Blue Sun GBP0LL3X-LE GameBall Thumb User Manual
- June 17, 2024
- Blue Sun
Table of Contents
GameBall Thumb
User Manual
GBP0LL3X-LE GameBall Thumb
To get the most out of GameBall, we highly recommend you watch our “GameBall Thumb Getting Started” video on our YouTube channel: https://www.youtube.com/c/GameBallTrackball
Compatibility:
- Windows 8 or later
- Mac OS X versions 10.10 or later
- Popular Linux distributions
- Chrome OS
- Android 5 or later
Specifications:
- Pixart PMW3325 Sensor
- Wireless 2.4Ghz
- 900mA Lithium battery
- Kailh GM2.0 20 million+ switches
- 1.8m detachable braided cable
- 1000hz polling rate
- Weight 190g / 6.7oz
- Wireless distance 10m / 32ft
Model numbers:
GBP0LL3X-LE
GBP0LL3X-SE
Wired Connection
To get started with your GameBall simply plug in the cable to an open USB port and you are ready to go. No special driver needed.
Wireless Connection
Step 1 – Turn on your GameBall
Step 2 – Plug in the wireless receiver into an open USB port.
Your GameBall will connect automatically and you are ready to go!
GameBall Functions
DPI Settings
To adjust the native sensitivity level click the DPI Settings button. Light
Indicator will change color to show each level.
DPI = Dots Per Inch (cursor sensitivity).
Red| 300 DPI – Slowest
Green| 600 DPI – Default
Light Blue| 1200 DPI
Blue| 2000 DPI
Orange| 3000 DPI
Purple| 5000 DPI – Fastest
Precision Mode: A single click of the Precision Button will reduce the
sensitivity to 300 DPI. Click again to return to normal.
RGB Settings
To cycle through the RGB (Red Green Blue) color light settings click the RGB Settings button. To turn off your RGB lights press and hold the same button for 3 seconds.
Charging
When your battery is low the Charge Indicator light will start to flash red. To charge your GameBall Thumb plug in the cable into your computer. The Charge Indicator light will continue to blink red while charging. The light will change to green when fully charged. Charging usually takes 1 to 1.5 hours. A full charge will last a typical user 1 month before recharging is needed. This will vary based on usage.
Angled Base
Your GameBall Thumb includes a built-in adjustable base. This base can be adjusted to provide an additional 20 degrees of angle. This can offer improved forearm posture and wrist comfort.
Support
Common Troubleshooting Steps
- Unplug, then replug your GameBall
- Try both Wired and Wireless modes
- Reboot your computer
- Test your GameBall on another USB port or computer
- Update your system drivers
- Check your system’s mouse sensitivity settings
- Remove the ball and clean the area around the bearings of dirt and debris
Please visit our support page on our website at
www.gamingtrackball.com for additional
assistance.
You can email us directly at:
support@gamingtrackball.com
GameBall is a product of Blue Sun Innovations LLC. 500 North Rainbow
Blvd. Suite 300A, Las Vegas, NV 89107
contact@bluesuninnovations.com.
©2023 all rights reserved. All product names and brands are the property of
their respective owners.
Warranty – The GameBall warranty covers defects in material and workmanship under normal use and service for one year from the original date of purchase. Blue Sun Innovations, at its option, shall repair or replace the defective unit covered by this warranty. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser and the country in which the product was purchased. This Limited Warranty does not cover: normal wear and tear, cosmetic damage or abnormalities, this includes (without limitation), scratches, color fading, dents and chips; damage caused from any unacceptable use or care of the product, including (without limitation) misuse, abuse, negligence, or any unauthorized modification, or upgrade; damage from external causes, including (without limitation), accidents, acts of God, liquid contact, fire or earthquake.
Limits of Liability – Blue Sun Innovations shall not be liable for any special, incidental or consequential damages, including, but not limited to loss of data, lost revenues, lost profits, loss of software, downtime, damage to property, and third-party claims, arising out of any theory of recovery, including warranty, contract, statutory or tort. Repair or replacement of this product, as provided herein, is the exclusive remedy. In no event will Blue Sun Innovations’ entire liability exceed the purchase price of this product.
Maintenance & Safety – Once a month, or more based on use, you should remove the ball and clean the three support bearings of dirt and debris using a dry cloth or cotton swab. To remove the ball, use the eraser end of a pencil and push up from the bottom. The exterior can be cleaned with a damp cloth. Do not use soap, harsh cleaning agents, grease or oils with GameBall. Keep GameBall away from liquid, high humidity and moisture. Operate GameBall within the specific temperate range of 0°C (32°F) to 40°C (104°F). Do not attempt to disassemble and service the device yourself. Take breaks from long play sessions, and follow standard ergonomic best practices while using GameBall.
GameBall was tested and complies with the following electronic, health, safety, and disposal standards:
Made in China
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>