electriQ EIGH8TBVW Bathroom Towel Heater with Smart App User Manual

electric EIGH8TBVW Bathroom Towel Heater with Smart App

Product Information

Technical Specifications

• Product Name : Designer Infrared Glass Heater / Bathroom Towel Heater with Smart App
• Model Number : EIGH8TBVW
• Manufacturer : electriQ

Product Overview

The Designer Infrared Glass Heater / Bathroom Towel Heater is a stylish and efficient heating solution for your bathroom. It features a front panel with a towel rail and a control panel for easy operation. The heater can be wall- mounted using the provided brackets and screws. The towel rail can also be removed if desired.

Safety Instructions

1. Please read the manual before using this heater.
2. Keep the manual safe for future reference.
3. Visit our website www.electriQ.co.uk for our entire product range.

Installation

To install the heater, follow these steps:

1. Using an 8mm drill bit, drill 2 holes on the wall using the spacings of the heater bracket as a guide.
2. Use a spirit level to ensure the holes are level.
3. Insert wall plugs into the holes and then fix the brackets onto the wall with the provided screws.
4. Confirm that the brackets are correctly positioned and secure.
5. Hook the heater onto the brackets.

Operation

To operate the heater, use the control panel:

• Turn on the power switch on the side of the unit.
• Use the Standby button to turn the unit on and off.
• Change between Low and High heat settings.
• Change the temperature within a range of 5-40°C.
• Use the inbuilt timer to set the unit to turn off after a set period of time.
• Hold the Child Lock button for 5 seconds to lock the control panel. In child lock mode, all other buttons are deactivated.

Setting Up the App

To connect the heater to the app, follow these steps:

1. Download the TUYA SMART app from your app store using the provided QR codes or by searching for the app.
2. Ensure your device is connected to the correct WiFi network.
3. Turn on the WiFi on the heater by pressing and holding the POWER button for 6 seconds until the heater beeps. The WiFi symbol will flash quickly to indicate quick connection mode.
4. Follow the instructions in the app to connect the heater to your WiFi network.

Using the App

Once connected, you can use the app to control and monitor the heater remotely. The app allows you to adjust heat settings, temperature, and timer settings. You can also view energy usage and set schedules for automatic operation.

Cleaning and Maintenance

To clean the heater, switch off the power and unplug it from the wall. Use a soft cloth dampened with water or a mild cleaning solution to wipe the surface of the heater. Do not use abrasive cleaners or solvents, as they may damage the glass surface.

Troubleshooting

If you experience any issues with the heater, refer to the troubleshooting section in the manual or contact our support team for assistance.

FAQ

• Q: How do I remove the towel rail?
  • A : To remove the towel rail, unfasten the two nuts holding it in place on the rear of the heater. Then, push the bolt through the back of the rail to slide it up and off the heater. Refasten the bolt in position, ensuring it is not over tightened to prevent damage to the glass.
• Q: Can I use the timer multiple times?
  • A : No, the timer is a one-use timer that starts operation when programmed. If you press the POWER button before the time has elapsed, the timer will be cancelled and the unit will turn off.

SAFETY INSTRUCTIONS

IMPORTANT

• Carefully read the instructions before operating the unit

• This appliance is for indoor use only.

• Rating : This unit must be only connected to a 220-240 V / 50 Hz earthed outlet.

• Installation must be in accordance with the regulations of the country where the unit is used.

• If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician.

• This heater has been tested and is safe to use. However, as with any electrical appliance – use it with care.

• Disconnect the power from the unit before dismantling, assembling or cleaning.

• Avoid touching any moving parts within the appliance.

• Never insert fingers, pencils or any other objects through the guard.

• This appliance can be used by Children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be carried out by children.

• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate, or clean the appliance or perform user maintenance.

• Children under 3 years should be kept away unless continuously supervised.

• Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

• Do not clean the unit by spraying it or immersing it in water.

• Never connect the unit to an electrical outlet using an extension cord. If an outlet is not available, one should be installed by a qualified electrician.

• Never operate this appliance if the unit, cord or plug is damaged. Ensure the power cord is not stretched, exposed to sharp objects/edges, or routed under the unit.

• Any service other than regular cleaning should be performed by an authorized service representative. Failure to comply could result in a voided warranty.

• Never use the plug as a switch to start and turn off the heater. Use the provided power switch on the rear of the unit.

• Do not use an external timer.

• Do not cover the air inlet or outlet, or place items close to the unit which may restrict airflow, as this may present a fire risk.

• The heater must not be located immediately below a socket outlet.

• Always ensure the unit is secure before operation. Do not use on unstable or uneven surfaces and if wall-mounted, it must be securely attached to a suitable wall.

• Do not move or tilt the unit.

• Avoid keeping the unit in direct sunlight for a long period of time.

