NESPRESSO PROFESSIONAL In Tank Water Filter Cartridge Zenius Machine Instruction Manual
- June 16, 2024
- NESPRESSO PROFESSIONAL
Table of Contents
NESPRESSO PROFESSIONAL In Tank Water Filter Cartridge Zenius Machine
Specifications
- Compatible with: Zenius machines
- Filter lifetime: 4 months
- Water tank capacity: Minimum 800 ml
Optional In-Tank Water Filter (if fitted to Zenius)
If you are using optional in-tank water filters on your Zenius machine, and
you are restarting the machine after a period of business shutdown, please
replace existing in-tank filter with a new one. Simply follow the steps to the
‘Filter cartridge exchange procedure’ below.
Note: Optional in-tank water filters for Zenius machines are not included
with new machine and not a part stocked/supplied by Nespresso Professional.
Product Usage Instructions
- Empty water tank.
- Remove used water filter cartridge and discard it.
- Clean and flush water tank with a soft towel.
- Remove the new filter from its Using a coin or something packaging.
- similar to a coin, turn the dial anticlockwise.
- The window on the dial should begin with the current month e.g. 5 for May. Life time of the filter is 4 months.
- Insert the water filter cartridge .
- Fill water tank with fresh in the water tank.
- potable water and insert in the coffee machine.
- Dispense 800mL of hot water Switch off the main power button.
- Press and hold ‘Hot Water’ button while turning on the machine.
- Observe blinking cycle on the machine.
- To select new filter, press ‘Ristretto’ during blinking cycle.
- Confirmation of selection: New filter is selected.
- About 150mL cold water flows out of the hot water outlet within approx. 50 seconds.
If you require assistance, please complete the contact us form on our website and a Nespresso representative will be in touch.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>