XD Connects P513.62X Lightwave USB Rechargeable Torch with Crank Instruction Manual
- June 16, 2024
- xd connects
Table of Contents
XD Connects P513.62X Lightwave USB Rechargeable Torch with Crank
Specifications
- Product Name: Lightwave USB-rechargeable torch with crank
- Model Number: Not specified
- Manufacturer: XD Connects BV
- Country of Origin: Netherlands
- Power Source: USB-rechargeable battery
- Charging Method : Type-C input
- Light Source: LED
- Weight: Not specified
- Dimensions: Not specified
Product Usage Instructions
Charging the Torch
- Locate the Type-C input (2) on the torch.
- Connect the provided USB cable to the Type-C input (2) and the other end to a power source.
- The charging indicator (3) will illuminate to indicate that the torch is being charged.
- Wait until the charging indicator (3) turns off, indicating that the torch is fully charged.
- Disconnect the USB cable from the torch.
Turning the Torch On/Off
To turn the torch on or off, locate the ON/OFF button (1) and press it.
Using the Hand Crank
If the battery of the torch is low and you don’t have access to a power
source, you can use the hand crank (4) to generate power and charge the torch
manually.
- Grip the hand crank (4) firmly.
- Rotate the hand crank (4) clockwise or counterclockwise with a steady motion.
- The LED light (5) will start to illuminate as you crank, indicating that power is being generated.
- Continue cranking until the desired level of charge is achieved.
Opening the Torch
To access the internal components or replace the battery, follow these
steps:
- Grip the torch firmly.
- Twist the torch in a counterclockwise direction using the “Twist to Open” mechanism (6).
- The torch will separate into two parts, allowing access to the internal components.
Overview
- ON/OFF BUTTON
- TYPE-CIN
- CHARGING INDICATOR
- HAND CRANK
- LED LIGHT
- TWIST TO OPEN
SPECIFICATION
- Bulb: CREE LED
- Lumens: 120lms
- Wattage: 1W
- Beam distance: 20M
- Battery : 620 mAh
- Operating hours: 3h
- Charging hours: 2h
- Cable: Type-C 5V/1A
This torch is designed to provide reliable illumination in various situations, with the added benefit of a hand crank for emergency power generation. Please read the following instructions carefully and follow them to ensure that the product serves you safely and to your full satisfaction.
CHARGING INSTRUCTIONS
-
Connect the provided Type-C cable to the torch’s Type-C port and a compatible
USB power source (e.g., wall adapter, computer). -
The LED indicator will turn on, indicating that the torch is charging.
-
Once fully charged, the LED indicator will turn off.
-
It is recommended to charge the torch fully before first use.
HAND CRANK OPERATION
- In case of low battery or emergencies, the hand crank can be used to
- Terene hand crank in a clockwise direction at a steady, moderate pace. A minute of cranking typically provides several minutes of light.
CONTROLS: The Re-Chargeable torch has 3 main lighting modes: 50%-100%-flashing.
WARNING
- Ensure that the charging voltage matches the specifications.
- Do not attempt to charge the light in a damp environment.
- Do not disassemble, puncture, or expose the battery to extreme temperatures or open flames.
- Avoid leaving the lamp plugged in for extended periods after it has reached a full charge, as overcharging may reduce battery lifespan.
- Store the lamp in a cool, dry place away from direct sunlight or extreme temperatures.
- When transporting, ensure the lamp is switched off and securely stored to prevent accidental activation.
- This lamp is not waterproof. Avoid exposing it to water or moisture. Do not use it in wet or rainy conditions.
- Allow for proper ventilation during operation. Do not cover or obstruct the lamp’s vents, as this may lead to overheating.
- Use the lamp only for its intended purpose. Do not modify, alter, or repurpose it in any way.
- Do not look directly into the light source, especially when it is at full intensity, as it may cause temporary visual impairment.
- Keep out of reach of children and pets. The lamp contains small parts that may pose a choking hazard.
- Regularly inspect the lamp for any visible damage. If found, do not use the light until it has been inspected and repaired by a qualified technician.
- Follow local regulations and guidelines for the proper disposal of the light and its components, including the rechargeable battery.
- Do not leave the lamp unattended while in use, especially around flammable materials.
FAQ
Frequently Asked Questions
- Q: How long does it take to fully charge the torch?
- A: The charging time may vary depending on the battery capacity and the power source used. It is recommended to refer to the charging indicator (3) which will turn off when the torch is fully charged.
- Q: Is the hand crank charging method as efficient as USB charging?
- A: The hand crank charging method is designed for emergencies or when no power source is available. It may require more effort and time compared to USB charging. USB charging is recommended for regular use.
- Q: Can I replace the battery myself?
- A: Yes, you can replace the battery by following the steps mentioned in the “Opening the Torch” section. However, it is recommended to consult the user manual or contact customer support for battery replacement instructions specific to your model.
Declaration of Conformity
- XD Connects B.V. hereby declares that this product complies with the essential requirements and other relevant provisions of Derective 2014/30/EU.
- The complete Declaration of Conformity can be found at www.xdconnects.com > search on item number.
More Information
XD Connects B.V.
Lange Kleiweg 6-28
2288 GK Rijswijk, The Netherlands
1F, ICentrum, Holt Street,
Birmingham, B7 4BP, England