LiMiTeD TOO LBT504 Glitter Glam Wireless Speaker User Manual

June 16, 2024
LIMITED TOO

LiMiTeD-TOO-LOGO

LiMiTeD TOO LBT504 Glitter Glam Wireless Speaker

In the Box

Location of Controls

BACK

LiMiTeD-TOO-LBT504-Glitter-Glam-Wireless-Speaker-FIG-2

  1. [POWER] Switch
  2. Charging LED Indicator
  3. Micro USB Charging Port
  4. Bluetooth LED Indicator
  5. Aux-in Jack

Pairing the Speaker

  1. Flip the [POWER] switch on the back of the speaker to the ON position. A tone will be heard indicating that the speaker is powered ON and in pairing mode and the Bluetooth LED indicator will quickly flash BLUE.
  2. Set your Bluetooth-enabled device to search for Bluetooth devices.
  3. When your Bluetooth-enabled device finds the speaker, select “LBT504” from the list of found devices.
  4. After a successful pairing, a tone will be heard indicating that the speaker is paired to your device and the Bluetooth LED indicator will slowly flash BLUE.

On an iPhone or Android Device
Go to SETTINGS > BLUETOOTH (make sure Bluetooth is turned ON)

The screenshots above are typical of many Buetooo eating cos in the market today and are used to assist in the explanation of the paring process Your Bluescom-arabica device in the article and interaction with the Bluetooth Spanimay differs slightly from the #lustrations above.

Using the Speaker

Powering ON/OFF

  • To turn the speaker ON, flip the [POWER] switch to the ON position. A tone will be heard indicating that the speaker has power.
  • To turn the speaker OFF, flip the [POWER] switch to the OFF position.

Playing Music
To enjoy music wirelessly on your speaker, make sure that the speaker is properly paired to your Bluetooth-enabled device. If you are pairing the device for the first time, please consult the “Pairing the Speaker” section of this user guide.
All Media playback and volume adjustments are controlled through your Bluetooth-paired device or your Aux-connected device.

Charging the Speaker
To charge the speaker attach the small end of the micro USB charging cable to the micro USB charging port on the back of the speaker. Connect the other end to your computer or USB charging device. The LED indicator will turn RED while charging and turn off when the speaker is fully charged. When complete, disconnect the micro USB cable.

LiMiTeD-TOO-LBT504-Glitter-Glam-Wireless-Speaker-FIG-4

Using as a Wired Speaker
To use the speaker as a wired device, attach the 3.5mm aux cable to the speaker’s aux-in jack and the other end to your device’s headphone jack. The Bluetooth LED indicator will stay solid BLUE while the 3.5mm cable is attached.
Bluetooth functionality will be automatically disabled while the 3.5mm aux cable is connected to the speaker.

Additional Warnings and Precautions

READ THIS MANUAL CAREFULLY AND SAVE
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

FCC STATEMENT

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Limited Warranty

90 Days Limited Warranty
In the unlikely event that this product is defective, or does not perform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service centre for repair or exchange.

TO OBTAIN WARRANTY SERVICE

  • Call the Customer Support number located below, or go to our website portal to receive an SRO number.
  • Provide proof of the date of purchase within the package (dated bill of sale).
  • Prepay all shipping costs to the authorized service centre, and remember to insure your return.
  • Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
  • Describe the defect or reason you are returning the product.

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service centre determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.

Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, or unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service centre for repair must be suitably packaged.
Limitation of Warranty:
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTEE OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

CONTACT

  • The shipping address of the authorized service centre is da Southern Telecom, Inc.
  • Attention: Customer Service (2nd Floor)
  • 14-C 53rd Street
  • Brooklyn, NY 11232
  • Should you have any questions or problems concerning this product, please
  • contact our customer service department at:
  • Customer Support:
  • & Phone: 1-877-768-8481
  • Monday-Friday 8 AM-10 PM (EST)
  • www.southerntelecom.com.
  • Click on “Product Support”
  • If you have any questions, call 1-877-768-8481
  • www.southerntelecom.com and click on “Product Support”

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals