Tone master FR-10 Powered Speakers Owner’s Manual
- June 17, 2024
- Tone master
Table of Contents
Tone master FR-10 Powered Speakers
Product Information
Specifications
- Type: Powered Speakers
- Power Amp: 1,000 watts Class D
- Maximum SPL: 130 dB
- Frequency Range: Not specified
- Frequency Response: Not specified
- Speakers:
- FR-10: One 10″ woofer, one 1″ compression driver
- FR-12: One 12″ woofer, one 1″ compression driver
Product Usage Instructions
Control Panel
The control panel is located on the front of the powered speaker.
- VOLUME: Controls the overall volume level.
- TREBLE: Active +/- 6dB center-detent tone control for fine-tuning high-end sound.
- MIDDLE: Active +/- 6dB center-detent tone control for fine-tuning midrange sound.
- BASS: Active +/- 6dB center-detent tone control for fine-tuning low-end sound.
- CUT: Controls the overall high-frequency response. Increase to reduce high frequencies sent to the FR speaker.
- POWER JEWEL: Illuminates red when the amplifier is on.
- POWER: Turns the amplifier on and off.
Note: For flat frequency response, set the TREBLE, MIDDLE, and BASS controls at the center-detent position and set the CUT control at the minimum (1) position. Adjustments made to these controls do not affect the signal sent to the external gear when using the rear-panel output.
Rear Panel
The rear panel is located on the back of the powered speaker.
- IEC INLET: Connect the included power cord to a grounded outlet by the input power voltage and frequency.
- OUTPUT: Balanced XLR line output for connection to external sound reinforcement and recording gear.
- GROUND LIFT: Engaging this button helps eliminate hum or buzz resulting from connection to improperly grounded equipment when using the OUTPUT.
- INPUT: Combination balanced XLR/1/4″ input for connection to the line level output of your amp modeller.
FAQ
- Q: What is the power output of the FR series powered speakers?
- A: The FR series powered speakers have a 1,000-watt Class D power amp.
- Q: Can I connect the FR speakers to external sound reinforcement or recording gear?
- A: Yes, the FR speakers have a balanced XLR line output (OUTPUT) for connection to external gear.
- Q: How can I eliminate hum or buzz when using the OUTPUT?
- A: Engaging the GROUND LIFT button on the rear panel helps eliminate hum or buzz resulting from connection to improperly grounded equipment.
- Q: What is the warranty for the Tone Master FR speakers?
- A: For warranty information, please visit start.fender.com or contact a Fender specialist at 1-800-856-9801 (U.S. toll-free) or 1-480-596-7195 (International).
TONE MASTER® FR-10, FR-12
- The Tone Master FR series delivers full-range, flat-response powered speakers designed for use with today’s digital guitar amp modellers and profilers. The ideal solution for players who use modellers at home or on stage, the FR series perfectly replicates every detail of your amp simulations.
- Tone Master FR speakers feature an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. Other features include a three-band active EQ and high-frequency cut control that lets players fine-tune their stage tone without altering the signal sent to the PA, and classic Fender tilt-back legs for angled speaker placement providing on-axis response even on the smallest stages. Plus, Tone Master FR-powered speakers are designed with a pure Fender look and vibe for an authentic backline look and feel.
- Register your Tone Master FR at start.fender.com for free additional software, information on firmware and product updates, special offers, warranty and service information, and much more.
CONTROL PANEL
- A. VOLUME: Controls overall volume level.
- B. TREBLE: Active +/- 6dB center-detent tone control fine-tunes high-end sound to different rooms and stages by boosting or cutting treble frequencies.
- C. MIDDLE: Active +/- 6dB centre detent tone control fine-tunes sound to different rooms and stages by boosting or cutting midrange frequencies.
- D. BASS: Active +/- 6dB centre detent tone control fine-tunes low-end sound to different rooms and stages by boosting or cutting bass frequencies.
- E. CUT: For fine-tuning overall high-frequency response. Increase this control to reduce high frequencies sent to the FR speaker.
- F. POWER JEWEL: Illuminates red when the amplifier is on.
