hotpepper AP33 Puya Plus Tablet User Manual

hotpepper AP33 Puya Plus Tablet

Product Information

Specifications

• Operating System: Android 13.0
• Display: 10.1″ HD display
• Resolution: 1280×800
• Storage: 4GB
• RAM: 64GB
• CPU: Quad-core
• Battery: 5000 mAh, Li-Ion Polymer
• Ports: Type-C, 3.5mm standard headphone jack
• Camera: 5MP front camera, 8MP rear camera
• Card Slot: Micro SD card slot, supports up to 256GB
• Voltage: 5V/2A
• Network Access: WIFI 802.11 ac/a/b/g/n+BT5.0

Hardware Overview
The hardware overview section provides an overview of the physical components of the Puya Plus Tablet.

Initial Setup
To get started with your new tablet, follow these steps:

1. Ensure that your tablet has been fully charged before the first use.
2. Press and hold the power button for 5 seconds until you see the Hotpepper logo on the screen.
3. Allow 10 seconds for the tablet to power on.
4. You will be prompted to start the initial setup process.
5. Language selection: Scroll through the list of languages to choose your preferred language then tap Start.
6. Wi-Fi setup: A list of Wi-Fi networks will appear. Tap your network name. If your Wi-Fi network is password protected, you will be prompted to enter the password. Tap Continue.
7. Enter username: Enter the username and click Next.
8. Protect Your Tablet: Create a password or select Not now and set it later.
9. Skip anyway: Tap/click SKIP ANYWAY.
10. More: Click MORE, and then click ACCEPT.
11. Desktop: Wait a few seconds to get into the desktop.

Software Overview

Home Screen
Your Learning Tab features the AndroidTM operating system, version 12. The Google PlayTM store app gives you access to a catalog of over one million apps. This is the default home screen. To access quick settings, swipe down from the top of the screen.

Navigation bar
The navigation bar at the bottom of the screen allows you to switch between apps. In some apps, the navigation bar becomes hidden. To reveal it, swipe up from the bottom edge of the screen. The left button (back) takes you back one screen. The center button (home) takes you to the home screen. The right button (recent apps) brings up thumbnails of recently used apps; tap one to switch to it.

Welcome!
Thank you for purchasing our new Puya Plus Tablet. This User Manual will provide step-by-step instructions to help you how to use your new device. After opening the box, please make sure the package contents are available for you.

Safety Warnings

1. Do not disassemble the product or accessories.
2. Do not use alcohol, thinner, or benzene to clean the surface of the device.
3. The device should be charged for about 4 hours during the first three charge cycles.
4. Do not store the device in places with high temperature, humidity, or dust. Avoid dropping or strong impact.
5. Use an appropriate volume setting. High volume may cause hearing damage when using headphones.
6. To charge the device, use the included USB cable and adapter.
7. When transferring data to/from a computer, do not suddenly disconnect the cable; this may cause the device to malfunction. Use a “Safely Remove Hardware” or “Eject” function on the computer.
8. Obey all local laws and regulations when using the device, such as when driving or aboard an aircraft.
9. The device and included accessories are not water-resistant or waterproof.

Technical Specifications

jack

Camera| 5MP front camera, 8MP rear camera
Cart Slot| Micro SD card slot, supports up to 256GB
Voltage| 5V/2A
Network Access| WIFI 802.11 ac/a/b/g/n+BT5.0

Hardware Overview

Initial Setup
To get started with your new tablet, ensure that your tablet has been fully charged before the first use. Press and hold the power button for 5 seconds until you see the Hotpepper logo on the screen. Allow 10 seconds for the tablet to power on. You will be prompted to start the initial setup process.

• Step 1:
  

  • Language selection: scroll through the list of languages to choose your preferred language then tap Start.
  • Note : If the touch screen becomes unresponsive, insert a small pin or paperclip into the reset hole to restart the tablet.

• Step 2:
  

  • Wi-Fi setup: A list of Wi-Fi networks will appear. Tap your network name. If your Wi-Fi network is password protected, you will be prompted to enter the password. Tap Continue.

• Step 3:

  • Enter the username and click “Next”.
  • Protect Your Tablet: Create a password or select “Not now” and set it later.
  • Tap/Click” SKIP ANYWAY”.
  • Click “MORE”, and then click” ACCEPT”. Wait a few seconds to get into the desktop.

Software Overview

Home Screen
Your Learning Tab features the Android™ operating system, version 12.Google Play™ store app gives you access to a catalog of over one million apps.

This is the default home screen:

• Swipe down from the top of the screen to access quick settings.

Navigation bar
The navigation bar at the bottom of the screen allows you to switch between apps. In some apps, the navigation bar becomes hidden. To reveal it, swipe up from the bottom edge of the screen. The left button, back, takes you back one screen. The center button, home, takes you to the home screen. The right button, recent apps, bring up thumbnails of recently used apps; tap one to switch to it.

Camera

• Swipe from left to right on the screen, you can choose the photo or video options.
• Settings are on the top left corner, tap the icon on the left, then you will see the setting button below

Browsing the Internet
Your tablet comes preloaded with the Chrome web browser. Locate and tap the icon in your apps. Chrome works just like a web browser on other devices and computers.

Downloading Content from the Google Play Store
Google Play offers an expansive catalog of apps, music, movies, etc.

Backup with Google
When you create a Google account on your Learning Tab, you are given the option to automatically back up app data, Wi-Fi passwords, and other settings to Google’s servers. If you wish to change this setting after creating or using your existing Google Account:

1. From Grown Up mode, tap Settings;
2. Scroll down tap and reset;
3. Check, or uncheck Back up my data to enable or disable automatic backup of your data to Google’s servers.

