SENCORE SDH 1210WH Smart Dehumidifier and Air Purifier Instruction Manual
- June 16, 2024
- SENCORE
Table of Contents
SENCORE SDH 1210WH Smart Dehumidifier and Air Purifier
Product Information
Product Overview
The SENZOR SDH 1210WH is a device designed to dehumidify and purify the air
within indoor environments. It features a cylindrical white body with a
control panel on the top.
Important Safety Instructions
These instructions are crucial for the safe operation and maintenance of
the device. They include guidelines for proper storage, handling, and usage to
prevent accidents and ensure the longevity of the device.
Specifications
- Model: SDH 1210WH
- Power: 205 W
- Current: 0.83 A
- Dehumidification Capacity: 1.95 l/kWh
- Rated Current: 2.1 A
- Rated Voltage: 6.3 A/250 V
- Refrigerant: R290/45 g
| Parameter | Specification |
|---|---|
| Voltage | 220-240V~, 50 Hz |
| Dehumidifying Capacity | 12 L/24 h (30 °C/80 % RH) |
| Power Consumption | 205 W |
| Current | 0.83 A |
| Energy Factor EEV | 1.95 L/kWh |
| Starting Current | 2.1 A |
| Fuse | T.6.3 A/250 V |
| Refrigerant Type and Charge | R290/45 g |
| Global Warming Potential (GWP) | 3 |
| CO2 Equivalent | 0.00018 |
| Air Flow Volume | 100/90/80 m³/h (high/medium/low) |
| Noise Level | 45 dB(A) |
| Dimensions | 295 x 295 x 560 mm |
| Net Weight | 12.3 kg |
| Operating Temperature | 5-35 °C |
| Recommended Room Size | 18-30 m² |
Description of Parts and Controls
The SDH 1210WH is a dehumidifier and air purifier that helps improve indoor air quality by removing excess moisture and purifying the air. It is equipped with Wi-Fi capabilities for remote control and monitoring.
A. Dehumidifier and Air Purifier
- Top Cover
- Body of the device
- Base with wheels
B. Control Panel
- Wi-Fi Indicator
- Display showing current humidity level
- Target humidity level buttons
- Timer settings
- Power button
- Additional function keys
C. Precautions and Usage
- Do not allow children to use the device without adult supervision.
- If the power cord is damaged, it must be replaced by an authorized service center or a qualified person.
- The device must be installed in accordance with national installation regulations.
- Do not block air inlets or outlets.
- Do not use the device near sources of heat or open flames.
Wi-Fi
The SDH 1210WH can be connected to your home Wi-Fi network for remote control and monitoring. You can use a mobile app to adjust settings and receive notifications about the device’s status.
Product Usage Instructions
Installation
- Choose a suitable location for the dehumidifier, preferably near a power outlet.
- Ensure that there is proper ventilation around the device.
- Plug the device into a power outlet.
Setting up Wi-Fi
- Download and install the mobile app for the SDH 1210WH.
- Follow the app’s instructions to connect the dehumidifier to your home Wi-Fi network.
- Once connected, you can use the app to control the device remotely.
Operating the Dehumidifier
- Press the power button to turn on the dehumidifier.
- Use the control panel or the mobile app to adjust the desired humidity level.
- The dehumidifier will automatically start removing excess moisture from the air.
- Monitor the device’s status and adjust settings as needed using the control panel or the mobile app.
Maintenance
- Regularly clean the air filter to ensure optimal performance.
- Replace the H11 filter when necessary.
- Keep the device away from direct sunlight and heat sources.
- Periodically check and clean the air vents to prevent blockages.
Contact Information
For more information on the SENZOR SDH 1210WH dehumidifier and air purifier, visit www.sencor.eu for design and quality details.
Frequently Asked Questions (FAQ)
What should I do if the dehumidifier stops working?
Check the temperature and humidity levels on the display. If they are within the recommended range, ensure that the air intake and outlet vents are not blocked. If the issue persists, contact customer support for further assistance.
What does error code E1 mean?
Error code E1 indicates a temperature sensor malfunction. Turn off the dehumidifier and contact customer support for troubleshooting and repair.
How often should I replace the H11 filter?
The H11 filter should be replaced when it becomes dirty or clogged. The frequency of replacement depends on usage and environmental conditions. It is recommended to check the filter every 3-6 months and replace it if necessary.
Can children operate the SENZOR SDH 1210WH?
Children aged 8 and older can use the device under adult supervision.
What should I do if the power cord is damaged?
The power cord should be replaced by an authorized service center or a qualified person to prevent safety hazards.
Where should the device be installed?
Install the device in a well-ventilated area, away from heat sources and in accordance with national installation regulations.
Is it necessary to keep air inlets and outlets clear?
Yes, always ensure that air inlets and outlets are not blocked to allow for proper air flow and device functionality.
Can the device be used near an open flame?
No, do not use the device near open flames or heat sources to prevent fire risks.