Limited Too LBT507 Photo Frame And Wireless Speaker User Manual

: June 16, 2024
: LIMITED TOO

Table of Contents

Limited Too LBT507 Photo Frame And Wireless Speaker
Specifications
FAQ
In the Box
Location of Controls
Charging the Speaker
Using the Speaker
FCC STATEMENT
WARRANTY
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Limited Too LBT507 Photo Frame And Wireless Speaker

Limited-Too-LBT507-Photo-Frame-And-Wireless-Speaker-
PRODUCT

Specifications

Feature	Description
Model	LBT507
Type	Photo Frame & Wireless Speaker
Power Source	Micro USB Charging
Bluetooth Connectivity	Yes

NOTE: Older devices may require a password before pairing to other Bluetooth devices. If prompted, enter “0000” in the password field. Then press OK or ENTER to connect.

Powering ON/OFF

To turn the speaker ON, slide the [ON/OFF] switch to the ON position. A tone will be heard indicating that the speaker has power.
To turn the speaker OFF, flip the [ON/OFF] switch to the OFF position.

Playing Music

The bluetooth connection will be automatically reestablished with the last paired device when the speaker is turned on. If the speaker does not connect automatically, open the Bluetooth settings on your device and select the speaker (LBT507) to connect. Ensure your device’s Bluetooth function is turned on.

Insert a Photo

Carefully lift the clear insert and remove it from the speaker as shown in the illustration below.
Insert any 4 x 6 size photograph in the clear insert and slide it back into the speaker.

Limited Warranty

[The limited warranty section contains legal text regarding the warranty terms and conditions, including the warranty period, what is covered by the warranty, and how to obtain warranty service. For detailed warranty information, please refer to the actual user manual of the product.]

Legal Information

[The legal information section includes various legal disclaimers and notices related to the use of the product. For complete legal information, it is advisable to review the full user manual.]

FAQ

Q: How do I charge the speaker?
A: Use the provided micro USB charging cable to connect the speaker to an AC adapter or USB port. The LED will be RED during charging and will shut off when fully charged.
Q: How can I pair the speaker with my Bluetooth device?
A: Turn the speaker on to enter pairing mode, open your device’s Bluetooth settings, and select the speaker’s model number (LBT507) to connect.
Q: What should I do if my older device asks for a password to connect via Bluetooth?
A: Enter the password “0000” if prompted during the Bluetooth pairing process.
Q: How can I insert a photo into the speaker?
A: Lift the clear insert, place a 4 x 6 photo, and then slide it back into the speaker.
Q: Where can I find the full user manual and warranty information?
A: The full user manual and warranty information can be found on Manual-Hub.com – Free PDF manuals.

In the Box

Limited-Too-LBT507-Photo-Frame-And-Wireless-Speaker-
FIG-1

Location of Controls

BACK

Power [ON/OFF] switch
LED charging indicator
Micro USB charging port
LED Bluetooth indicator

Charging the Speaker

Insert the small end of the micro USB charging cable into the micro USB charging port on the back of the speaker.
Connect the other end of the micro USB charging cable to an available USB port on your computer or AC Adaptor (not included).
The LED indicator will remain RED when the speaker is charging. It will shut off when the speaker is fully charged.
When the battery is fully charged, carefully remove the micro USB charging cable.

Pairing the Speaker

Slide the LON/OFF] switch to the ON position. A tone is heard, indicating that the speaker is now in pairing mode. The LED indicator will quickly flash BLUE.
Open your mobile device’s Bluetooth settings. Set your mobile device to discover other nearby Bluetooth devices.
When the Speaker’s model number appears (LBT507) in the list of found devices, select it to connect to your mobile device.
After a successful pairing, a tone is heard, indicating that Bluetooth is connected. The LED indicator will slowly flash BLUE.

NOTE: Older devices may require a password before pairing to other Bluetooth devices. If prompted, enter “0000” in the password field. Then press OK or ENTER to connect.

Using the Speaker

Powering ON/OFF

To turn the speaker ON, slide the [ON/OFF] swineherd indicating that the speaker has power.
To turn the speaker OFF, flip the [ON/OFF] switch to the OFF position.

Playing Music
To enjoy music wirelessly on your speaker, make sure that the speaker is properly paired to your Bluetooth-enabled device. If you are pairing the device for the first time, please consult the “Pairing the Speaker” section of this user guide.
All media playback and volume adjustment are controlled through your Bluetooth-paired device.

Insert a Photo

Carefully lift the clear insert and remove it from the speaker as shown in the illustration below.
Insert any 4 x 6 size photograph in the clear insert and slide it back into the speaker.

Legal Information
READ THIS MANUAL CAREFULLY AND SAVE
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

FCC STATEMENT

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARRANTY

90 Days Limited Warranty
In the unlikely event that this product is defective, or does not perform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service centre for repair or exchange.

TO OBTAIN WARRANTY SERVICE

Call the Customer Support number located below, or go to our website portal to receive an SRO number.
Provide proof of the date of purchase within the package (dated bill of sale).
Write the SRO number on the package before shipping.
Prepay all shipping costs to the authorized service centre, and remember to insure your return.
Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
Describe the defect or reason you are returning the product.

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service centre determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.

Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, or unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service centre for repair must be suitably packaged.

Limitation of Warranty
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. IT’S AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.