iLIVE PLATINUM IAEP58 Noise Cancelling Wireless Earbuds User Guide

: June 16, 2024
: iLIVE PLATINUM

Table of Contents

iLIVE PLATINUM IAEP58 Noise Cancelling Wireless Earbuds
Product Information
Product Usage Instructions
Features
Battery Charging
Orientation & Controls (Right Earbud only)
Initial Bluetooth Connection
Troubleshooting
FCC Warnings
Additional Warnings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iLIVE PLATINUM IAEP58 Noise Cancelling Wireless Earbuds

Product Information

Specifications

Model: IAEP58 v2041-01
Battery Charging: Initial charge time is approximately 2 hours. Charge fully before use.
Indicator Lights: Red light when low battery, solid red light while charging, solid blue light when fully charged.
Controls: Volume/Skip, Power/Pair/Play/Pause/Speakerphone
Noise Cancelling: Earbuds do not have to be powered on for noise cancelling to work.
Bluetooth Range: Remain within 3 feet of the Bluetooth device for pairing.

Product Usage Instructions

Battery Charging

The initial charge time is approximately 2 hours.
Charge the earbuds fully before use.
When the battery is low, an indicator LED will flash red for 1 minute and a voice will announce “Low Battery”, then the unit will automatically power off.
While the unit is charging, it will display a solid red light.
When the unit is fully charged, it will display a solid blue light.

Orientation & Controls (Right Earbud only)

Volume / Skip: Press to adjust volume. While a track is playing, press and hold to skip ahead or back.
Power / Pair / Play / Pause / Speakerphone: Press and hold to power on or off. Press and hold for 9 seconds to power on and pair Bluetooth. Press to play or pause audio. Press to answer incoming phone calls.

Acoustic Noise Cancelling (ANC) Indicator Light

When ANC is on, the indicator light is solid blue.
ANC does not require the earbuds to be powered on.

Initial Bluetooth Connection

With the earbuds powered off, press and hold ****until they power on and the indicator light begins flashing red and blue. Remain within 3 feet of the Bluetooth device during pairing.
Using the controls on your Bluetooth device, select “IAEP58” in the Bluetooth Settings to pair.
Refer to the user’s manual for your specific device for more information if needed.
When successfully paired, a voice will announce “Bluetooth is connected” and the LED indicator will begin slowly flashing blue. Audio from the connected Bluetooth device will now be heard through the earbuds.
Use the controls on the connected Bluetooth device to select and play audio. Use the earbud controls or the connected Bluetooth device to play, pause, and adjust the volume level.
After the initial pairing, press and hold for approximately 5 seconds to power on and automatically connect to the Bluetooth device.

Speakerphone

To accept a call, press the ****button or use the controls on the connected phone.
To end a call, press the ****button or use the controls on the connected phone.
To re-dial the last dialled number, press the ****button twice.

FAQ

Q: What should I do if the earbuds become unpaired or will not connect normally?
A: Follow these steps in your device’s Bluetooth Settings Menu:

1. Delete the earbuds (Forget This Device).
2. Turn Bluetooth off then on again, and repeat the Initial Bluetooth Connection steps.

Features

Bluetooth Wireless: range 33 ft.
Active noise cancellation.
IPX4 water/sweat proof.
Rubberized coating.
Built-in microphone.
Voice prompts announce earbud operations.
Digital volume control.
Built-in rechargeable battery: 6 hr playtime with ANC OFF, 4 hr with ANC ON (100% volume).
Micro-USB port for battery recharge.

Includes

3 pairs of eartips: 1 small, 1 medium, 1 large
3 pairs of ear hooks: 1 small, 1 medium, 1 large
Micro-USB to USB charging cable
Premium travel case

Battery Charging

Pull back the cover on the DC Power Input.
Using a Micro-USB to USB cable, connect to the USB port of a powered-on computer or USB power adaptor (not included).

The initial charge time is approximately 2 hours. Charge fully before use.

When the battery is low an indicator LED will flash red for 1 minute and a voice will announce “Low Battery,” then the unit will automatically power OFF.
While the unit is charging it will display a solid red light. When the unit is fully charged it will display a solid blue light.

Orientation & Controls (Right Earbud only)

Initial Bluetooth Connection

With the earbuds powered OFF, press and hold ****until they power ON and the indicator light begins flashing red and blue. When pairing, remain within 3 feet of the Bluetooth device.
Using the controls on your Bluetooth device, select IAEP58 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information.
When successfully paired, a voice will announce “Bluetooth is connected” and the LED indicator will begin slowly flashing blue. Audio from the connected Bluetooth device will now be heard through the earbuds.
Use the controls on the connected Bluetooth device to select and play audio. Use the earbud controls or the connected Bluetooth device to play, pause, and adjust the volume level.
After initial pairing, press and hold for approximately 5 seconds. The earbuds will power ON and automatically connect to the Bluetooth device.

Speakerphone

To accept a call, press the ****button, or use the controls on the connected phone.
To end a call, press the ****button, or use the controls on the connected phone.
To re-dial the last dialled number, press the ****button twice.

Previously Connected Devices

The earbuds can remember multiple Bluetooth devices and will always try to reconnect to the last device used.
To re-connect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select IAEP58.

Troubleshooting

If the earbuds should become unpaired or will not connect normally, follow these steps in your device’s Bluetooth Settings Menu.

Delete the earbuds (“Forget This Device”).
Turn Bluetooth OFF then ON again, and repeat the Initial Bluetooth Connection steps.

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

Copyright © 2017 Digital Products
International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.