Cool.

1. Never immerse the Brewer in water or other liquids. The Housing and other external components may be cleaned with a soapy, damp, non-abrasive cloth.
2. The Drip Tray can accumulate liquids. The Drip Tray and Drip Tray Plate should be periodically inspected and cleaned with a damp soapy nonabrasive lint free cloth. The Drip Tray and Drip Tray Plate should not be put into the dishwasher. To remove the Drip Tray Assembly, simply slide it toward you, keeping it level at all times to avoid spilling.

Cleaning the K-Cup® pack Holder

1. Cleaning the Parts — The K-Cup® pack Holder Assembly can be placed onto the top shelf of a dishwasher. NOTE: Use low temperature cycles in the dishwasher.
   To remove from the Brewer, lift the front face of the Brewer.

2. Cleaning the Exit Needle — The Exit Needle is located on the inside bottom of the K-Cup® pack Holder. Should a clog arise due to coffee grinds, it can be cleaned using a clean household tool. Remove K-Cup® pack Holder and detach Funnel. Insert the household tool into the Needle to loosen the clog and push it out. The K-Cup® pack Holder is dishwasher safe.

CAUTION: There are sharp needles that puncture the K-Cup® pack above the K-Cup® pack Holder and in the bottom of the K-Cup® pack Holder. To avoid risk of injury, do not put your fingers in the K-Cup® pack Assembly Housing.

Cleaning and Emptying the Reservoir

Discard the remaining water by removing the reservoir lid and turning reservoir upside down over the sink. It is recommended to empty the water reservoir between uses and use fresh water for each brew. Do not immerse appliance in water.

Storage

Empty the reservoir before storing and take care to ensure that you store your Brewer in a safe and frost free environment. It is suggested to store your Brewer in the upright position. If you store the Brewer in a cold environment, you run the risk of condensation freezing inside the Brewer and causing damage. When
you prepare to use it after storage, we recommend wiping the reservoir with a damp lint-free cloth and running three rinse brews without a K-Cup® pack.
If your Brewer has been in an environment below freezing, please be sure to let it warm to room temperature for 2 hours before using.

De-Scaling Your Brewer

Mineral content in bottled or filtered water varies. Depending on the mineral content of the water, calcium deposits or scale may build up in your Brewer. Scale is non-toxic but left unattended, it can hinder Brewer performance. Descaling your Brewer helps maintain the heating element, and other internal parts of the Brewer that come in contact with water.
The Brewer should be de-scaled every 3-6 months to ensure optimal performance or when there are white deposits in the reservoir. It is possible for calcium deposits to build up faster, making it necessary to de-scale more often.

To de-scale the Brewer:
Step 1: Make sure you have at least 8 ounces of undiluted white vinegar on hand.
You will also need a 10 oz ceramic mug (do not use a paper cup) and access to a sink.
Step 2: Fill reservoir with 8 ounces of undiluted white vinegar, place a ceramic mug on the Drip Tray Plate.
Step 3: Close the brew head and perform a brew into the ceramic mug without adding a K-Cup® pack.
Step 4: Start a brew but power off the Brewer just after it starts to dispense and then allow it to sit for at least 30 minutes.
Step 5: After the prescribed period of time, perform a brew without adding a K-Cup® pack. Empty the contents of the ceramic mug into the sink, be careful as contents may be hot.
Step 6: Fill the reservoir with 8 ounces of bottled water, close the brew head, place a cup on the Drip Tray Plate and perform a brew.
Step 7: Repeat Step 6 three times using bottled water (with no K-Cup® pack in place) to clean the Brewer plumbing and get rid of any residual taste from the vinegar. The Brewer is now ready for normal use again.

TROUBLESHOOTING YOUR SINGLE SERVER BREWER

Beyond these recommended cleaning and maintenance procedures this Brewer is not user serviceable, for service please refer to the Warranty section in this guide.

enough to brew the selected size. 3) Calcium or scale is built up in the brewer.| 1) Clean K-Cup® pack Holder if necessary and rinse under faucet 2) Make sure there is enough water in the reservoir to brew the selected serving size 3) De-scale the Brewer
Water in reservoir base|

1. The reservior is not empty before removal

| 1) Remove the water reservoir, Tum off the brewer with the on/offbutton, press the on/off button and keep it pressed for 3 seconds, the pump starts to drain the water of the base: 2) Use a dry sponge to absorb the water if any.
Coffee drops around the brewer hold when brewing|

