LG SN9Y Wi-Fi Sound Bar Instruction Manual
- June 16, 2024
- LG
Table of Contents
LG SN9Y Wi-Fi Sound Bar
Please read this manual carefully before operating your set and retain it for future reference. To view the instructions for advanced features, visit http://www.lg.com and then download the Owner’s Manual. Some of the content in this manual may differ from your unit.
WHAT IN THE BOX
Front Panel
Reset the Unit
Press and hold the on the unit until you hear the beep sound once.
Rear Panel
- HDMI OUT (TV eARC/ARC) · · · · · · · Connect to a TV.
- HDMI IN · · · · · · · · Connect to device with HDMI OUT.
- OPTICAL IN · · · · · · · · · · · · Connect to an optical device.
- USB port · · · · · · · · · · · · · · · · · · · Connect to a USB device.
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and follow the steps below.
- Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
- Turn on the soundbar.
- The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.
Manually Subwoofer Connection
If the subwoofer does not make a sound, try to connect manually.
- Press Pairing on the rear of the wireless subwoofer.
- The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing.)
- Turn on the soundbar.
- Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
TV Connection
Connect the sound bar and TV using Optical ( A ) or HDMI ARC (B).
Optical Connection
- Connect the sound bar to the TV using an Optical cable.
- Set up [External Speaker (Optical)] on your TV setting menu.
HDMI (TV eARC/ARC) Connection
- Connect the sound bar to the TV using an HDMI cable.
- Set up [External Speaker (HDMI ARC)] on your TV setting menu.
- HDMI connection is unavailable if your TV does not support HDMI ARC.
- If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority
Additional Device Connection
- Connect to the external device as follow.
- Set the input source by pressing F repeatedly
Network Connection
- Check network condition. A router connected to the network should be installed.
- Connect your smart device to your home network.
- Connect the sound bar to the power supply
- All devices should be connected to the same router
Step.1 Install the “Google Home” App
Download the Google Home App from the Google Play or App Store.
Step.2 Set up the Wi-Fi connection with the app
- Connect your smart device to the Wi-Fi network that you’ll use for your unit. In the case of iOS devices, it should be turned on Bluetooth setting on your smart device.
- Launch the “Google Home” app.
- Follow the steps for a Wi-Fi connection on the app.
- When the unit is properly connected to Wi-Fi, “CONNECTED” will appear on the display window with sound.
- When connected to Wi-Fi, this app may request to create a Google Account. You will need a Google account to use this app.
- The “Google Home” app is provided by Google. It might be revised by a change of Google Policy.
Remote control
Replacement of Battery
SOUND EFFECT: Selects a sound effect mode.
- TV remote: Long press SOUND EFFECT and press it again to use TV remote control.
- FOLDER : Searches a folder.
- Displays the information of a file, an input source, a connected Bluetooth device name or an application name.
- Auto Power ON/OFF: Long press J and press it again.
- Adjusts sound level of each speaker.
- Surround sound: Long press and press it again.
- REPEAT: Listens to your files repeatedly or randomly.
Additional
Download LG Wi-Fi Speaker Application You can manage the speaker settings and control the speaker by using “LG Wi-Fi Speaker”. Download “LG Wi-Fi Speaker” on the App Store or Google Play Store.
AI Room calibration
AI Room Calibration is a sound tuning tool, which adjusts the audio settings
of the Sound Bar based on the room acoustics and environment. To access the AI
Room Calibration it is necessary to install the “LG Wi-Fi Speaker” app. On [My
Speaker] menu, click setting icon and choose [AI Room Calibration].
Additional Information
Specification
Design and specifications are subject to change without notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.lge.com. In addition to the source code, all referred
license terms, warranty disclaimers and copyright notices are available for
download. LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such as the
cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for a
period of three years after our last shipment of this product. This offer is
valid to anyone in receipt of this information.
References
- Manual-Hub.com - Free PDF manuals!
- LG Electronics & Home Appliances | Shop Now | LG USA
- Manual-Hub.com – Free PDF manuals!