HUAWEI CLT-L29 Smart Phone User Guide
- June 17, 2024
- Huawei
Table of Contents
- Your Device at a Glance
- Getting Started
- Dual Card Dual Standby Single Pass (dual-SIM devices only)
- For More Information
- Safety Information
- Disposal and recycling information
- EU regulatory conformance
- Frequency Bands and Power
- Accessories and Software Information
- FCC Regulatory Compliance
- FCC statement
- Legal Notice
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Quick Start Guide
CLT-L09
CLT-L29
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Your Device at a Glance
Before you start, let’s take a look at your new device.
- To power on your device, press and hold the power button until the screen turns on.
- To power off your device, press and hold the power button, and then touch .
- To restart your device, press and hold the power button, and then touch
1 | Secondary microphone | 2 | Laser sensor |
---|---|---|---|
3 | Rear camera | 4 | Flash / Color temperature sensor |
5 | Earpiece | 6 | Card slot |
7 | Primary microphone | 8 | USB-C port / Headset jack |
9 | Speaker | 10 | Fingerprint scanner |
11 | Power button | 12 | Volume button |
13 | Ambient light sensor / Optical proximity sensor | 14 | Front camera |
15 | Status indicator | 16 | Infrared sensor |
Getting Started
- Do not insert or remove the SIM card when your device is powered on.
- Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.
- Be careful not to scratch your device or hurt yourself when using the eject pin.
- Store the eject pin out of the reach of children to prevent accidental swallowing or injury.
- **** Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).
- If your SIM card does not match your device, please contact your carrier.
Follow the instructions in the following figures to set up your device. Please
use the eject pin included.
Single-SIM: Dual-SIM:
Dual Card Dual Standby Single Pass (dual-SIM devices only)
Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.
- When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to “The subscriber you dialed is out of the service area” or “The subscriber you dialed cannot be connected for the moment, please try again later.” The actual message will vary by service provider.
- When you are using SIM card 1’s data service, SIM card 2’s data service will be disabled.
Your device’s single pass feature helps reduce power consumption and increase
your device’s standby time. It is not related to your service provider’s
network conditions.
You can go to Settings > Wireless & networks > Dual SIM settings, and enable
Enable call forwarding between SIMs to avoid the conflicts mentioned above.
For More Information
If you encounter any problems while using your device, you can obtain help from the following resources:
- Go to Tips for function details and usage tips.
- Visit http://consumer.huawei.com/en to view device information, frequently asked questions and other information.
- Visit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region.
- You can find service hotlines, retailer addresses, service policies and more information for your local region in HiCare.
Go to Settings and touch System > About phone > Legal to view legal
information for your product.
Go to Settings and touch System > About phone > Legal > Safety information to
view safety information for your product.
Go to Settings and touch System > About phone > Authentication info to view
regulatory information for your product.
Go to Settings and touch System > Certification logos to view more information
on certification logos for your product.
All pictures and illustrations in this guide, including but not limited to
the product color, size, and display content, are for your reference only. The
actual product may vary. Nothing in this guide constitutes a warranty of any
kind, express or implied.
Safety Information
Please read all of the safety information carefully before using your device
to ensure its safe and proper operation and to learn how to dispose of your
device properly.
Operation and safety
To prevent possible hearing damage, do not listen at high volume levels for long periods.
- Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
- Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.
- Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
- Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
- Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
- While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.
- To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields.
- When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.
- Unplug the charger from electrical outlets and the device when not in use.
- Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
- Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
- Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device.
- Adhere to any rules or regulations set forth by hospitals and health care facilities.
Potentially Explosive Atmosphere
Power off your device in any area with a potentially explosive atmosphere, and
comply with all signs and instructions. Areas that may have potentially
explosive atmospheres include the areas where you would normally be advised to
turn off your vehicle engine. Triggering of sparks in such areas could cause
an explosion or a fire, resulting in bodily injuries or even deaths. Do not
power on your device at refueling points such as service stations. Comply with
restrictions on the use of radio equipment in fuel depots, storage, and
distribution areas, and chemical plants. In addition, adhere to restrictions
in areas where blasting operations are in progress. Before using the device,
watch out for areas that have potentially explosive atmospheres that are
often, but not always, clearly marked. Such locations include areas below the
deck on boats, chemical transfer or storage facilities, and areas where the
air contains chemicals or particles such as grain, dust, or metal powders. Ask
the manufacturers of vehicles using liquefied petroleum gas (such as propane
or butane) whether this device can be safely used in their vicinity.
Disposal and recycling information
**** The crossed-out wheeled-bin symbol on your product, battery, literature
or packaging reminds you that all electronic products and batteries must be
taken to separate waste collection points at the end of their working lives;
they must not be disposed of in the normal waste stream with household
garbage. It is the responsibility of the user to dispose of the equipment
using a designated collection point or service for separate recycling of waste
electrical and electronic equipment (WEEE) and batteries according to local
laws.
Proper collection and recycling of your equipment helps ensure electrical and
electronic equipment (EEE) waste is recycled in a manner that conserves
valuable materials and protects human health and the environment, improper
handling, accidental breakage, damage, and/or improper recycling at the end of
its life may be harmful for health and environment. For more nformation about
where and how to drop off your EEE waste, please contact your local
authorities, retailer or household waste disposal service or visit the website
http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories are compliant with local applicable
rules on the restriction of the use of certain hazardous substances in
electrical and electronic equipment, such as EU REACH, RoHS and Batteries
(where included) regulations. For declarations of conformity about REACH and
RoHS, please visit our web site http://consumer.huawei.com/ certification.
