EMERSON Supervisory Control SOA Software Installation Guide
- June 4, 2024
- Emerson
Table of Contents
EMERSON Supervisory Control SOA Software
EMERSON Supervisory Control SOA Software
Overview
This document explains how to install the SOAP Extension Module onto Supervisory controllers.
SOAP ADF Versions
| ADF Name | Controller Type | Supported Versions |
|---|---|---|
| 530-0120_SOAP_ROLA.adf | E3/Site Supervisor | 2.16F02 and later |
| 530-0121_SOAP_ReadWrite.adf | E3/Site Supervisor | 2.16F02 and later |
| 530-0122_SOAP_ROLAmO.adf | E3/Site Supervisor | 2.16F02 and later |
Installing the SOAP Extension Module
An ADF is an Application Description File. It is not automatically activated on a Supervisory controller after installation. A license key is required to enable. Contact your Sales representative or Customer Service to obtain an ADF. This can be uploaded on a Supervisory controller using the File Management screen. It requires a license key to activate the application after the ADF has been uploaded. The license key can be obtained from Customer Service with necessary approval.
Email Solutions.CustomerService@Emerson.com with the below information to generate the required license:
- Name of the application/device
- Supervisory controller MAC address and Model Type
- Number of instance of the application
Prerequisites
You will need the following:
- The SOAP Extension Module built for your version of Supervisory controller firmware.
- The SOAP Extension Module license key for your unit.
- Contact Customer Service for ADF Licensing information Solutions.CustomerService@Emerson.com
Installation Steps
-
Step 1 – Obtain ADF and License
Obtain the correct ADF for the Supervisory controller firmware version on the target unit and license key. -
Step 2 – Installing ADF
Install the SOAP Extension Module ADF onto the Supervisory controller using the Install ADF File button and upload the features of the Supervisory controller. -
First, go to the gear icon Configure System> File Management & Licensing> Install ADF File button.
-
Click Install ADF File then click Select.
-
Step 3 – Browsing for the ADF on PC
-
Select the ADF on your PC. (For this example, Indigo _Ice. ad is used).
-
Click Install then confirm OK.
-
Step 4 – Loading the ADF
-
Once the ADF loads, click Reset then OK to reset system.
Stability Guideline Recommendations
* No more than 50 points per request.
* No more than 1 request every 10 seconds.- Step 5 – License Key Entry
- Go to the gear icon > Configure System> File Management & Licensing> Install License Management button.
- Enter the License Key.
- Once entered, click OK.
Document Part # 026-4170 Rev 2
- This document may be photocopied for personal use.
- Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
- Join Emerson Technical Support on Facebook. http://on.fb.me/WUQRnt
- For Technical Support call 833-409-7505 or email ColdChain.TechnicalServices@Emerson.com
The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. Emerson reserves the right to modify the designs or specifications of such products at any time without notice. Responsibility for proper selection, use and maintenance of any product remains solely with the purchaser and end-user. ©2022 Emerson is a trademark of Emerson Electric Co.
References
- Log into Facebook | Facebook
- Copeland | Copeland US
- Copeland is Engineered for Sustainability | Copeland US