HUAWEI P10 Lite Smart Phone User Guide

: June 17, 2024
: Huawei

Table of Contents

HUAWEI P10 Lite Smart Phone
Product Information
Product Usage Instructions
For more information
Your phone at a glance
Getting started
Safety Information
FCC Regulatory Compliance
FCC statement
Industry Canada compliance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUAWEI P10 Lite Smart Phone

HUAWEI-P10-Lite-Smart-Phone-PRODUCT

Product Information

Specifications:

Camera: Front camera with flash
Light sensor
Headset jack
Fingerprint scanner
Status indicator
Earpiece
Volume button
Power button
Microphone
Micro USB port
Speaker

Product Usage Instructions

Phone Setup:
Before starting, let’s take a look at your new phone. Press and hold the power button until your phone vibrates and the screen turns on. To forcibly restart your phone, press and hold the power button until your phone vibrates.

SIM Card Installation:
Please exercise caution when using the SIM ejector pin to avoid hurting your fingers or damaging your phone. Insert the SIM card into the correct card slot to ensure that it can be recognized by the phone. Note that the upper card slot may not support nano-SIM cards and can only accommodate a microSD card.

Safety Information:
Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.

Viewing Safety and Regulatory Information:

To view safety information, go to Settings > About phone > Legal information > Safety information.
To view regulatory information, go to Settings > About phone > Authentication info.
To view certification logos, go to Settings > About phone > Certification logos.

Operation and Safety Tips:

Avoid using the device at high volume levels for long periods.
Use only the provided adapter, charger, or battery to prevent damage or hazards.
Maintain a minimum distance of 15 cm between the device and a pacemaker to prevent interference.
If using a pacemaker, hold the device on the side opposite the pacemaker and avoid carrying it in your front pocket.
Avoid exposing the device to heat, direct sunlight, or heating devices.
Do not use the wireless device while driving to reduce the risk of accidents.
Follow instructions provided for using the device during air travel.
Avoid using the device in dusty, smoky, damp, dirty environments, or near magnetic fields.
Ensure the power adapter is plugged into a socket near the devices and is easily accessible.
Turn off the device when not in use.
Avoid using the device in environments where flammables or explosives are stored to minimize the risk of explosion or fire.

Frequently Asked Questions (FAQ):

Q: Where can I find more information about the device?
A: You can download the user guide for your device from http://consumer.huawei.com/en/. Additionally, you can visit http://consumer.huawei.com/en/support/hotline/ for the most up-to-date contact information for your country or region.

Q: How do I access legal information about the device?
A: Go to Settings > About phone > Legal information on your device to access the legal information.

For more information

Go to http://consumer.huawei.com/en/ to download the user guide for your device and read the FAQ, privacy policy, and other information.
Go to Settings > About phone > Legal information to read the legal information.
Please visit http://consumer.huawei.com/en/support/hotline/ for the most up- to-date contact information for your country or region.

Your phone at a glance

Before you start, let’s take a look at your new phone.

To turn on your phone, press and hold the power button until your phone vibrates and the screen turns on.
To turn off your phone, press and hold the power button, and then touch .
To forcibly restart your phone, press and hold the power button until your phone vibrates.

HUAWEI-P10-Lite-Smart-Phone-2

Getting started

Follow the instructions in the following figures to set up your phone.

Do not insert or remove a SIM card while your phone is on.
Ensure that the SIM card is in the correct position and keep the card tray level when inserting it into your phone.

Please exercise caution when using the SIM ejector pin to avoid hurting your fingers or damaging your phone. Store your pin in a safe place out of the reach of children to prevent them from swallowing it or injuring themselves by accident.

Insert the SIM card into the correct card slot to ensure that it can be recognized by the phone.

The upper card slot may not support nano-SIM cards.
You can insert only a microSD card into it.

Safety Information

Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.

Viewing the safety and regulatory information
For more information on safety, touch Settings > About phone > Legal information > Safety information.
For more information on regulation, touch Settings >About phone > Authentication info.
For more information on certification logos, touch Settings > About phone > Certification logos.

Operation and safety

To prevent possible hearing damage, do not listen at high volume levels for long periods.
Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.
To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields.
When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.
Unplug the charger from electrical outlets and the device when not in use.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
Use only the following listed AC Adapters/Power Supplies: HUAWEI: HW-059200EHQ, HW- 059200AHQ, HW-059200BHQ, HW-059200UHQ.