EU regulatory conformance
Body worn operation
The device complies with RF specifications when used near your ear or at a
distance of 0.50 cm from your body. Ensure that the device accessories, such
as a device case and device holster, are not composed of metal components.
Keep the device away from your body to meet the distance requirement.
The highest SAR value reported for this device type when tested at the ear is
CLT-L09 | 0.73 W/kg |
---|---|
CLT-L29 | 0.73 W/kg |
And when properly worn on the body is
CLT-L09 | 1.22 W/kg |
---|---|
CLT-L29 | 1.22 W/kg |
Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and 2011/65/ EU.
The most recent and valid version of the DoC (Declaration of Conformity) can
be viewed at http://consumer.huawei.com/ certification.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a
radius of 20 km from the centre of Ny-Ålesund.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that
this radio equipment will be subject to some restrictions when placed on the
market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK),
Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France
(FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT),
Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT),
Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),
Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO),
Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when
operating in the 5150 to 5350 MHz frequency range.
Frequency Bands and Power
(a) Frequency bands in which the radio equipment operates: Some bands may not
be available in all countries or all areas. Please contact the local carrier
for more details.
(b) Maximum radio-frequency power transmitted in the frequency bands in which
the radio equipment operates: The maximum power for all bands is less than the
highest limit value specified in the related Harmonized Standard.
The frequency bands and transmitting power (radiated and/or conducted) nominal
limits applicable to this radio equipment are as follows:
CLT-L09| GSM900:37dBm, GSM1800:34dBm, WCDMA900/2100:25.7dBm, LTE Band
1/3/7/8/20/28/34/38/40: 25.7dBm, Wi-Fi 2.4G: 20dBm, Bluetooth: 20dBm, Wi-Fi
5G:
5150-5350MHz: 23dBm, 5470-5725MHz: 30dBm,NFC: 60 dBuA/m at 10m
---|---
CLT-L29| GSM900:37dBm, GSM1800:34dBm, WCDMA900/2100:25.7dBm, LTE Band
1/3/7/8/20/28/34/38/40: 25.7dBm, Wi-Fi 2.4G: 20dBm, Bluetooth: 20dBm, Wi-Fi
5G:
5150-5350MHz: 23dBm, 5470-5725MHz: 30dBm,NFC: 60 dBuA/m at 10m
Accessories and Software Information
Some accessories are optional in certain countries or regions.
Optional accessories can be purchased from a licensed vendor as required. The
following accessories are recommended:
Adapters: HW-050450X00 (X represents the different plug types used, which can
be either C, U, J, E, B, A, I, R, Z or K, depending on your region)
Batteries: HB436486ECW
Earphones: MEND1632B729000,1331-3301-6001TC-296,WINDY-C,L99EP003-CS-H
The product software version is CLT-L09: CLT-L09 8.1.0.71(SP9C900) / CLT-L29:
CLT-L29 8.1.0.71(SP9C900).
Software updates will be released by the manufacturer to fix bugs or enhance
functions after the product has been released.
All software versions released by the manufacturer have been verified and are
still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not
accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see the
DoC (Declaration of Conformity) at http://consumer.huawei.com/certification.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used near your ear or at a
distance of 1.50 cm from your body. Ensure that the device accessories, such
as a device case and device holster, are not composed of metal components.
Keep the device away from your body to meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio
waves established by the Federal Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported to the FCC for this device type complies with
this limit.
The highest SAR value reported to the FCC for this device type when using it
at the ear is
CLT-L09 | 1.03 W/kg |
---|---|
CLT-L29 | 1.03 W/kg |
And when properly worn on the body is
CLT-L09 | 0.61 W/kg |
---|---|
CLT-L29 | 0.61 W/kg |
And when using the Wi-Fi hotspot function is
CLT-L09 | 0.91 W/kg |
---|---|
CLT-L29 | 0.91 W/kg |
FCC statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not expressly
approved by Huawei Technologies Co., Ltd. for compliance could void the user’s
authority to operate the equipment.
Legal Notice
Trademarks and Permissions
HUAWEI and are trademarks or registered trademarks of Huawei Technologies Co.,
Ltd. Android™ is a trademark of Google Inc. LTE is a trademark of ETSI.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd.
is under license.
Wi-Fi® , the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi
Alliance.
Privacy Policy
To better understand how we protect your personal information, please see the
privacy policy at http://consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd.
2018. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY
KIND OF WARRANTIES.
References
- Certification | Legal | HUAWEI Global
- HUAWEI Česko
- Podpora - HUAWEI Consumer Czech-HUAWEI oficiální stránky
- HUAWEI Denmark
- Kundeservice-HUAWEI Officiel hjemmeside for forbrugere | HUAWEI Denmark
- HUAWEI Global
- HUAWEI Global
- HUAWEI Support - Official Consumer Site
- Huawei Magyarország
- Támogatás- HUAWEI Fogyasztói üzletág- HUAWEI hivatalos oldal
- HUAWEI Polska
- Pomoc techniczna - Oficjalna strona dla klientów HUAWEI | HUAWEI Polska
- banner
- Manual-Hub.com - Free PDF manuals!
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>