1. Ground coffee sticked on to the Water Outlet gasket as a result the sealing is not good

| Pull off the gasket gently and rinse the gasket with water, put it back gently after rinse.
The on/off button is flashing| Temperature sensor does not work properly.| Call service line.
Water spitting from the outiet of the brewer head|

1. The brewing is stopped manually.
2. The handle or brewer head is lift while the button is flashing

| 1) Leave the brewer to escape steam/residual water completely, in 20 seconds from the brewing process is interrupted
K-cup is shrinked after brewing| Itis normal, depending on K-cup from different brand lift while the button is flashing|
Brewer does not have power| Check to be sure that it is plugged in securely.| Plug into a different outlet.
Brewer cannot brew| No water in the reservoir. The handle is lift.| Check to make sure there is water in the reservoir Close the handle, the 3 serving buttons will flash if the handle is lift.

TECHNICAL DATA:

Rated Voltage: 120V AC
Rated Frequency: 60Hz
Rated Power: 1,420W
NW/GW.: 3.1/3.5 kg appr.
Pump Pressure: ~ Max. 3 Bars
Water Tank Capacity: 450z
Right for improvements changes are reserved in the interest of technical progress.

K-Cup® pack is a product of Keurig inc, has no relationship to the manufacturer or its distributors of this brewer.

If you experience any problem with the appliance, please DO NOT return the product to the retail store or online merchant. For technical assistance and product information contact us via:
E mail: support@muellerdirect.com or Call us on: 888-632-9981 For Miieller Customer Care
The cases in the tables do not always indicate a faulty cooker.
Please, exemine cooker carefully before contacting Customer Support,

LIMITED WARRANTY

Mueller Company (the “IPC”) warrants this appliance to be free from defects in workmanship and material, under normal residential use, for a period of two (2) year from the date of purchase. This warranty extends only to the original purchaser and use in USA and Canada. A purchase receipt, purchase order number or other proof of date of original purchase is required before warranty service is performed. IPC’s obligation under this warranty is limited to replacing or repairing, or assisting in the repair at IPC’s option. All repairs for which warranty claims are made must be pre-authorized by IPC.

This appliance comes equipped with many safety features. Any attempt to interfere with their operation may result in serious injury/damages and void this warranty. No warranty service will be provided to any appliance that has been tampered with, unless directed by an IPC representative.

This warranty does not cover normal wear of parts or damage resulting from negligent use or misuse of the appliance, use contrary to the operating instructions, failure to provide reasonable and necessary maintenance, or disassembly, repair or alteration by anyone unless directed by an Instant Pot Representative. This warranty does not cover units that are used outside of US and Canada. Further, the warranty does not cover damage resulting from Acts of God, such as fire, flood, hurricanes and tornadoes. IPC is not responsible for shipping cost for warranty service.

LIMITATION AND EXCLUSIONS

To the extent permitted by applicable law, the liability of IPC, if any, for any allegedly defective appliance or part shall be limited to repair or replacement of the appliance or part and shall not exceed the purchase price of a comparable replacement appliance or part,

THE PROVISIONS OF THIS WARRANTY ARE YOUR SOLE AND EXCLUSIVE REMEDY WITH RESPECT TO THE PRODUCT(S) COVERED BY THIS WARRANTY. ALL IMPLIED WARRANTIES WITH RESPECT TO THE APPLIANCES(S) INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.

IPCis not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the appliance or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some provinces/ states do not allow the exclusion or limitation of incidental or consequential damages.
Accordingly, the above limitation may not apply to you.
You, the buyer, may have other rights and remedies under your state’s or province’s applicable laws, which are in addition to any right or remedy which may be available under this limited warranty.

If the appliance should become defective within the warranty period, please contact the Mueller support Customer Service team by:

• E mail: support@muellerdirect.com or

• Call us on: 888-632-9981 For Miieller Customer Care
  To facilitate speedy service, please provide:

  • Your name, email address or phone number
  • A copy of the original purchase receipt with order number, the model and serial number
  • Description of the product’s defect, pictures or videos if possible

All contents in this document have been checked carefully. Mieller Company reserves the right to interpret any printing mistake or misunderstanding of the content.

For any technical improvement or change in appearance or name plate, changes shall be placed in the revised manual without further notice. In case in appearance and calor, please refer to the actual product for detailed information
Stadards: UL 1026 Fifth Edition
CAN/CSA-C22.2 No. 1335.1-93 CAN/CSA-C22.2 No.1335.2.15-93

Miieller USA
515 HARAM AVE
OPA LOCKA, FL 33054
{ (888)-632-9981
support@muellerdirect.com
www.muellerdirect.com
© 2017 Miieller USA, All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>