• The heater is designed to be used at temperatures above -20°C. If it is exposed to temperatures below this, it must be allowed to warm above this level before operation.

• Do not attempt to repair, disassemble or modify the appliance. This unit contains no user-serviceable parts.

• Always unplug or disconnect the appliance from the mains power supply when not in use, or when moving or cleaning it. Do not pull the cord to unplug the heater.

• Keep the heater clean. Do not allow any object to enter the ventilation or exhaust opening as this may cause electric shock, fire, or damage to the heater.

• Do not use the appliance for anything other than its intended use. It is designed for domestic indoor use only.

• There may be a trace of odour during the first few minutes of initial use, or after a period of storage. This is normal and will quickly disappear.

• This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or any flammable liquids are used or stored.

• Never locate this appliance where it may fall into a bathtub or otherwise become exposed to water.

• This appliance is IP24 rated, and so can be used or installed within a bathroom as long as the appliance and its cables are not within Zones 0-2.

• If used within a bathroom, the circuit must be protected by a suitable RCD to prevent electric shock.

• Do not allow the appliance to be submerged or sprayed with water.

• If the unit is wall-mounted, it must be installed in accordance with current regulations for the area of installation. If unsure, professional advice should be sought.

• WARNING : To reduce the risk of fire or electrical shock, DO NOT use this appliance with any solid-state Speed Control Device or any variable speed controllers.
  ENERGY SAVING AND UNIT SAFETY PROTECTION TIP

• Do not cover or restrict the airflow. Do not use in a dusty environment.

PRODUCT OVERVIEW

WALL MOUNTING
Using an 8mm drill bit, drill 2 holes using the spacings of the heater bracket as a guide. Use a sprit level to ensure they are level.

Insert wall plugs into the holes and then fix the brackets onto the wall with the screws provided.
Once you have confirmed that the brackets are correctly positioned and secure, hook the heater onto them.

REMOVING THE TOWEL RAIL
The towel rail can be removed by unfastening the two nuts holding it in place on the rear of the heater. Then push the bolt through the back of the rail, this will allow the rail to slide up and off the heater. Refasten the bolt in position, ensuring it is not over tightened, to prevent damage to the glass.

CONTROL PANEL

DISPLAY

Power| Turn on the power switch on the side of the unit. Use the Standby button to turn the unit on and off.
---|---
Heat Settings| Change between Low and High heat.
Temperature Up/Down| Change the temperature within a range of 5-40⁰C.
Timer| The inbuilt timer will allow you to set the unit to turn off after a set period of time. Please note this timer is a one-use timer, and starts operation when programmed.

1.    While the unit is operating, repeatedly press the timer button to set the duration

2.    Once the set time has elapsed, the unit will turn off automatically.

Press the POWER button before the time has elapsed, the timer will be cancelled and the unit will turn off.

Child Lock| Hold the Child Lock button for 5 seconds to lock the control panel, when the unit is in child lock mode, all other buttons are deactivated. A lock symbol will appear on the screen. To exit child

lock, press and hold the button again for 5 seconds.

CONNECTING THE APPLIANCE TO WIFI
DOWNLOAD THE APP TO YOUR PHONE

MODES AVAILABLE FOR SETUP
The heater has two different setup modes, Quick Connection and AP (Access Point). The quick connection is a quick and simple way to set the unit up. The AP connection uses a direct local WiFi connection between your phone and the heater to upload the network details.
To turn the WiFi on press and hold the POWER button for 6 seconds until the heater bleeps. The WiFi symbol will flash quickly to indicate the unit is in quick connection mode
Please ensure your device is in the correct WiFi connection mode for the connection type you are attempting, the flashing WiFi indicator on your heater will indicate this.

Download the” TUYA SMART” app, from your chosen app store, using the QR codes below, or by searching for the app in your chosen store.

CHANGING BETWEEN CONNECTION TYPES
If the connection has failed then needs to change to slowly flash state. When the WIFI indicator is flashing at speed, press and hold the POWER button again for 6 seconds and the WIFI indicator will begin to slowly flash.

REGISTER THE APP

SETTING UP YOUR HOME WITHIN THE APP
TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses as such during the setup process, the app requires that different areas are created and named to allow easy management of all your devices. When new devices are added, they are assigned to one of the rooms you have created.
CREATING ROOMS

CONNECTING USING THE QUICK CONNECTION METHOD
Before initiating the connection, make sure the WiFi indicator is flashing twice per second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup)

CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the WiFi Indicator flashing once per second. If not follow the instructions for changing the WiFi connection mode. Also ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup)

This will then transfer the settings to the heater.
Once the connection process has been completed, go back to the network settings on your phone to ensure your phone has reconnected to your WiFi router.

