HUAWEI B315 LTE CPE Smartphone User Guide
- June 17, 2024
- Huawei
Table of Contents
HUAWEI B315 LTE CPE Smartphone
Product Information
Specifications
- Power indicator
- Signal strength indicator
- External antenna port
- Power button
- Power port
- LAN4/WAN port
- Telephone port
- Network mode indicator
- LAN/WAN indicator
- SIM card slot
- WPS button
- Reset button
- LAN port
- USB port
Product Usage Instructions
Installation
-
Step 1: Installing the SIM card
Do not remove the SIM card when it is in use. Doing so will affect the performance of your B315 and data stored on the SIM card may be lost. -
Step 2: Connecting cables
Do not change another unexpected power adapter unless the manufacturer provides it. The B315’s power adapter model is HW-120100XYW. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer.
Setting up a Wi-Fi connection
- From your Wi-Fi enabled client, scan for wireless networks in your area.
- Connect to the network name that matches the SSID found on the device label.
- When prompted for a password, enter the Wi-Fi Key found on the device label. (The Wi-Fi key is case sensitive.) Your client will notify you when it is connected.
For details about how to manually enable or disable the Wi-Fi function of the B315, refer to the WLAN settings section of the help information on the web management page. To prevent unauthorized parties from accessing your Wi-Fi network, it is recommended that you change the SSID and Wi-Fi key from time to time. For details, see the help information on the web management page.
Configuring your B315
- After a client is connected to the B315 through Wi-Fi or LAN port, launch a browser on the client and visit web management page (http://192.168.8.1).
- Enter the user name (admin by default) and password (admin by default) to log in to the web management page.
- Follow the quick setup wizard to check or set network connection parameters step by step. For details, see the help information on the web management page.
To protect your account, change the password after your first login. For details, see the help information on the web management page. If you modify the SSID and Wi-Fi key, you must set up the Wi-Fi connection on the client again.
Getting to know your B315
- Power indicator
- Network mode indicator*
- Wi-Fi®/WPS indicator
- LAN/WAN indicator
- Signal strength indicator
- SIM card slot
- External antenna port
- WPS button
- Power button
- Reset button*
- Power port
- LAN port
- LAN4/WAN port
- USB port
- Telephone port
*Network mode indicator
- Steady cyan: connected to an LTE network.
- Steady blue : connected to a 3G network.
- Steady yellow: connected to a 2G network.
- Steady green: connected to an Ethernet network.
Reset button
When the B315 is powered on, use a sharply pointed object to press and hold
for about 3 seconds until the indicator is blinking to restore the B315 to its
factory settings. After the factory defaults are restored, the B315 will
restart automatically. Restoring the default settings of the B315 will erase
all previous settings.
Installation
-
Step 1: Installing the SIM card
Do not remove the SIM card when it is in use. Doing so will affect the performance of your B315 and data stored on the SIM card may be lost.
-
Step 2: Connecting cables
Do not change another unexpected power adapter unless the manufacturer provide it. The B315’s power adapter model is HW-120100XYW. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer.
Setting up a Wi-Fi connection
- From your Wi-Fi enabled client, scan for wireless networks in your area.
- Connect to the network name that matches the SSID found on the device label.
- When prompted for password, enter the Wi-Fi Key found on the device label. (The Wi-Fi key is case sensitive.) Your client will notify you when it is connected.
NOTE :
- For details about how to manually enable or disable the Wi-Fi function of the B315, refer to the WLAN settings section of the help information on the web management page.
- To prevent unauthorized parties from accessing your Wi-Fi network, it is recommended that you change the SSID and Wi-Fi key from time to time. For details, see the help information on the web management page.
Configuring your B315
- After a client is connected to the B315 through Wi-Fi or LAN port, launch a browser on the client and visit web management page.
- Enter the user name (admin by default) and password (admin by default) to log in to the web management page.
- Follow the quick setup wizard to check or set network connection parameters step by step. For details, see the help information on the web management page.
