ONWAY YK001 Luxury Remote Control User Manual

****

ONWAY YK001 Luxury Remote Control

Product Information

Specifications:

• Size: 80mm x 80mm
• Weight: 128g
• Paper Type: Coated paper
• Color: Double-sided color
• Folding: Yes

Product Usage Instructions

Section 1: Unboxing and Setup

1. Open the packaging and take out the folded coated paper.
2. Unfold the paper carefully to its full size of 80mm x 80mm.
3. Ensure you have a compatible receiver device for the folded paper.

Section 2: Connecting the Device

To connect the device, follow these steps:

1. Locate the receiver device’s input port.
2. Gently insert the folded coated paper into the receiver’s input port.
3. Ensure a secure connection is established.

Section 3: Powering On the Device

1. Make sure the receiver device is powered off before proceeding.
2. Connect the receiver device to a power source using the provided power cable.
3. Power on the receiver device.

Section 4: Using the Device

To use the device, follow these instructions:

1. Ensure the folded coated paper is securely connected to the receiver device.
2. Turn on any necessary audio or visual equipment connected to the receiver device.
3. Adjust the settings on the receiver device to optimize the output from the folded coated paper.

FAQ (Frequently Asked Questions)

Q: Can I use the device without a compatible receiver?
A: No, the device requires a compatible receiver for proper functionality.

Q: Is the device safe to use in terms of RF exposure?
A: Yes, the device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Q: What should I do if I encounter any issues with the device?
A: If you experience any issues or need assistance, consult the dealer or an experienced radio/TV technician for help. The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance, as such modifications could void the user’s authority to operate the equipment.

PART LIST

HOW TO MOUNT THE REMOTE CONTROL

1. The battery box is at the bottom of the remote control. Turn the bottom of the battary box upward.
2. Press the circular depression at the bottom, the battery cover will pop up.
3. Insert the battery according to the positive and negative poles.
4. Put the battary cover back to bottom of remote control.

CODE SETTING

If you get a new remote control, please code matching first. The method is as follows.

Threplace lease evil to steps be rewcoded after batteries were properly installed

1. Connect the light to power, and long press the center position within 5 seconds, meanwhile rotate the housing clockwise or counterclockwise
2. If the light flashes, the code was successfully matched.

FUNCTION DIAGRAM OF REMOTE CONTROL

HOW TO USE THE REMOTE CONTROL

1. Turn on/off: short press center position once
2. 2-hour timer: long press the center position for 5 seconds, the light flash once, then turn on the 2-hour timer.
3. Adjust brightness: rotate the upper cover plate clockwise rotation: light up counterclockwise rotation: light dims
4. adjust color temperature (3000k-6500k): rotate the housing clockwise rotation: 6500K cold light counterclockwise rotation: 3000K warm light
5. Automatic light sensor function: short press twice, the small indication light turns green, this function will start working:
   Environment turns bright, the lamp turns dark gradually;
   Environment turns dark, the lamp turns bright gradually.
   Short press the remote control for twice(or rotate the upper cover plate), the blue indicator light will turn off, this function will also turn off.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver:
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>