CONTROLLING YOUR APPLIANCE THROUGH THE APP THE HOME SCREEN
NOTE : Due to the continuous development of the app, the layout and available features may be subject to change.
Each device has its own entry on the home screen to allow the user to either quickly turn the unit on or off, or to enter the device screen to make other changes.

DEVICE SCREEN

The device screen is the main control screen for the heater, providing access to the controls to amend the functions and settings.

SMART SCENES
Smart Scene is a powerful tool providing the option to customize the operation of the air heater based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation.
SCENE
Scene allows for a one-touch button to be added to the Home Screen. The button can be used to change a number of settings in one go, and can change all the settings within the unit. A number of scenes can easily be setup, allowing the user to easily change between a number of preset configurations.
Below is an example of how to set up a scene:

AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by the Time, and a range of other influences, depending on what other TUYA-enabled devices you have on the network.

PROFILE TAB

CONNECTION TROUBLESHOOTING

1. Check whether the device is powered on and is in the correct WiFi connection mode, if not please refer to the CHANGING BETWEEN CONNECTION MODES section.
2. Ensure the WiFi password has been entered into the app correctly (Case sensitive)
3. Check that the phone is connected to the WiFi you are connecting the device to.
4. Ensure the network you are connecting it to is 2.4 GHz (5 GHz WiFi networks are not supported), and that there is a strong WiFi signal to the item.
5. If your router is dual band, ensure that the 2.4 GHz network has a different network name (SSID). Further advice on changing router settings will be available from your Internet service provider / Router manufacturer.
6. Check the settings on the router. Encryption should be WPA2-PSK and the authorization type should be set to AES
7. Try using the alternative connection method. i.e. If the connection is failing when attempting to connect through CF mode, try AP mode.

CLEANING AND MAINTENANCE

ATTENTION : Please shut off the unit and unplug from the mains before cleaning or performing any maintenance.
CLEANING THE SURFACE

• Clean the heater with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage. Make sure no water enters the control panel or gaps in the casing.
• Do not run the unit until completely dry.
• Place the heater in its original box or cover to protect it from dust when not in use.
• Store it in a cool dry place.

TROUBLESHOOTING
Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate the warranty and may cause bodily harm.

2.  There is no power from socket

3.  The power switch on the rear of the unit is turned off.

| 1.  Connect the power cord

2.  Check socket is turned on

3.   Ensure the power switch on the rear of the unit is in the on position

Odour emission from unit| 1. New unit. When the unit is used for the first time the fan motor may produce and odor which will dissipate within a week of use| 1. No action required
Strong vibrations and noise| 1.  Unit is not placed on a flat surface

2.  Unit may be damaged

| 1.  Place on a flat surface. May put an anti-vibration mat underneath

2.    If the heater is damaged discontinue use and contact the service centre.

If the above solutions do not resolve the problem please contact the service centre.

TECHNICAL DATA

electriQ UK SUPPORT

www.electriQ.co.uk/support
Please, for your own convenience, make these simple checks before calling the service line.
If the unit still fails to operate call : 0871 620 1057 or complete the online form

1. Is the unit plugged into the mains?
2. Is the fuse OK?
3. Switch the unit off and wait three minutes to see if the issue is resolved. Restart the unit.
4. Office hours : 9 AM – 5 PM Monday to Friday
   • www.electriQ.co.uk
   • Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA

DECLARATION OF CONFORMITY
Hereby, electriQ declares that this heater follows Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address:
https://www.electriQ.co.uk/content/declaration-of-conformity
Disposal : Do not dispose of this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary.
Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centers.

Model Identifier: EIGH8TBVW

Item| Symbol| Value| Unit| | Item| Unit
Heat Output| | Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output| Phnom| 0.85| kW| | manual heat charge control, with integrated thermostat| No
Minimal heat output| Pmin| N/A| kW| | Manual heat charge control with room and/or outdoor temperature feedback| No
Maximum continuous heat output| Pmax| 0.85| kW| | electronic heat charge control with room and/or outdoor temperature feedback| No
Auxiliary electricity consumption| | fan-assisted heat output| No
At nominal heat output| max| N/A| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| Amin| N/A| kW| | single-stage heat output and no room temperature control| No
In standby mode| else| 0.5| W| | two or more manual stages, no room temperature control| No
| | | | | with mechanical thermostat room temperature control| No
| | | | | with electronic room temperature control| No
| | | | | with electronic room temperature control plus a day timer| No
| | | | | with electronic room temperature control plus a timer| Yes
| | | | | Other control options (multiple selections possible)
| | | | | room temperature control with presence detection| No
| | | | | room temperature control, with open window detection| No
| | | | | with a distance control option| Yes
| | | | | with adaptive start control| No
| | | | | with working time limitation| No
| | | | | with a black bulb sensor| No
Contact Details| electric, Unit J6, Lowfields Business Park, Lowfields Way, Elland, West Yorkshire, HX5 9DA

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>