NOTE:
- To protect your account, change the password after your first login. For details, see the help information on the web management page.
- If you modify the SSID and Wi-Fi key, you must set up the Wi-Fi connection on the client again.
For More Help
If you are experiencing any issues with the B315:
- Restart the B315.
- See the help information on the web management page.
- Restore the B315 to its factory settings.
- Contact your service provider.
Please visit http://consumer.huawei.com/en/support/hotline for a recently updated hotline and email address in your country or region.
NOTE:
The figures in this guide are for your reference only. Specific models may
vary slightly contact your service provider for more detailed information.
Safety information
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. LTE is a trademark of ETSI. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we protect your personal information, please see the
privacy policy at http://consumer.huawei.com/privacy-policy.
- Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.
- Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
- Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -20 °C to +70 °C. Extreme heat or cold may damage your device or accessories.
- Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.
- Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle.
- The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
- Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.
- Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area.
- The power plug is intended to serve as a disconnect device.
- For pluggable devices, the socket outlet shall be installed near the devices and shall be easily accessible.
- Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1/UL60950-1 and has been tested and approved according to national or local standards.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment help ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful to health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer, or household waste disposal service or visit the website http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and any electrical accessories are compliant with locally
applicable rules on the restriction of the use of certain hazardous substances
in electrical and electronic equipment, such as EU REACH, RoHS, and Batteries
(where included) regulations, etc. For declarations of conformity about REACH
and RoHS, please visit our website http://consumer.huawei.com/certification.
EU Regulatory Conformance Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. The most recent and valid version of the DoC
(Declaration of Conformity) can be viewed at
http://consumer.huawei.com/certification. This device may be operated in all
member states of the EU. Observe national and local regulations where the
device is used. This device may be restricted for use, depending on the local
network.
Restrictions in the 2.4 GHz band:
Norway : This subsection does not apply to the geographical area within a radius of 20 km from the center of Ny-Ålesund.
ERP Product Information
Hereby, Huawei Technologies Co., Ltd. declares that the product meets the
directive 2009/125/EC and its implementation regulation (EC) NO 1275/2008
amended by (EC) 278/2009,(EC) 642/2009,(EU) 617/2013,(EU) 801/2013,and its
implementation regulation (EC) NO 278/2009. The power consumption of the
product in networked standby if all wired network ports are connected and all
wireless network ports are activated is 7.0 W.
For the product information displayed on the manufacturers’ freely accessible websites required by (EU) No 801/2013, please visit http://consumer.huawei.com/certification.
Frequency Bands and Power
- Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
- Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.
The frequency bands and transmitting power (radiated and/or conducted) nominal
limits applicable to this radio equipment are as follows: GSM 900: 37 dBm, GSM
1800: 34 dBm, WCDMA 900/2100: 25.7 dBm, LTE Band
1/3/7/8/20/38: 25.7 dBm, Wi-Fi 2.4G: 20 dBm.
Accessories and Software Information
Some accessories are optional in certain countries or regions. Optional
accessories can be purchased from a licensed vendor as required. The following
accessories are recommended:
Adapters : HW-120100X6W, HW-120100X01 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z, or K, depending on your region)
The product software version is 21.321.03.00.00. Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/certification.
FCC Regulatory Compliance
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution : Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user’s authority to operate the equipment. This device is intended to be attached to a receiver that is not used to receive over-the-air broadcast signals. Connection of this device in any other fashion may cause harmful interference to radio communications and is in violation of the FCC Rules, part 15.
Please visit http://consumer.huawei.com/en/support/hotline for a recently updated hotline and email address in your country or region.
FAQ’S
If you are experiencing any issues with the B315, what should you do?
- Restart the B315.
- See the help information on the web management page.
- Restore the B315 to its factory settings.
- Contact your service provider.
Please visit http://consumer.huawei.com/en/support/hotline for a recently updated hotline and email address in your country or region.
References
- Certification | Legal | HUAWEI Global
- HUAWEI Global
- Hotline | HUAWEI Support Global
- banner
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>