naim UnitiLite Slimline Music System Instructions
- June 17, 2024
- naim
Table of Contents
naim UnitiLite Slimline Music System
Introduction
This supplement describes the TIDAL feature incorporated in version 4.4.00 of
the Naim Streamer product family operating firmware. The TIDAL feature enables
users to play TIDAL audio streams via a Naim streamer under the control of the
Naim App. Products included in the streamer family are: UnitiLite, UnitiQute,
UnitiQute 2, NaimUniti, NaimUniti 2, SuperUniti, NAC-N 172 XS, NAC-N 272, ND5
XS, NDX and NDS. Units running firmware versions earlier than 4.4.00 do not
include TIDAL. For information on updating streamer firmware contact your
local Naim retailer or distributor, or visit:
www.naimaudio.com/updates. TIDAL
streaming requires a TIDAL subscription. For more information visit:
www.TIDAL.com
Note : TIDAL is not available in all countries. For a list of
availability by country visit the support pages at:
https://support.tidal.com
The TIDAL function
The Naim App fully integrates TIDAL account access, browsing, and playback
control. With its TIDAL input enabled, a streamer receiving a TIDAL stream
will automatically select its TIDAL input and play the stream.
The audio program will be displayed on the streamer front panel and on the
Naim App. Playback can be controlled using the streamer remote control
handset, its front panel controls or the Naim App. To play a TIDAL stream,
open the Naim App, select the TIDAL input login to your TIDAL account, and
select the programme material.
Note: All Naim streamer products can be updated to firmware version
4.4.00, however, TIDAL can only be enabled
on those that are also 24bit/192kHz capable. These streamers are identified by
displaying 3DXXXXX in the “BC SW” line of their System Status screen (Setup >
Factory Settings > System Status).
Streamers that display 1AXXXXX, 2AXXXXX or 2DXXXXX in the BC SW line of their
System Status screen must be hardware updated to enable TIDAL with firmware
version 4.4.00. Contact your local Naim retailer or distributor for
information on streamer updates.
Configuring the TIDAL input
The TIDAL input can be configured via the streamer Setup > Inputs > TIDAL menu. The following parameters can be configured.
Parameter Options
- Enabled: Yes / No. Switches the TIDAL input on or off and displays or hides any associated menus.
- Name : Enables user-specified names to be attached to the input. Use the streamer handset or Naim App to enter text.
- Input Trim : Enables the level of the TIDAL input to be adjusted. Adjust using the handset 6 or 5 keys.
- Play Bitrate : Normal / High / HiFi. Enables the TIDAL stream data rate to be selected to suit internet connection bandwidth. Normal bitrate: 96kbps AAC format. High bitrate: 320kbps AAC format. HiFi bitrate: 16 bit 44.1kHz FLAC format.
CONTACT
Naim Audio Ltd. Southampton Road, Salisbury, England SP1 2LN
Call. +44 (0) 1722 426600
Email. info@naimaudio.com
naimaudio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>