OasisSpace OS-28HFK-RW-9213-B 2 in 1 Rollator Walker with Footrest Transport Walker Chair User Manual
- June 17, 2024
- OasisSpace
Table of Contents
User Manual
Product：Aluminum Rollator
Model：OS-28HFK-RW-9213-B
OS-28HFK-RW-9213-B 2 in 1 Rollator Walker with Footrest Transport Walker
Chair
First of all, thank you very much for choosing OasisSpace products, please
read the instructions carefully before assembling.
The product structure diagram is as follows:
1. Cup holder
2.Handgrip
3.Right rear leg tube
4.Left rear leg tube
5.Triangle Knob
6.Cane holder
7.Knob| 8.Left front wheel
9.Left footrest
10.Right footrest
11.Right front wheel
12.Shopping bag
13.Main Frame
---|---
Firstly, Preparation before assembly: After unpacking the packing box, first use scissors to remove the plastic ties and the packed bubble bag. Please take care to protect all the parts in the box. If assembling on the ground, lay paper on the ground first. Or carpet to prevent scratches, pay attention to distinguish the parts and components, and then remove the inner carton to take out the parts and place them first. There are bulk accessories in the packaging box as shown in Figure 1:
1.Cup holder
2.Handgrip
3.Right rear leg tube
4.Left rear leg tube
5.Triangle Knob
6.Cane holder
7.Knob| 8.Left front wheel
9.Left footrest
10.Right footrest
11.Right front wheel
12.Shopping bag
13.Main Frame
---|---
Secondly, Assembly instructions: (please refer to the part number and name in
Figure 1 for asse mbly):
Step one :(As pic2 showed）Put the 2 armrest tube on the 13 main frame; put 3
the right rear wheel tube and 4 the left rear wheel tube on the 13 main frame
and fix it with 5 triangle knob.
Put 8 The left front wheel and 11 The right front wheel respectively on the 13
Main frame and fix them.
Pic2
Step 2: (As pic3 showed）Put 9 left pedal and 10 pedal right on 13 main frame, fix with 7 plum knob; fix 6 umbrella frame on 13 main frame; then fix 1 cup holder On the 2 armrest tube; finally fix the 12 hanging bag on the 13 main frame.
Pic3
Thirdly, check after installation:
- Whether the four-wheeler is installed correctly, please refer to the manual diagram for comparison.
- Verify that all parts of the four-wheeler are fully assembled, and you can check for extra parts.
- Check whether there is any looseness in the installation of the four-wheeler. If there is any looseness, tighten the screws and nuts.
- Check the appearance of all components of the four-wheeler for skew, and make appropriate adjustments.
- Check whether the four-wheeler brakes are normal, whether the folding is smooth, and whether the steering is smooth.
Fourth, product maintenance and maintenance methods:
- Do not scratch or scrape the surface of the product with hard objects to prevent material damage.
- For daily cleaning and maintenance, apply neutral synthetic detergent, wipe with a damp cloth, and then wipe with a dry cloth.
- Do not contact with strong acids and alkalis to prevent corrosion.
Fifth. Storage conditions and methods
After packaging, the four-wheeler should be stored at a temperature not
exceeding -10 ℃ to 40 ℃, and a relative humidity not exceeding 80%. No
corrosive gas and well ventilated, clean room. Keep away from moisture, light
and heat during transportation.
Oasis Space Brand Products: