ImageYou LED Bathroom Mirror Installation Guide

ImageYou LED Bathroom Mirror

Product Specification

Dimension Power

• Lumens 2300LM
• Lumens 2600LM
• Lumens 2700LM
• Lumens 3000LM
• Lumens 4200LM
• Lumens 4900LM
• Lumens 5100LM
• Lumens 5600LM
• Lumens 6100LM
• Lumens 2500LM
• Lumens 3000LM
• Lumens 4000LM
• Lumens 3900LM
• Lumens 4800LM
• Lumens 5200LM
• Lumens 5500LM
• Lumens 5700LM
• Lumens 1800LM
• Lumens 2100LM
• Lumens 2500LM
• Lumens 2800LM
• Lumens 2100LM
• Lumens 2500LM

PARAMETER

• Color Temperature: 3000K-6000K
• Input Voltage: AC100-120V
• Output Voltage: DC 12/24V
• CRI: 90 Ra
• Working Temperature: 1045
• Life Span: 25000 hours
• Anti-fog: Yes
• Nema Rate: 3
• Wiring Method: Hardwired/Plugin
• Switch: Touch Sensor Switch

Installation Instruction

• DANGER: Before installation, make sure the main power is cut off.
• WARNING: Installation must be performed by a qualified licensed electrician.
• Note: Thank you very much for using our products. To facilitate the use of products, please read this instruction carefully before you begin the installation.

FUNCTION:

Please follow the below steps to achieve the functions:

• Switch on/off light by short-touching the button 1 or button 2.
• Adjusting color temperatures (CCT) between warm white and cool white by long-touching the button 1.
• Adjusting the brightness (Dimming) by long-touching the button 2.
• Switch on/off Defogger by short-touching the button 3.

Button Functions:

• Button 1: Light on/off and CCT functions
• Button 2: Light on/off and Dimming functions
• Button 3: Defogger function

Installation

• Tape Measure
• Spirit Level
• Pencil
• Electric Drill
• Cross Head Screwdriver
• Hammer

INSTALLATION STEPS

STEP 1

• Before installation, please lift the mirror against the wall, keep an appropriate safety distance from the faucet, confirm the installation position and installation height of the bracket, use a spirit level to level the bracket, and mark the hole position on the wall.
• The mirror can be hung horizontally or vertically. You can choose the hanging method according to your preference. Here is the horizontal hanging installation method, the vertical hanging is the same.

STEP 2

• Use an electric drill to punch holes at the marked spots, and then apply wall anchors with a hammer.

STEP 3

• Fasten the bracket to the wall with screws.
• BLACK WIRE– -POWER SUPPLY L (LIVE)
• WHITE WIRE— POWER SUPPLY N (NEUTRAL)
• GREEN WIRE– -POWER SUPPLY E (EARTH)
• WARNING: This mirror must be earthed.

STEP 4

Connect the power. You can use the plug directly or connect the wire to a standard switch lighting circuit.

CONTACT US

Note: After opening the package, please inspect the product immediately for damage in transit or missing parts. If there is any missing, please contact us or you can contact us at Amazon by following these steps:

1. Open Orders at Amazon
2. Find the product you have purchased and open the product page
3. Click sold
4. Click Ask a question
5. Click An order I have placed
6. Click Your product
7. Click Other
8. Click Troubleshooting

Then you can send us messages, and we will reply within 24 hours.

FAQ

Q: What is the working temperature range of the LED Mirror?

• A: The LED Mirror has a working temperature range of 1045.

Q: Can I hang the mirror vertically?

• A: Yes, the mirror can be hung horizontally or vertically according to your preference.

Q: How long is the lifespan of the LED Mirror?

• A: The LED Mirror has a lifespan of 25000 hours.

PRODUCT SPECIFICATION

CONTACT US

• Note: After opening the package, Please inspect the product immediately for damage in transit or missing parts. If there is any missing, Please contact us or you can contact us at Amazon by following these steps:
• Open “Orders” at Amazon
• Find the product you have purchased and open the product page
• Click sold -Click “Ask a question”
• Click “An order I have placed”
• Click “Your product” -Click “Other” -Click “Troubleshooting”
• Then you can send us messages, and we will reply within 24 hours.

PACKING LIST

BEFORE INSTALLATION

• DANGER: Before installation, make sure the main power is cut off.
• WARNING: Installation must be performed by a qualified licensed electrician.
• Note: Thank you very much for using our products, to facilitate the use of products, please read this instruction carefully before you begin installation.

IMPORTANT INSTRUCTIONS:

• Please read all instructions carefully before assembling the item.
• This product contains glass parts. Take care while fitting or handling to prevent personal injury or damage to the product; If the glass is broken, please stop using it and replace it from the agent or manufacturer.
• Disconnect power before installing, adding, or changing any components.
• Ensure the mounting surface is dry and strong enough to bear four times the weight of the product for safe fitting.
• To connect the wires to the electrical junction box, a qualified technician or electrician is highly recommended.
• Special care should be taken when drilling walls to avoid hidden pipes or electrical cables.
• The product covers the outlet box and the wirings after installation.
• Keep the voltages between 100V and 120V. If the voltage exceeds 120V, please use a transformer.

FUNCTION

• Please follow the below steps to achieve the functions.
• Switch on/off light by short-touching the button 1 or button 2 .
• Adjusting color temperatures (CCT) between warm white and
• Adjusting the brightness (Dimming) by long-touching the button 2.
• Switch on/off Defogger by short-touching the button 3 .
• Switch on/off light by short-touching the button 1.
• Adjusting the brightness (Dimming) by long-touching the button 1 .
• Switch on/off Defogger by short-touching the button 2 .

INSTALLATION

INSTALLATION TOOLS

INSTALLATION STEPS

STEP 1

• Before installation, please lift the mirror against the wall, keep an appropriate safety distance from the faucet, confirm the installation position and installation height of the bracket, use a spirit level to level the bracket, and mark the hole position on the wall.
• The mirror can be hung horizontally or vertically. You can choose the hanging method according to your preferences. Here is the horizontal hanging installation method, the vertical hanging is the same.

STEP 2

• Use an electric drill to punch holes at the marked spots, and then apply wall anchors with the hammer.

STEP 3

• Fasten the bracket to the wall with screws.

STEP 4

• Connect the power.You can use the plug directly or connect the wire to a standard switch lighting circuit.
• Use plug After hanging the mirror,Plug the AC wire into the receptacle on the wall.

Installation hardwired

• Cut the plug and connect the wires of mirror with the main power by the wire connectors.
• DANGER: Before installation, make sure the main power is cut off.
• BLACK WIRE—POWER SUPPLY L (LIVE)
• WHITE WIRE—POWER SUPPLY N (NEUTRAL)
• GREEN WIRE—POWER SUPPLY E (EARTH)
• WARNING: This mirror must be earthed.

STEP 5

• Hang the mirror on the bracket and shake it gently to ensure that the mirror is securely installed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>