Disposal and recycling information
This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal.
For more detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store.
Disposal of the device and batteries (if included) is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present.

Reduction of hazardous substances
This device is compliant with the REACH Regulation [Regulation (EC) No 1907/2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries (if included) arecompliant with the Battery Directive (Directive 2006/66/
EC). For up-to-date information about REACH and RoHS compliance, please visit the web site http://consumer.huawei.com/certification.

EU regulatory conformance

Body-worn operation
The device complies with RF specifications when used near your ear or at a distance of 0.5 cm from your body.
Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

WAS-LX1: The highest SAR value reported for this device type when tested at the ear is 0.90 W/kg, and when properly worn on the body is 0.91 W/kg.

WAS-LX1A: The highest SAR value reported for this device type when tested at the ear is 0.89 W/kg, and when properly worn on the body is 0.91 W/kg.

WAS-LX2: The highest SAR value reported for this device type when tested at the ear is 1.09 W/kg, and when properly worn on the body is 1.40 W/kg.

Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2009/125/EC.

The most recent, effective version of the DoC (declaration of conformity) can be viewed at http://consumer.huawei.com/certification.
The following marking is included in the product:
WAS-LX2:

WAS-LX1/WAS-LX1A:
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.

Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Restrictions in the 5 GHz band:
WAS-LX1/WAS-LX1A/WAS-LX2J: WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range.

ErP Product Information
WAS-LX1/WAS-LX1A: Hereby, Huawei Technologies Co., Ltd. declares that the product meets the directive 2009/125/EC and its implementation regulation (EC) NO 1275/2008 amended by (EC) 278/2009,(EC) 642/ 2009,(EU) 617/2013,(EU) 801/2013,and its
implementation regulation (EC) NO 278/2009.
The power consumption of product in networked standby if all wired network ports are connected and all wireless network ports are activated is 1.2 W.
For the product information displayed on the manufacturers’ freely accessible websites required by (EU) No 801/2013, please visit http://consumer.huawei.com/certification.

FCC Regulatory Compliance

Body worn operation
The device complies with RF specifications when used near your ear or at a distance of 1.5 cm from your body.
Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.

WAS-LX1: The highest SAR value reported to the FCC for this device type when using at the ear is 1.14 W/kg, and when properly worn on the body is 1.02 W/kg, and when using the Wi-Fi hotspot function is 1.34 W/Kg.
WAS-LX1A: The highest SAR value reported to the FCC for this device type when using at the ear is 1.03 W/kg, and when properly worn on the body is 0.69 W/kg, and when using the Wi-Fi hotspot function is 0.74 W/Kg.
WAS-LX3: The highest SAR value reported to the FCC for this device type when using at the ear is 1.25 W/kg, and when properly worn on the body is 1.04 W/kg, and when using the Wi-Fi hotspot function is 1.33 W/Kg.
WAS-L03T : The highest SAR value reported to the FCC for this device type when using at the ear is 1.13 W/kg, and when properly worn on the body is 1.01 W/kg, and when using the Wi-Fi hotspot function is 1.33 W/Kg.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user’s authority to operate the equipment.

Industry Canada compliance

Body worn operation
The device complies with RF specifications when used near your ear or at a distance of 1.5 cm from your body.
Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
WAS-L03T : The highest SAR value reported to the IC for this device type when using at the ear is 1.13 W/kg, and when properly worn on the body is 1.01 W/kg.

IC Statement
This device complies with CAN ICES-3 (B)/NMB-3(B).
This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Legal Notice
Trademarks and Permissions and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.

LTE is a trademark of ETSI.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy.

Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
All pictures and illustrations in this guide, including but not limited to the phone color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied.

WAS-LX1
WAS-LX1A

The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

Note: Remember the Google account your phone last logged in to.
During an untrusted factory settings restoration or microSD card–based update, Google’s anti-theft mechanism requires you to enter the Google account your phone last logged in to on the startup navigation screen for identity authentication. Your phone can properly power on only after the identity authentication passes.

Please visit http://consumer.huawei.com/en/support/hotline for recent updated hotline and email address in your country or region.

Model: