SMTEPASTER SC963603W 3 Shelf Mobile Wall Unit Instruction Manual

SMTEPASTER SC963603W 3 Shelf Mobile Wall Unit

Product Information

Specifications

• Model: SC963603W
• Components :
  • (2) Floor Panels (open hole sockets)
  • (3) 1st, 2nd, and 3rd Levels (closed hole sockets)
  • Legs: (10) – 12″, (8) – 24″, (8) – 36″
  • Accessories : (4) – Mobile Bars

Product Usage Instructions

Step 1: Floor level

1. Lay the floor panels (open hole sockets) in the desired position.
2. Place the legs as shown, ensuring that the legs go through to the ground.

Step 2 and Step 3: 1st level and 2nd level

1. Position the 1st and 2nd level panels (closed hole sockets) overhanging outside edges as shown.
2. Push down on the panels until the legs rest on top of the sockets.

Step 4: 3rd level

1. Position the 3rd level panel overhanging the outside edge as shown.
2. Place the remaining two 12″ legs in the outside corners of the panel.
3. Push down on the legs until they rest on top of the sockets.

Step 5: Mobile Bar

1. Position the fixture on its back side.
2. Insert the stems of the mobile bar inside the sockets as shown.
3. Ensure that the brakes of the mobile bar are placed towards the front of the fixture.

FAQ

FAQ (Frequently Asked Questions)

• Q : How many levels does the SC963603W mobile wall unit have?
• A: The SC963603W mobile wall unit has three levels.
• Q: How many legs are included in the package?
• A: The package includes ten 12″ legs, eight 24″ legs, and eight 36″ legs.
• Q : Can I use the mobile bar on any level of the wall unit?
• A: Yes, you can position the mobile bar on any level of the wall unit as desired.
• Q: Do I need to oil the sockets before assembly?
• A: Yes, it is recommended to oil all sockets before assembly to ensure smooth installation.

ASSEMBLY INSTRUCTIONS

Fully Assembled

installation instruction

• Step 1 Floor Level
  Lay floor panels (open hole sockets) in position and place legs as shown. (Make sure legs go through to ground).

• Step 2 and Step 3 1st level and 2nd level
  Position the 1st and 2nd level panels (closed hole sockets) overhanging outside edges as shown. Push down until the leg rests on top of the socket.

• Step 4 3rd level
  Position the 3rd level panel overhanging the outside edge as shown. Next place the (2) remaining 12” legs in the outside corners of the panel. Push down until the leg rests on top of the socket.

Mobile Bar

• Step 5 Mobile Bar
  Position the fixture on its back side and insert the stems of the mobile bar inside the sockets as shown. The brakes go to the front of the fixture.

Components:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>