Arofa SF0502BN 10 Inch Shower System Installation Guide

Arofa SF0502BN 10 Inch Shower System

For installation help, missing or replacement parts: customersupport@arofa- faucet.com
For installation video: arofa-faucet.com/video
For warranty, please activate your 5 YEARS warranty via: arofa- faucet.com

Packing list

Notice:

1. Please check whether the quantity of items is by the description
2. Choking hazard. Please keep all small parts and plastic bags out of the reach of children.

Before installation

1. We suggest that the shower set be installed by a professional plumber. Arofa will not be responsible for any damage and malfunction caused by incorrect installation.
2. Flush the water pipes before installation. Ensure that all impurities and sludge are removed to avoid clogging.
3. Pay attention to connecting cold and hot water. Facing the front of the faucet, the hot water is on the left and the cold water is on the right.
4. Please don’t disassemble and assemble the main part of the faucet by yourself, so as not to affect the performance.
5. The design and performance of products may be changed without prior notice.

You may need

Dimension for grooving

Please make sure of the shower valve size for grooving before installation.

Installation step

1. Determine the position of the shower valve with a pen. Drill 4 holes and drive the rubber particles into the wall. Then fixed the shower valve into the wall with screws and washers.
2. Connect the water pipes to the shower valve with teflon tape. The left side is hot and the right side is cold.
3. Take off the protective cover to install the handle and handwheel. Then check all the connectors for leaks and test the water to make sure it can switch correctly between the rain shower and handheld.
4. If the water test is passed, remove the handle and handwheel. Screw the protective cover back to the shower valve before tiling to prevent damage.
5. After tiling, remove the protective cover from the shower valve and install the cover plate, handle and handwheel.
6. Put the square plate into the shower arm. Then connect the shower arm to your supply hose with teflon tape, and screw the rain shower head to the arm.
7. Install the bracket with teflon tape and the square plate as shown. Connect the hose to both the handheld shower head and the bracket correctly.
8. Check the leakage at all the connections. Retighten if necessary. It is a two-function shower faucet, the top is a rainfall shower. Turning the handwheel can switch to a handheld shower.

Maintenance Suggestions

To keep the surface of the faucet smooth and bright, please clean it regularly.

• Use clean water and a cloth to remove dirt from the surface as far as possible.
• Do not use nylon brushes or detergents containing coarse particles such as decontamination powder or polishing powder to avoid wear and tear of the product.
• Because acid detergent can erode the coating, it should not be used. But mild liquid cleaners can be used.
• After cleaning, please remove all detergents with clean water and dry with soft cotton cloth.
• Please do not pull the shower tube hard when using it to avoid the hose cracking.

5-Years Warranty

1. Arofa will provide the necessary parts to restore the product to good use if there is leakage or dripping, etc. customersupport@arofa-faucet.com
2. The warranty takes effect from the purchase date. It is valid only for consumers and purchasers from our Amazon store Easyhomei. arofa-faucet.com
3. The following conditions are not covered by the warranty:
   • Product damage caused by installation errors, improper use and maintenance.
   • Failure and damage caused by self-disassembly and self-repair of the product.
   • Product is not sold by our Amazon store Easyhomei.

Arofa products are known for their outstanding quality and customer service, and earn a great reputation on the market. To learn more about Arofa products, please scan the QR code.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>