Google Services Quick Setup

1. A Wi-Fi connection is required to access Google Services. First, connect to a network.
2. Sign in with an existing account or create one. You can create a new account for the child that is linked to an existing adult account; this allows the parent to be notified when changes occur or a new device is logged into.
3. The Account Added screen provides confirmation the account has been added.
4. Additional services such as “Backup to Google Drive” can be accepted to save and preserve data (pictures and files).
5. Sign in to the Google Play Store to update existing apps or download new apps. Kids Place software and Google Services may change or update without any advance notice. Kids Place software and Google Services may change or update without any advance notice. Parents are responsible for additional installed apps or websites allowed on this product. Always back up any important data before resetting the tablet.

Connecting to a Computer

• Step 1:
  Connecting to your computer by USB

• Step 2:
  Pull down the menu from the right top of the screen, click/tap“Charging this device via USB” and click “Tap for more options”

• Step 3:
  Select“File Transfer”

Your device/disk name will appear as model NO. on your computer. You can now transfer or backup files from the tablet to a computer.

Factory Settings
To perform a factory data reset, you must use the Grown-up login and PIN.

WARNING : A factory data reset will delete all user settings and data such as apps that you have downloaded, music, videos, photos, etc. Please back up important data on the device before resetting your tablet.A ll preloaded applications will automatically be re-installed. After the factory data reset, you need to complete the initial setup process.

1. Tap Home at the bottom of the screen;
2. Tap Settings;
3. Scroll up and tap System;
4. Tap Reset Options;
5. Tap Erase all data (factory reset).

Control Panel Settings

The control panel settings allow the following features:

• Network & Internet — Change Wi-Fi settings, check your network configuration, airplane mode, or VPN (a virtual private network).
• Connected Devices — USB (Charge phone, transfer files, etc.), Pair new device, turn on Bluetooth.
• Apps & Notifications — Set permissions & default apps.
• Battery — Set power-saving modes.
• Display — Set brightness, wallpaper, sleep timer, auto-rotate screen, font size, display size.
• Sound — Set volume level or do not disturb.
• Storage — Hard drive information.
• Privacy — Manage and protect your data.
• Security & Location — Google features to help protect or find the device.
• Accounts — Adding and modifying accounts.
• Accessibility — Set screen readers, display, interaction, controls.
• Digital Wellbeing & Parental Controls — Set screen time, app time, and bedtime schedules.
• Google — Set services & preferences.
• System — Set languages, time, backup, and updates.

Product Care

Micro SD Card Slot
The tablet contains a Micro SD memory card slot. The Micro SD memory card is sold separately. Most software applications (apps) require to be installed on internal memory, so use the external memory to store music photos, movies, files, or other data. The memory card slot will read most SD Cards and supports up to 256GB. We recommend purchasing a memory card with a good brand reputation to help ensure comparability.

Charging
Use the included USB cable and Adaptor to charge the tablet. If the cable becomes damaged or lost, you can order a replacement cable or charger from the manufacturer. Using a third-party cable may void the warranty. It is not recommended to leave the battery charging for more than 8 hours. Do not use the charger in a wet or humid environment. Only charge the tablet in a safe environment.

Trouble Shooting

setting
2| Slowness or unresponsive

programs

| Close unused apps; clear app cache;
3| Network connectivity issues; no Wi-Fi

connection

| Reset network connection; toggle airplane mode on/off
4| The tablet is hot or

overheating

| Close unused apps; clear app cache;
5| App crashes| Reopen the app; update the app through Play

Store

6| Unresponsive screen| Restart the table by holding the power button for 8

seconds

7| Google Play Store crashes| Clear the app cache and restart
8| Apps won’t download from

Play Store

| Clear Play Store cache; open app settings

and clear local search

9| Can’t turn the tablet on/off| Hold the power button for the Power Menu

options

10| Touch screen issue; not

responding to

| Low battery power; check for physical

damage

11| The battery does not hold a

charge

| Check the power cable; inspect the power button

if stuck

12| Sound is low| Check the speaker port for blockage
13| Camera or SD Card not| Corrupt Software / Reset to factory default
 | working|
---|---|---
14| Download issues| Make sure it connects to the PC properly.

You`d better not use the front USB port to connect to the PC.

15| The device crashed or can’t turn on| Once the device crashes during the running time, It can be restarted by tapping the RESET

button at the side of the device.

16| Out of run| Check the batteries whether it out of charge. Checking after getting connected to the power adapter. If it still can not turn on after charging, please contact the

customer service center.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, punderPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Specific Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: This device has also been tested against this SAR limit.

This device was tested for typical body-worn operations with the back of the This device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of This device. The use of belt clips, holsters ,and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements,and should be avoided.

FAQ’S

Can I disassemble the product or accessories?

No, you should not disassemble the product or accessories.

How should I clean the surface of the device?

Do not use alcohol, thinner, or benzene to clean the surface of the device.

How long should I charge the device during the first three charge cycles?

The device should be charged for about 4 hours during the first three charge cycles.

Can I store the device in places with high temperature, humidity, or dust?

No, you should avoid storing the device in places with high temperature, humidity, or dust.

Can high volume cause hearing damage when using headphones?

Yes, using high volume may cause hearing damage when using headphones. Use an appropriate volume setting.

How should I charge the device?

To charge the device, use the included USB cable and adapter.

Can I suddenly disconnect the cable when transferring data to/from a computer?

No, do not suddenly disconnect the cable when transferring data to/from a computer. This may cause the device to malfunction. Use a Safely Remove Hardware or Eject function on the computer.

Are there any restrictions when using the device?

Yes, obey all local laws and regulations when using the device, such as when driving or aboard an aircraft.

Is the device water resistant or waterproof?

No, the device and included accessories are not water resistant or waterproof.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>