- G. POWER: Turns the amplifier on and off.
NOTE: For flat frequency response, set TREBLE (B), MIDDLE (C) and BASS (D) controls at center-detent position and set CUT control at minimum (1) position. Adjustments made to the TREBLE, MIDDLE, BASS and CUT controls do not change the signal sent to external gear (i.e., sound reinforcement or recording equipment) when using rear-panel output (I).
REAR PANEL
- H.IEC INLET: Connect the included power cord to a grounded outlet under the input power voltage and frequency beside the inlet. Universal 100V-240V operation.
- I.OUTPUT: Balanced XLR line output for connection to external sound reinforcement and recording gear.
- J.GROUND LIFT: When using OUTPUT (I), engaging this button helps eliminate hum or buzz resulting from connection to improperly grounded equipment.
- K.INPUT: Combination balanced XLR/1/4” input for connection to the line level output of your amp modeller.
For questions and troubleshooting,
- contact a Fender specialist at:
- 1-800-856-9801 (U.S. toll-free)
- 1-480-596-7195 (International)
SPECIFICATIONS
- TYPE: PR 6029
- POWER AMP: 1,000 watts Class D
- MAXIMUM SPL: 130 dB FREQUENCY RANGE: FR-10: 58Hz – 20kHz (-10dB) FR-12: 58Hz – 20kHz (-10dB)
- FREQUENCY RESPONSE: FR-10: 75Hz – 20kHz (-3dB) FR-12: 70Hz – 20kHz (-3dB)
- SPEAKERS FR-10: One 10” woofer, one 1” compression driver FR-12: One 12” woofer, one 1” compression driver
- DIMENSIONS AND WEIGHT: FR-10: Width: 19.38” (49.2 cm) Height: 17.13” (43.5 cm) Depth: 9.63” (24.4 cm) Weight: 25.6 lbs. (12.5 kg) FR-12: Width: 23.5” (59.7 cm) Height: 18.125” (46 cm) Depth: 9.875” (25.1 cm) Weight: 27.6 lbs. (11.6 kg)
PART NUMBERS
TONE MASTER® FR-10
- 2275100000 (120V, 60Hz) NA
- 2275101000 (110V, 60Hz) TW
- 2275103000 (240V, 50Hz) AU
- 2275104000 (230V, 50Hz) UK
- 2275105000 (220V, 50Hz) ARG
- 2275106000 (230V, 50Hz) EU
- 2275107000 (100V, 50/60Hz) JP
- 2275108000 (220V, 50Hz) CN
- 2275109000 (220V, 60Hz) ROK
- 2275113000 (240V, 50Hz) MA
- 2275114000 (120V, 60Hz) MX
TONE MASTER® FR-12
- 2275200000 (120V, 60Hz) NA
- 2275201000 (110V, 60Hz) TW
- 2275203000 (240V, 50Hz) AU
- 2275204000 (230V, 50Hz) UK
- 2275205000 (220V, 50Hz) ARG
- 2275206000 (230V, 50Hz) EU
- 2275207000 (100V, 50/60Hz) JP
- 2275208000 (220V, 50Hz) CN
- 2275209000 (220V, 60Hz) ROK
- 2275213000 (240V, 50Hz) MA
- 2275214000 (120V, 60Hz) MX
CONTACT
A PRODUCT OF
- FENDER MUSICAL INSTRUMENTS CORP.
- 311 CESSNA CIRCLE CORONA, CALIF. 92880 U.S.A.
AMPLIFICADOR DE AUDIO
- IMPORTADO POR: Fender Ventas de México, S. de R.L. de C.V.
- Calle Huerta #279, Int. A. Col. El Naranjo. C.P. 22785. Ensenada, Baja California, México.
- RFC: FVM-140508-CI0
- Servicio al Cliente: 01(800) 7887395, 01(800) 7887396, 01(800) 7889433
- Fender® and Tone Master® are trademarks of FMIC.
- Other trademarks are the property of their respective owners.
- Copyright © 2023 FMIC. All rights reserved.
References
Read User Manual Online (PDF format)
Loading......