LG 4.0 Cuft Large Home Safe Fireproof Waterproof User Manual

**LG 4.0 Cuft Large Home Safe Fireproof Waterproof User Manual

**

IMPORTANT REMINDER:

• Please read the instructions carefully and use the product correctly.
• This summary may not include every detail of all variations and considered steps
• AA 1.5V Batteries (total 4 pieces) are required before setting up your personal code. Please note the batteries are not included in the original package.
• We suggest you buy 8 pieces AA 1.5A Batteries for both Safe Box and Emergency Battery Box (Gifted Parts Random) use.

INNER PRIVACY CABINET :
You can use the key to open the inner cabinet

IMPORTANT NOTES:

1. Continuous input wrong password for 3 times, the screen will display the Alarm Horn symbol, and alarm for 60 seconds; enter the correct password in the alarm status to cancel the alarm.
2. If you forget the personal password and the manager code, you can still use the Main Key + Emergency key + Rotary Switches to open the safe box.
3. If batteries run out of power and cannot use the digital password, you can use Emergency Battery Box to supply power.
4. The initial password of the system is “1234”, and the initial manager code is “123456”;
5. When batteries with power on and on standby, it displays the DATE, TIME and Power Status, If power off and after replacing the new battery, you need to re-setting the DATE, TIME.

CAUTION

1. Do not leave the master key and emergency key inside the safe box!
2. Please change the default password when using it for the first time.
3. Please replace the battery in time before the battery power is low.

Parts & Hardware List

ALWAYS keep the Main Key and DOT NOT leave the Emergency Keys inside the Safe Box

Opening the safe for the first time:

Step 1.
Take out the Main Key and Emergency Key from the package, and insert into the corresponding holes.
Step 2
Turn left the Emergency key first, then turn right the main key, after that turn right the Rotary Switches to open the door

Step 3.
Put the Put 4 AA batteries (not included in the original packaging) into the battery box.

Step 4.
Take out all the keys, open the door, and now you could start to set up your personal security code.

How to Setup Your Password

The initial password of the system is “1234”, and the initial manager code is “123456”;

Method 1:

1. Open the safe with password and standby
2. Press the set button behind the door, the screen will display”.
3. Enter 1-8 digits and then press “#” key to confirm The screen displays “into”, personal password reset successfully

Method 2:

1. Open the safe with password and standby
2. Press 00 and then press the set button behind the door, the screen will display “—–“
3. Enter 1-8 digits and then press “#” key to confirm
4. The screen displays “into”, manager password reset successfully

NOTE:

1. Clear Function:
   During setting or pressing your password, the “*” key is for you to delete the wrong number.

2. During your setting, if there is no press action on the digital key within 8 seconds, it will exit and back to the standby status, you have to re-setup!

3. Anti-peeping Function:
   Press the “*” key before entering the password, the screen displays a small sun icon, this time press password only displays “0”. After opening the safe box successful, the system will back to the password to be visible.

There are Two methods to open the safe box.

Method 1: Password + Main Key + Rotary Switches

1. When batteries on standby and the safe box in locked status,
   • Press the “#” key to wake up, when the LCD screen displays “”,
   • Enter the master password or manager password, and press the “#” key to confirm
   • Then insert the main key and twist to the right, turn the Rotary Switches to the right to open the door.
2. If the password is entered incorrectly, it will display “ERROR”, and then display”” again, and you can re-enter the password at this time;

Method 2: Main Key +Emergency Key + Rotary Switches

If you forget the password, or if batteries are power off, use the Main Key (turn right) +Emergency Key (turn left) + Rotary Switches (turn right) at the same time to open it.

Setup or Modify the System Date

1. With batterie on state, press the “*” key, now you can modify DATE and TIME. Tip: During your setting, if there is no press action on the digital key within 8 seconds, it will exit and back to the standby status, you have to re-setup!
2. Press the digital to enter “YEAR”-“MONTH”-“DAY”, “HOUR”: “MINUTE” (Total 10 number, the number of the corresponding position will flash), then automatically confirm, now setting successfully..
3. During the setting, press the “key, you can delete and modify the wrong number.
4. The valid digital coverage is as follow
   • Year: 00-99;
   • Month: 01~99;
   • Day: 01-99;
   • Hour: 00-23:
   • Minute: 00-59
5. Calendar years range from 2000 to 2099. If the battery is exhausted and after replace new batteries, you need to re-setting the system time and date.

Security Alarm Function:

1. Safe Box is locked status each time, press the “0” key, the screen displays “, now your safe box is in the Alarm status standby.
2. If there’s any Knocking on the safe box, there is alarm noising, and the screen displays the”:
3. Enter the correct password, the screen displays “OPEN”, the alarm status will be relieved

Assembly Steps for Mounting

1. Choose the place that you want to set the safe. Drill into the wall to make holes for the anchors. Choose a drill according to the size of the holes on the back and bottom of the safe.
2. Insert the plastic anchor into the holes.
3. Line up the holes of the safe with the anchor holes.
4. Drive the expansion screws from the inside of the safe tightly with a drill
   

Recommend Location or Methods for Mounting Your Safe Box

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>